Sylvania 47335 LU150/MULTI-KIT

Sylvania LU150MULTI-KIT Lumalux — 150W HPS Magnetic Core & Coil Ballast Kit, 4-Tap 120/208/240/277V, HX-HPF

The Sylvania LU150MULTI-KIT Lumalux is a 150-watt High Pressure Sodium magnetic core and coil ballast kit from Sylvania, designed to operate a single 150W S55 HPS lamp in commercial and industrial HID fixtures. This complete kit includes the core and coil, capacitor, and pulse ignitor. 4-tap multi-voltage input covers 120V, 208V, 240V, and 277V. HX-HPF (High Reactance, High Power Factor) circuit type, pulse ignitor starting method, ANSI S55, -40°F minimum starting temperature. Includes installation instructions. Verify lamp wattage, ANSI code, and voltage tap before ordering.

Technical Specifications

Product Overview

The Sylvania LU150MULTI-KIT is a complete replacement ballast kit for 150W S55 High Pressure Sodium fixtures, supplying the three core electrical components as a matched set: the magnetic core and coil, the capacitor, and the pulse ignitor. Replacing all three components together as a kit, rather than individually, ensures proper electrical matching and restores full rated performance and starting reliability to the fixture.

The 4-tap design covers 120V, 208V, 240V, and 277V inputs from a single kit, allowing one part number to service fixtures across the most common commercial and industrial branch circuit voltages — confirm the correct tap is wired during installation. HX-HPF circuit type provides high power factor operation with reactor-based current limiting, the traditional and reliable magnetic ballast topology for HPS fixtures. The -40°F minimum starting temperature makes this kit suitable for unheated outdoor fixtures in cold climates.

Compatible Applications

• Outdoor area and street lighting fixture maintenance — Replacement ballast kit for 150W S55 HPS cobra-head, wall pack, and area light fixtures.
• Industrial and commercial HID fixture rebuilds — Complete electrical component replacement for aging or failed 150W HPS ballast assemblies.
• Cold-climate outdoor installations — -40°F rated starting temperature for unheated exterior fixtures.

Before Ordering — Verify

• ANSI Code: Confirm your lamp and existing ballast are rated for S55 (150W HPS).
• Lamp Wattage: Confirm fixture and lamp are 150W HPS — this kit is not interchangeable with other HPS wattages.
• Input Voltage: Confirm your circuit voltage matches one of the four available taps: 120V, 208V, 240V, or 277V.
• Kit vs. Component Replacement: This is a full kit (core & coil, capacitor, ignitor) — confirm whether your repair calls for full kit replacement or an individual component.
• Physical Fit: Confirm 3.94" x 2.81" x 3.85" fits within your fixture's ballast housing.

Safety and Installation Guidelines

• High Voltage Pulse Warning: A high voltage pulse is present on the open circuit. Ground the ballast core and the metallic case of the capacitor and ignitor before servicing.
• Disconnect power before installing or servicing.
• Install in accordance with National Electric Code and local electrical codes.
• Follow the included installation instructions and wiring diagram for correct voltage tap selection.

Ordering Information

• Brand: Sylvania — Lumalux
• Model: LU150MULTI-KIT
• Lamp Compatibility: (1) 150W S55 HPS
• Input Voltage: 4-Tap 120/208/240/277V
• Packaging: Sold individually.
• Case quantities and bulk pricing: Contact ADL Supply for volume orders.

For wholesale pricing, bulk availability, or help confirming the correct replacement ballast kit, contact ADL Supply at 1-800-235-3489.