Product Overview
Sylvania 75500 LED17T8L48FG830SUBG7 — SubstiTUBE® Value Generation 7 4 ft T8 LED Tube, 17W, 2100 Lumens, 3000K
The Sylvania LED17/T8/L48/FG/830/SUB/G7 (item number 75500) is a 4 ft SubstiTUBE® Value LED T8 lamp with a G13 medium bi-pin base and an optimized glass optic. It is designed to operate on existing instant start and select programmed rapid start (parallel wiring) electronic T8 ballasts (120-277V and 347V), drawing 17W and producing 2100 lumens at 3000K and 82 CRI. Rated life is 36,000 hours to L70 with a 3-year limited warranty (24/7 operation). Because the ballast stays in the circuit, no rewiring is required, but the ballast must be a compatible electronic type. Output depends on the operating ballast. Confirm ballast model, lamp holder type, and fixture length before ordering.
| Wattage 17W | Typical Lumens 2100 lm | Color Temp 3000K | Ballast IS / PRS | Rated Life (L70) 36,000 hrs |
Technical Specifications
| Brand | Sylvania (LEDVANCE) |
| Item Number | 75500 |
| Ordering Abbreviation | LED17/T8/L48/FG/830/SUB/G7 |
| Product Family | SubstiTUBE® Value LED T8 (Generation 7 order code) |
| Lamp Type | Ballast-compatible LED T8 (instant start / select programmed rapid start, parallel wiring, electronic T8 ballasts) |
| Base | G13 medium bi-pin |
| Length | 4 ft |
| Bulb Finish | Frosted glass |
| Lamp Power | 17W (rated on QHE1x32T8/UNV ISN) |
| Typical Lumens | 2100 lm (rated on QHE1x32T8/UNV ISN; output depends on the operating ballast) |
| Color Temperature | 3000K |
| CRI | 82 |
| R9 | Up to 21 |
| Beam Angle | 220° |
| Rated Life (L70) | 36,000 hours |
| Ballast Input Voltage | 120-277V and 347V |
| Dimming | Not designated as a dimmable model |
| Power Factor | >0.90 |
| Total Harmonic Distortion | <20% |
| EMI / RFI | FCC Title 47 CFR, Part 18, Non-Consumer |
| Ambient Operating Temperature | -4°F to 122°F (-20°C to 50°C) |
| Location Rating | Dry and damp locations; cannot come in direct contact with water |
| Maximum Lamp-to-Ballast Distance | 20 feet |
| Overall Length (pin end to pin end) | 47.725" ± 0.055" (1212.2mm ± 1.4mm) |
| Base Face to Opposite Base Pin | 47.45" ± 0.05" (1205.25mm ± 1.25mm) |
| Base Face to Base Face | max 47.22" (1199.4mm) |
| Bulb Outside Diameter | 1.02" ± 0.08" (25.9mm ± 2.0mm) |
| Package Quantity | 10 |
| Warranty | 3-year limited lamp warranty (24/7 operation) |
| System Performance — QHE1X32T8/UNV ISN (1 lamp) | 20.0W; 2,200 lm; 110 lm/W (0.17 / 0.08 A) |
| System Performance — QHE2X32T8/UNV ISN (2 lamps) | 40.0W; 4,300 lm; 108 lm/W (0.34 / 0.15 A) |
| System Performance — QHE1X32T8/UNV ISL (1 lamp) | 16.5W; 1,850 lm; 112 lm/W (0.14 / 0.06 A) |
| System Performance — QHE2X32T8/UNV ISL (2 lamps) | 33.0W; 3,700 lm; 112 lm/W (0.28 / 0.12 A) |
| System Performance — Other Ballasts | ISN 3 and 4 lamp, ISL 3 and 4 lamp and ISH 1 to 3 lamp system data is listed in the manufacturer datasheet |
Product Overview
SubstiTUBE Value LED T8 lamps are an energy-saving alternative designed to replace traditional fluorescent T8 lamps. They contain no mercury, provide instant light and a uniform light distribution with an optimized glass optic design, and minimize labor costs because they run on the existing compatible electronic ballast. The datasheet lists energy consumption reductions of up to 34%.
