GE 14675 LU400/ECO/NC

GE 14675 LU400/ECO/NC — 400W Non-Cycling HPS Lamp, E39 Base

The GE 14675 LU400/ECO/NC is a 400-watt Ecolux® NC non-cycling HPS lamp with a ED18 bulb and E39 Mogul Screw base, designed for HPS ballast circuits rated ANSI S51. It delivers 54,000 initial lumens at 2100K and is rated for 40,000 hours.

Technical Specifications

Product Overview

The GE LU400/ECO/NC is a 400-watt Ecolux® NC non-cycling HPS lamp. It ships with a ED18 bulb envelope on a E39 Mogul Screw base and is built to operate on an HPS ballast rated ANSI S51. Output is 54,000 initial lumens (48,600 mean lumens) at 2100K and 30 CRI, with a warm amber HPS color.

The Ecolux® NC non-cycling feature makes locating and replacing end-of-life lamps quick and easy. These lamps are low-mercury, pass TCLP, use a lead-free base, and deliver 6%–11% higher initial lumens than standard HPS in the 100W and 400W versions per GE.

Not recommended for: retail displays, color-critical inspection environments, or any application requiring CRI above 30.

Compatible Applications

• Typical uses (per GE): Industrial, roadway, and security lighting.
• Fixtures wired for an HPS ballast rated ANSI S51 with a E39 Mogul Screw socket.
• Direct replacement for existing 400W HPS lamps with the same base and ballast rating. Verify ballast compatibility before ordering.
• Burning position: U (Universal — any burning position).

Before Ordering — Verify

• ANSI / Ballast Code: Confirm the existing lamp or ballast label matches S51.
• Wattage: Confirm the fixture is rated for 400W.
• Base Type: Confirm the socket matches E39 Mogul Screw.
• Ballast Compatibility: This lamp requires an HPS-rated ballast and ignitor. It will not operate on a metal halide or mercury vapor ballast.
• Burn Position: HPS lamps are not position-sensitive — no orientation restriction.
• Physical Fit: Confirm lamp shape (ED18), length (9.75" MOL), and clearance against the existing lamp or fixture manual.
• Confirm order code 14675 (GE LU400/ECO/NC) exactly matches the lamp or ballast label on your existing fixture before purchasing a replacement.
• Case pack quantity is 12; confirm this meets your order needs.

Safety and Handling Guidelines

• Correct Ballast Required: Use only with an HPS-compatible ballast and ignitor rated for this lamp. An incompatible ballast can cause lamp failure or fixture damage.
• Vacuum Jacket: This is a vacuum jacket lamp and may implode if broken. Wear safety glasses and gloves when installing or removing the lamp, and allow it to cool fully first.
• Sodium Content: The lamp contains sodium — avoid skin contact with broken pieces (chemical burn risk).
• Warm-Up / Restrike: Per GE, HPS lamps take about 3–4 minutes to reach 90% light output after starting, and about 1 minute after a brief power interruption.
• Approved Fixtures Only: Install only in fixtures rated for the listed lamp type, wattage, and operating position; do not use if the outer glass is scratched or broken.
• Mercury Content: Contains mercury. Do not dispose of in regular trash; recycle through an approved lamp recycling program in accordance with federal, state, and local regulations.

Compliance

• Ecolux® lamps use a lead-free base and pass TCLP per the GE catalog, which can lower disposal costs.
• Contains mercury — subject to applicable lamp recycling and disposal regulations. California, Washington, and other states may have mandatory take-back or handling fee requirements.
• Verify additional certifications (UL, Title 20, Prop 65) with the GE specification sheet prior to use in regulated installations.

Ordering Information

• GE Order Code: 14675
• GE Model: LU400/ECO/NC
• UPC / EAN: 043168146753
• ANSI Ballast Type: S51
• Wattage / CCT: 400W / 2100K
• Base: E39 Mogul Screw
• Case Pack Quantity: 12
• Packaging: Sold individually; case-pack pricing available on request.

For wholesale pricing, bulk availability, or help confirming the correct replacement lamp, contact ADL Supply at 1-800-235-3489.