Product Overview
Sylvania 65737 4" Selectable LED Retrofit Baffle Reflector Type Downlight
5CCT Selectable (2700K-5000K)3-Way Brightness (500-700lm)ENERGY STAR Certified 90+ CRI Wet Rated Dimmable
Product Specs
- Replaces: 40W-65W incandescent
- Uses: 9W (87% energy savings)
- Base: E26 screw-in (standard lightbulb base)
- Fits: 4" recessed housings
- Life: 50,000 hours (22+ years)
- Color Quality: 90+ CRI
The only downlight you need: Sylvania's 65737 (Model: LEDRT.../BA) is a 4-inch LED retrofit with switches that let you choose 5 color temperatures (2700K-5000K) and 3 brightness levels (500/600/700 lumens) in one fixture. Screw it in like a lightbulb—no electrician needed.
Why Choose This Model?
- No guessing on color temp: Flip switches on the back to test 2700K (cozy) through 5000K (daylight) before final install. Perfect if you're unsure about "warm vs cool" lighting.
- Adjust brightness per room: 500lm for ambiance, 700lm for kitchens/tasks—set it once, done.
- Bathroom safe: Wet-rated for showers and outdoor soffits (in approved housings).
- Dims smoothly: Works with standard dimmers down to 10% (no flicker).
Settings Guide
Lumen Output (Brightness)
- 500lm = Accent/ambient (40W equivalent)
- 600lm = General room light
- 700lm = Task lighting (65W equivalent)
Color Temperature (Mood)
- 2700K-3000K = Living rooms, bedrooms (warm)
- 3500K-4000K = Kitchens, offices (neutral)
- 5000K = Laundry, commercial (daylight)
Important Installation Notes
- Must support 1 lb weight: Only use in housings rated for ceiling fans or heavy fixtures
- Not for emergencies: Cannot be used in exit signs or emergency circuits
- Check dimmer compatibility: Use LED-compatible dimmers for best 10% dimming performance
Warranty & Certifications
5-Year Limited Warranty | cETLus Listed | FCC | RoHS | Title 24/20 Compliant | ENERGY STAR® V2.0
Quick FAQ
How do I change the settings? Small switches on the back of the fixture (accessible before install or by removing trim). No WiFi, no apps.
Can I use this in my shower? Yes—wet rated when installed in appropriate housings.
Will this fit my old can lights? Fits standard 4" recessed housings with E26 screw-base sockets (most common).