Because the lamp is not affected by switching cycles, occupancy or vacancy sensors can be used with the existing instant start ballast for added energy savings, and there is no warm-up time: the lamp is instant-on with stable lamp-to-lamp color. Lumens per watt is up to 112 on the system data.
This order code is factory-set to 3000K at 2100 typical lumens (17W). Other color temperatures in the same 4 ft 17W family are LED17/T8/L48/FG/835/SUB/G7 (3500K, item 75501, 2100 lm), LED17/T8/L48/FG/841/SUB/G7 (4100K, item 75502, 2200 lm), LED17/T8/L48/FG/850/SUB/G7 (5000K, item 75503, 2200 lm).
Compatible Applications
- Cove lighting
- Display cases
- General illumination
- Parking garages
- Tunnels
- Fluorescent T8 retrofits keeping the existing compatible electronic ballast
- Spaces using occupancy sensors
- Dry and damp locations
Before Ordering — Verify
- Confirm the existing ballast is a compatible electronic instant start or select programmed rapid start (parallel wired) T8 ballast with 120-277V or 347V input. Because of the number of ballast designs and topologies, test the lamp on existing ballasts before installing mass quantities.
- Do not use with older dedicated voltage (120V only or 277V only) ballasts — their electronic components degrade over time and may become unsuitable for the lamp.
- Confirm lamp holder type. For instant start ballasts, use lamp holders with an internal shunt or wired in a shunt configuration. For programmed rapid start ballasts (parallel wired), use rapid-start (non-shunted) lamp holders.
- De-lamping: not allowed for ISH ballasts. For approved ISN and ISL ballasts, de-lamping is allowed for only one lamp so long as the ballast factor remains below 1.20.
- Confirm the ballast is mounted within 20 feet of the lamp.
- This lamp is not designated as dimmable.
- Confirm fixture length. This is a 4 ft lamp with an overall length of 47.725" ± 0.055" (1212.2mm ± 1.4mm).
- Color temperature — this item is 3000K. Siblings in the same family: LED17/T8/L48/FG/835/SUB/G7 (3500K, item 75501, 2100 lm), LED17/T8/L48/FG/841/SUB/G7 (4100K, item 75502, 2200 lm), LED17/T8/L48/FG/850/SUB/G7 (5000K, item 75503, 2200 lm).
- Confirm ambient conditions stay within -4°F to 122°F (-20°C to 50°C) and that the lamp will not come into direct contact with water.
- Confirm package quantity — this item is supplied 10 per package.
- The datasheet does not list a DLC qualification for this item; confirm with the factory if a utility rebate is involved.
Safety and Handling Guidelines
- Turn off power to the fixture before installing, inspecting, or maintaining lamps.
- Install and operate in compliance with the National Electrical Code, Underwriters Laboratories requirements, and all applicable local codes.
- Insert and align the tube fully in the lamp holders. Partial insertion causes poor or intermittent electrical contact, which can produce short lamp life and arcing, and arcing at the lamp holder can cause localized overheating.
- Read all installation instructions before attempting installation.
- Do not install on older dedicated single-voltage ballasts.
- This lamp has a glass body. Handle by the end caps, avoid impact, and do not install a lamp with visible damage.
- Operate only in dry or damp locations. The lamp must not come into direct contact with water.
- This lamp contains no mercury and emits no UV. Recycle or dispose of it in accordance with local requirements.
Compliance
- FCC Title 47 CFR Part 18, Non-Consumer.
- No UV emission; mercury free.
- 3-year limited lamp warranty based on 24/7 operation.
Ordering Information
- Item Number: 75500
- Ordering Abbreviation: LED17/T8/L48/FG/830/SUB/G7
- UPC: 046135755002
- Brand: Sylvania (LEDVANCE)
- Package Quantity: 10
- Lamp: 4 ft T8, G13 medium bi-pin, 17W, 2100 lm, 3000K, 82 CRI
- Rated Life: 36,000 hours (L70)
- Dimming: Not designated dimmable
- Ballast Requirement: Compatible instant start or select programmed rapid start (parallel wired) electronic T8 ballast
For wholesale pricing, bulk availability, or help confirming the correct replacement lamp, contact ADL Supply at 1-800-235-3489.
