GE Current 43145 LED15T8/G/U6/850 Type C LED Tube T8 U-Bend U6 U-bend, 6 in. leg spacing 5000K 6-15W 2G13

Current / GE 43145 LED15T8/G/U6/850 – U-bend, 6 in. leg spacing T8 U-bend Type C LED Tube | 5000K | 6-15W Selectable | 2G13 Base | 50,000 Hour L70

The Current / GE 43145 LED15T8/G/U6/850 is a U-bend, 6 in. leg spacing T8 U-bend Type C LED glass tube with a 2G13 base, rated at 5000K daylight and 80 CRI. Output is set by the LumenChoice remote driver rather than by the tube, so a single tube covers 6-15W in field-selectable steps (6W = 750 lm, 9W = 1100 lm, 12W = 1550 lm, 15W = 1800 lm). Rated life is 50,000 hours to L70, and the tube carries a damp location rating for use in open or enclosed fixtures. A separate Type C remote driver is required — this tube will not operate on a fluorescent ballast or on line voltage.

Technical Specifications

Product Overview

Current's Type C LED tubes are positioned for retrofit and new-construction projects that need dimming and controllability rather than the simplest possible install. The 43145 sits in the LumenChoice line, where the lamp is deliberately not tied to a single wattage: the same tube runs at any of the driver-selectable levels, so a facility can stock fewer SKUs and tune light levels room by room after installation.

Type C is an external-driver LED tube architecture. The tube itself contains no internal driver; a dedicated remote LED driver converts line voltage to low-voltage Class 2 DC and feeds the lampholders directly. Existing fluorescent ballasts must be removed and the fixture rewired to the remote driver before these tubes will operate. This arrangement is what allows 0-10V dimming and field-tunable output across an entire installation from a small number of control devices.

This version is a U-bend, 6 in. leg spacing T8 U-bend glass tube on a 2G13 base at 5000K daylight, with a maximum overall length of 22.5 inches. At its highest setting it produces 1800 initial lumens, and at the driver default of 12W it produces 1550 lumens. Current rates the family for 50,000 hours to L70 and for ambient temperatures from -20°C to 45°C. All values are design or typical values measured under laboratory conditions.

Compatible Applications

• Offices, schools, and healthcare spaces where 0-10V dimming or daylight harvesting is required
• Fluorescent retrofits where the ballast is removed and the fixture is rewired to a remote driver
• Troffers, wraps, strips, and other fixtures accepting U-bend, 6 in. leg spacing T8 U-bend lamps on 2G13 lampholders
• Open or enclosed fixtures in dry or damp locations
• Facilities standardizing on fewer lamp SKUs by tuning output at the driver
• Retrofits targeting utility or DLC-based rebates, where the specific model is confirmed qualified

Before Ordering – Verify

• Confirm a Type C remote driver is included in the project scope. This tube has no internal driver and will not light on a fluorescent ballast or on line voltage.
• Confirm the existing ballast will be removed and the fixture rewired to the low-voltage DC output of the remote driver.
• Confirm the lampholder is 2G13 and that the fixture accepts a 22.5 in. maximum overall length.
• Confirm the wattage setting you need falls within the 6-15W range this tube supports, and that the chosen driver covers that same range.
• Confirm the driver's maximum tube count is not exceeded on each circuit.
• Confirm the color temperature. This tube is fixed at 5000K; SpectraChoice selectable-CCT versions are a different order code.
• Confirm the fixture location is dry or damp; this product is not rated for wet locations.
• If a rebate depends on DLC qualification, confirm the exact model on the DesignLights Consortium qualified products list before purchase.
• Carton quantity is 12, which is also the manufacturer minimum order quantity.

Safety and Handling Guidelines

• De-energize the circuit before removing the ballast or installing the remote driver.
• Ballast removal and driver wiring should be performed by a qualified electrician in accordance with the National Electrical Code and local codes.
• Confirm the fixture is clearly labeled after conversion so future service personnel do not attempt to install a ballast-driven lamp.
• These are glass tubes; handle carefully and avoid impact or twisting force on the end caps.
• Set the driver switch code before installation rather than adjusting under load.
• Do not operate the tube outside the -20°C to 45°C ambient temperature rating.
• Recycle or dispose of removed fluorescent lamps and ballasts according to local regulations.

Compliance

• cULus classified
• Damp location rated per UL 1993 environmental requirements for LED lamps
• Class 2 low-voltage DC output from the remote driver
• Not indicated as DLC qualified for this model on the manufacturer datasheet
• Rated life stated as 50,000 hours to 70% of initial lumen output (L70)
• 5-year limited warranty (50,000-hour products)
• Specifications per Current Lighting Solutions datasheet GEL193_R14; information and specifications subject to change without notice

Ordering Information

• Order code: 43145
• Description / product code: LED15T8/G/U6/850
• ADL Supply SKU: 43145-LED15T8/G/U6/850
• Carton quantity: 12 (minimum order quantity)
• Compatible remote drivers: LED/6-18/DR/D2L (2 tubes), LED/6-18/DR/D4L (4 tubes), and LED/DR/D4L/LW (4 tubes, 8-16.5W range)
• Drivers are sold separately and must be ordered with the tubes for a complete system
• Project and case quantities available

For wholesale pricing, bulk availability, or help confirming the correct replacement lamp, contact ADL Supply at 1-800-235-3489.