Product Overview

The GE ConstantColor® Precise™ TAL 30901 Lamp is a commercial-grade, low-voltage tungsten halogen reflector spotlight engineered for high-vibration retail displays, upscale gallery accenting, and demanding architectural tracks requiring maximum lamp retention. Delivering a tightly focused, punchy 10° narrow spot beam spread, this high-performance MR16 capsule yields an intensive 10,800 center beam candlepower (CBCP). Outfitted with a specialized GU7 twist-lock turn-and-key base and an integrated clear protective cover glass lens, it provides a 3,500-hour rated average service life while maintaining flawless color fidelity across its entire operational lifespan.
|
Wattage
50W
Precise Halogen
|
Input Voltage
12V
Transformer Req.
|
Beam Spread
10° NSP
10,800 CBCP
|
Base Type
GU7
Twist & Lock
|
ANSI Code
EXT/GU7
Certified Standard
|
ADL Supply Expert Application & Replacement Guide
The GE ConstantColor Precise TAL 30901 series lamp is a specialized property maintenance standard specified heavily across high-vibration retail malls, theatrical display tracks, luxury showcase framing, and commercial hospitality downlights. Outfitted with an innovative 10-degree narrow spot distribution, this module concentrates a high-density punch of light (10,800 CBCP) directly onto targeted perimeters, eliminating the loose side-scatter common in lower-grade miniature accent spots.
Critical GU7 Base Compatibility and Dichroic Heat Sink Tracking: Electrical contractors executing lighting sweeps must track two vital structural installation boundaries before checking out their cart. First, this lamp features a specialized GU7 twist-lock base mechanism. It is completely incompatible with standard push-in GX5.3 or GU5.3 bi-pin ceramic lampholders. The molded ceramic block utilizes dual turn-and-lock tabs that twist smoothly into dedicated GU7 sockets, providing absolute protection against lamp loosening caused by continuous thermal expansion cycles or ceiling vibration from building HVAC machinery.
Second, GE's ConstantColor Precise line incorporates a high-performance **dichroic (interference) glass reflector layer**. This multi-layer mirror filters infrared wavelengths, channeling approximately **66% of generated filament thermal energy backward through the rear of the bulb shell**, while casting only clean, cold visible light forward. This cooling process prevents early fading or drying on heat-sensitive inventory like fine clothing leathers, cosmetics, perfumes, and valuable gallery canvases. However, maintenance crews must ensure that track housings incorporate open backend venting slots so this backward-channeled heat can escape cleanly without roasting the internal socket connectors.
|
Verify Before Ordering
Specialty GU7 Twist-Lock Base (Not Bi-Pin) Check — California Shipping Restrictions Apply
This bulb operates on 12V low-voltage lines and requires a compatible magnetic or electronic step-down transformer rated for a 50W continuous load. It will NOT fit standard bi-pin GX5.3 sockets. This module incorporates an integrated clear protective front cover glass lens face, sealing the inner capsule and meeting building life safety metrics for unshielded track use.
State Delivery Restriction: Due to California Title 20 efficiency regulations, this tungsten halogen lamp cannot be legally sold or shipped to residential or commercial destinations inside California. |
Detailed Product Specifications
- Brand: GE Lighting (Current Lighting Solutions / ConstantColor® Precise™ TAL Line)
- Product Series Line: Low-Voltage Twist-Lock Dichroic Reflector MR16 Series
- GE Factory Product Order Code SKU: 30901
- Manufacturer Description Nomenclature: 50MR16/Q/10/TL
- Trade Industry ANSI Identification Code: EXT/GU7 Certified Interchangeable Standard
- UPC Barcode Number (GTIN-12): 043168309011 (Corrected from misprint 043168817708)
- Core Technology Class: Low-Voltage Miniature Tungsten-Halogen Reflector
- Operational Wattage: 50 Watts
- Nominal Input Voltage Requirement: 12 Volts AC/DC (Step-down transformer circuit required)
- Continuous Operating Amperage Draw: 4.17 Amperes
- Center Beam Luminous Intensity: 10,800 Candelas (cd)
- Total Luminous Output: 560 Lumens
- Beam Spread Profile: 10° Tight Precision Narrow Spot (NSP)
- Color Temperature Configuration: 3000K Warm White Halogen Balance
- Color Rendering Index (CRI): 100 Ra (Absolute Light Quality Representation)
- Reflector Envelope Construction: Multi-Layer ConstantColor® Dichroic Interference Glass
- Front Lens Treatment: Integrated Sealed Clear Protective Safety Glass Cover Lens
- Base Type Configuration: GU7 Turn-and-Lock Twist Sleeve Base
- Maximum Overall Length (MOL): 2.17" Inches Extended Depth (55.0mm actual depth from base to lens apex)
- Bulb Nominal Diameter (DIA): 2.00" Inches Nominal MR16 (50.8mm actual reflector face width)
- Rated Average Lifespan: 3,500 Hours (Constant Regulated Voltage)
- Chassis Burn Position Limit: Universal — Operates reliably in any mounting angle
- Spectral Protection: Integrated UV-Control Internal Capsule Filtering Block
Operation, Safety & Mounting Compliance
Low-Voltage Transformer and Dimming Controls
This 50-watt capsule operates strictly on low-voltage 12V lines driven by high-quality electronic or magnetic core-and-coil step-down transformers. Check your transformer nameplate under load to confirm total available wattage parameters safely accommodate the 50W continuous load draw. This module is 100% dimmable to low light levels—to prevent filament buzzing or flicker loops across the system, ensure that your wall dimmers are specifically certified for low-voltage lighting control (electronic low-voltage ELV or magnetic low-voltage MLV tracking, matching your transformer's internal circuit framework).
Handling Rules and Casing Maintenance
Never handle the outer glass casing or base plate with bare hands during installation loops. Human fingers automatically deposit microscopic alkaline body oils that fuse chemically to the quartz lens during rapid heating cycles. This containment creates localized hot spots, prompting envelope clouding, micro-fracturing, and accelerated pressure breakdown. Installers must execute re-lamping sweeps using clean cotton tech gloves, a microfiber lint-free wipe, or its protective cardboard wrapper sleeve. Meticulously wipe the bulb with isopropyl alcohol if skin tracking occurs. Let the track head cool down for 15 minutes before servicing components to prevent contact skin burns.
Commercial Equipment Industry Cross-References
This 12V GU7 turn-and-lock lamp replaces or acts as an equivalent drop-in for the following models:
- Sylvania Twist-Lock Cross: 50MR16/T/10/TL / Specialty Retention Series Match
- Philips Lighting Alternative: 50W 12V MR16 Twist-Lock Spot Line
- Ushio Reference: 50W MR16 GU7 Twist-Lock Turn & Key
Bulk Commercial Lighting Supply & Project Support
ADL Supply handles volume distribution shipments, multi-pack logistics, and contractor project quotes for procurement teams, schools, and warehouse facilities nationwide.
For specialized contractor pricing tiers, job-site pallet deliveries, or comprehensive submittal documentation, contact our support team directly at 1-800-235-3489. We are your commercial supply partners as an authorized wholesale Lighting Distributor In Doral, Florida.