Product Overview
GE 39503 100R30/CL 12V 100W Low Voltage R30 Clear Reflector Pool Light - E26 Base
High-quality 100-watt low voltage incandescent reflector lamp designed for swimming pool, spa, and wet location applications. Features clear R30 bulb with brass E26 medium base, delivering 1,200 lumens of bright white light. 12V operation ensures safety in wet environments with 2,000-hour rated life.
Technical Specifications
Order Code:39503
Description:100R30/CL or R30CL100/12V
Wattage:100W
Voltage:12V (Low Voltage)
Amperage:8.33A
Bulb Type:R30 Reflector Flood
Bulb Finish:Clear
Base Type:Brass E26 Medium Screw Base
Filament:C-6 Coil
Initial Lumens:1,200 lumens
Beam Spread:35° - 50° Flood Pattern
Maximum Overall Length (MOL):5.37 inches (137 mm)
Bulb Diameter:3.75 inches (96 mm)
Rated Average Life:2,000 hours
Certification:UL Listed for Wet Locations
UPC:043168395038
Manufacturer:GE Lighting (General Electric)
Key Features
- 12V low-voltage operation for maximum safety in wet environments
- Clear finish provides maximum light output and transmission
- Brass E26 medium base resists corrosion in pool and spa environments
- Durable construction withstands heat and humidity
- Instant full brightness - no warm-up time required
- Easy screw-in installation in standard E26 sockets
- Flood beam pattern (35-50°) for wide area illumination
- 2,000-hour rated life reduces maintenance frequency
Primary Applications
- In-ground swimming pool lighting (wet niche fixtures)
- Spa and hot tub illumination
- Outdoor landscape and garden lighting
- Water feature and fountain accent lighting
- Patio and deck lighting systems
- Low-voltage security and pathway lighting
- Recessed downlighting in damp locations
Safety Information
IMPORTANT SAFETY WARNINGS
- Low Voltage Only: This lamp operates at 12V only - requires a compatible 12V transformer. DO NOT connect directly to 120V household current.
- Wet Location Use: Designed for use in wet location fixtures only. Fixture must be properly sealed and rated for pool/spa use.
- Professional Installation Recommended: Pool and spa lighting should be installed by qualified electricians familiar with NEC Article 680 (Swimming Pools, Fountains, and Similar Installations).
- GFCI Protection Required: All pool lighting circuits must be protected by Ground Fault Circuit Interrupter (GFCI).
- Transformer Required: Must be used with a 12V transformer specifically rated for pool and spa applications.
Alternate Part Numbers
Also known as: R30CL100/12V, 100R30/CL-12, BR30CL100/12V, FG 3045-1, 1C544
Cross-references: Halco BR30CL100/12V, Sylvania 100R30/CL/12V
Installation & Operating Notes
- Use only in fixtures rated for R30 reflector lamps
- Ensure fixture is properly sealed for wet location use
- Verify transformer output is 12V before installation
- Turn power off at breaker before installation or removal
- Allow lamp to cool before handling (operates at high temperatures)
- Do not use if glass is scratched, cracked, or damaged
- Not for use with dimmers unless specifically rated for low voltage operation
