GE 10322 F32T8XLSPX35HLEC

The GE 10322 F32T8XLSPX35HLEC is a high-lumen 32W T8 linear fluorescent lamp from the GE Starcoat® SPX XL series, engineered for commercial offices, healthcare facilities, educational institutions, and retail environments requiring approximately 10% more light output than standard T8 lamps at the same 32W wattage. Delivering 3,100 initial lumens of 3500K natural white light at 85 CRI with 94% lumen maintenance at 40% of rated life, this lamp utilizes STARCOAT® multi-layer phosphor technology and a G13 medium bi-pin base to provide a 40,000-hour rated service life with TCLP-compliant low-mercury construction.

ADL Supply Expert Application & Replacement Guide

The GE F32T8XLSPX35HLEC (Order Code 10322) is primarily specified by electrical contractors and facility managers for commercial office troffers, healthcare corridor fixtures, institutional classroom grids, and retail ceiling systems where the XL High-Lumen output advantage — approximately 10% more light than a standard F32T8 at the same 32W wattage — allows designers to maintain target illuminance levels while reducing fixture count or ballast factor during lighting power density optimization projects. This lamp is compatible with both instant-start and programmed-start electronic ballasts, but the lampholder type must match the ballast: instant-start ballasts require un-shunted (non-shunted) bi-pin lampholders; programmed-start ballasts require shunted bi-pin lampholders. Confirm your fixture's existing lampholder type when retrofitting, particularly when changing ballast start methods. The 94% lumen maintenance at 40% of rated life confirms the STARCOAT® multi-layer phosphor coating sustains output consistency well into the lamp's service period — a significant advantage over standard T8 lamps in applications where consistent illuminance levels are specified rather than just initial output. This lamp is TCLP compliant, qualifying spent lamps for non-hazardous waste disposal treatment in applicable jurisdictions and reducing disposal costs for large commercial relamping programs.

Before You Order

Detailed Product Specifications

• Brand: GE Lighting (Current)
• Product Line Series: Starcoat® SPX XL High-Lumen T8
• Manufacturer Part Number: F32T8XLSPX35HLEC
• GE Order Code: 10322
• UPC Barcode: 043168103220
• ANSI Standard: ANSI C78.81
• Core Technology: T8 Linear Fluorescent — STARCOAT® Multi-Layer Phosphor
• Ballast Requirement: Electronic ballast rated for 32W T8 — instant-start or programmed-start
• Wattage: 32W
• Initial Lumens: 3,100 lm (approximately 10% above standard F32T8)
• Lumen Maintenance: 94% at 40% of rated life
• Color Temperature (CCT): 3500K Natural White
• Color Rendering Index (CRI): 85 Ra
• Base Type Configuration: G13 Medium Bi-Pin
• Tube Diameter: T8 — 1.0 inch (25.4mm)
• Maximum Overall Length (MOL): 47.78 inches (1213.6mm)
• Nominal Length: 48 inches / 4-foot class
• Start Type: Instant Start or Programmed Start compatible
• Burn Position: Universal — Any Orientation
• Rated Average Lifespan: 40,000 Hours
• Environmental Rating: TCLP Compliant — low-mercury, non-hazardous waste qualified
• RoHS Compliant: Verify with GE specification sheet

Operation, Safety & Mounting Compliance

Lampholder Type, Ballast Compatibility & High-Lumen Output Context

As with all 4-foot T8 linear fluorescent lamps, the lampholder type must match the ballast starting method. Instant-start electronic ballasts apply high open-circuit ignition voltage directly across the lamp pins — requiring un-shunted lampholders where both pin contacts within each socket are electrically isolated. Programmed-start ballasts preheat the cathodes before arc ignition — requiring shunted lampholders where both contacts are internally connected. Installing the wrong lampholder type for the ballast causes non-ignition or premature lamp failure. The XL High-Lumen designation means this lamp produces approximately 10% more light at rated wattage than a standard F32T8 due to the STARCOAT® multi-layer phosphor formulation — confirm that the higher lumen output is appropriate for the application's illuminance targets before specifying as a direct replacement in fixtures that were designed around standard T8 output levels.

TCLP Compliance, Mercury Content & Disposal

This lamp contains mercury and must be recycled through a certified lamp recycling program in compliance with applicable federal, state, and local regulations. The TCLP-compliant formulation means the mercury content passes EPA Toxicity Characteristic Leaching Procedure thresholds, qualifying spent lamps for non-hazardous waste disposal in applicable jurisdictions and potentially reducing disposal costs for large commercial relamping programs. Regardless of TCLP status, lamp recycling through a certified program remains best practice and a regulatory requirement in most states. For a certified recycler, visit lamprecycle.org. This product cannot be shipped to CA, CO, HI, ME, MN, OR, RI, or VT.

Industry Cross-Reference Data

• Sylvania: FO32/835/XL/ECO (equivalent 32W 3500K high-lumen T8 extended life)
• Philips: F32T8/TL835/ALTO (equivalent 32W 3500K T8 high-output platform)
• Osram: F32T8/835/XL (equivalent 32W natural white high-lumen T8)
• Legacy Cross-Reference: Direct high-lumen upgrade replacement for standard F32T8/835 4-foot T8 lamp positions in electronic ballast commercial troffer, strip, and institutional fixture installations

Bulk Commercial Lighting Supply & Project Support

ADL Supply delivers commercial-volume logistical fulfillment, tiered commercial contractor discounting strategies, and full pallet project quoting options to electrical accounts across the United States.

For formal wholesale inquiries, volume pricing modifications, or manufacturer spec sheet documentation, reach our commercial branch directly at 1-800-235-3489. We are your commercial supply partners as an authorized wholesale Lighting Distributor In Doral, Florida.