GE 68968 GE232-MVPS-L-S30 T8 T8 Bi-Level Program Start Step Dimming Ballast

GE 68968 GE232-MVPS-L-S30 Bi-Level Step Dimming Ballast – 2 or 1 Lamp F32T8 – 120-277V

The GE 68968 GE232-MVPS-L-S30 is a GE UltraStart electronic T8 dimming ballast designed for commercial fluorescent lighting systems requiring program-start step dimming. This ballast operates 2 or 1 F32T8 lamps with 120-277V universal input and provides 100% / 30% bi-level step dimming.

This is not a 120-lamp ballast. The S30 suffix identifies the step-dimming family, not the lamp quantity. The L in the model identifies the low ballast factor version, making this ballast a good option when lower light output and energy savings are desired.

Product Overview

The GE232-MVPS-L-S30 is designed for commercial T8 fixtures where lower light output and energy savings are needed through a step-dimming control strategy. The ballast switches between full output and a reduced output level, helping lower operating costs while keeping the space illuminated.

Program-start operation helps extend lamp life in frequently switched applications, making this ballast useful for occupancy-controlled spaces, energy-management retrofits, classrooms, offices, and commercial buildings.

Technical Specifications

Key Features

• Bi-level step dimming ballast for energy-saving T8 fluorescent systems.
• Provides full output and reduced output operation: 100% / 30%.
• Program-start operation helps extend lamp life in frequently switched applications.
• Low 0.78 ballast factor helps reduce light output and energy use.
• Universal 120-277V input voltage.
• Designed for 2 or 1 F32T8 lamp operation.
• Anti-striation control helps reduce visible lamp spiraling with compatible T8 lamps.

Compatible Applications

• Commercial office buildings
• Schools and universities
• Healthcare facilities
• Retail stores and restaurants
• Energy-management retrofit projects
• Occupancy-controlled lighting areas
• Demand-response and step-dimming lighting systems
• Commercial T8 fixtures using F32T8 lamps

Before Ordering Verify

• Exact GE Model: Match GE 68968 / GE232-MVPS-L-S30 to the existing ballast label.
• Lamp Count: Confirm the fixture requires a 2 or 1 lamp F32T8 ballast.
• Dimming Requirement: Confirm the project requires 100% / 30% step dimming.
• Input Voltage: Confirm fixture supply voltage is 120-277V.
• Ballast Factor: Confirm the 0.78 low ballast factor matches the desired light output and energy-saving goal.
• Socket Type: Program-start and dimming systems require compatible rapid-start type sockets.
• Wiring Diagram: Follow the wiring diagram on the ballast label before installation.

Safety & Installation Guidelines

• Qualified Installation: Ballasts should be installed by qualified personnel following applicable electrical codes.
• Disconnect Power: Turn off and lock out power before servicing the fixture.
• Control Wiring: Verify step-dimming control wiring before energizing the system.
• Grounding: Properly ground the ballast and fixture to support safe operation and reduce interference.
• Use Compatible Lamps: Confirm lamp type, lamp count, ballast factor, and socket type before installation.

Wholesale & Project Support

ADL Supply supports contractors, facility managers, maintenance departments, ESCOs, and commercial buyers with GE ballast replacement identification, retrofit project quoting, and volume order support.

For volume pricing, availability, or help confirming the correct GE ballast, contact ADL Supply at 1-800-235-3489.