GE 45059 LU200/ECO/NC

Product Overview

GE 45059 LU200/ECO/NC — 200W Non-Cycling HPS Lamp, E39 Base

The GE 45059 LU200/ECO/NC is a 200-watt Ecolux® NC non-cycling HPS lamp with a ED18 bulb and E39 Mogul Screw base, designed for HPS ballast circuits rated ANSI S66. It delivers 22,000 initial lumens at 2100K and is rated for 30,000 hours.

WATTAGE

200W

HPS / HID

LUMENS

22,000 lm

Mean: 19,800 lm

CCT

2100K

Warm Amber

BASE

E39

Mogul Screw

RATED LIFE

30,000 hrs

Average Life

Technical Specifications

GE Order Code	45059
GE Model / Description	LU200/ECO/NC
Lamp Type	High Pressure Sodium (HPS) — Lucalox
Bulb Shape	ED18
Base Type	E39 Mogul Screw
Burning Position	U — Universal (any burning position)
Fixture Enclosure Rating	O — Open or enclosed fixture (per GE datasheet)
Maximum Overall Length (MOL)	9.75"
Light Center Length (LCL)	5.75"
Wattage	200W
ANSI Ballast Type	S66
Case Quantity	20
Rated Life	30,000 hours
Initial Lumens	22,000 lm
Mean Lumens	19,800 lm
Color Temperature	2100K
CRI	22
Lamp Finish / Additional Info	Clear, Non-Cycling
UPC / EAN	43168450591
Mercury Content	Contains mercury — dispose per local regulations.

Product Overview

The GE LU200/ECO/NC is a 200-watt Ecolux® NC non-cycling HPS lamp. It ships with a ED18 bulb envelope on a E39 Mogul Screw base and is built to operate on an HPS ballast rated ANSI S66. Output is 22,000 initial lumens (19,800 mean lumens) at 2100K and 22 CRI, with a warm amber HPS color.

The Ecolux® NC non-cycling feature makes locating and replacing end-of-life lamps quick and easy. These lamps are low-mercury, pass TCLP, use a lead-free base.

Not recommended for: retail displays, color-critical inspection environments, or any application requiring CRI above 22.

Compatible Applications

Typical uses (per GE): Industrial, roadway, and security lighting.
Fixtures wired for an HPS ballast rated ANSI S66 with a E39 Mogul Screw socket.
Direct replacement for existing 200W HPS lamps with the same base and ballast rating. Verify ballast compatibility before ordering.
Burning position: U (Universal — any burning position).

Before Ordering — Verify

ANSI / Ballast Code: Confirm the existing lamp or ballast label matches S66.
Wattage: Confirm the fixture is rated for 200W.
Base Type: Confirm the socket matches E39 Mogul Screw.
Ballast Compatibility: This lamp requires an HPS-rated ballast and ignitor. It will not operate on a metal halide or mercury vapor ballast.
Burn Position: HPS lamps are not position-sensitive — no orientation restriction.
Physical Fit: Confirm lamp shape (ED18), length (9.75" MOL), and clearance against the existing lamp or fixture manual.
Confirm order code 45059 (GE LU200/ECO/NC) exactly matches the lamp or ballast label on your existing fixture before purchasing a replacement.
Case pack quantity is 20; confirm this meets your order needs.

Safety and Handling Guidelines

Correct Ballast Required: Use only with an HPS-compatible ballast and ignitor rated for this lamp. An incompatible ballast can cause lamp failure or fixture damage.
Vacuum Jacket: This is a vacuum jacket lamp and may implode if broken. Wear safety glasses and gloves when installing or removing the lamp, and allow it to cool fully first.
Sodium Content: The lamp contains sodium — avoid skin contact with broken pieces (chemical burn risk).
Warm-Up / Restrike: Per GE, HPS lamps take about 3–4 minutes to reach 90% light output after starting, and about 1 minute after a brief power interruption.
Approved Fixtures Only: Install only in fixtures rated for the listed lamp type, wattage, and operating position; do not use if the outer glass is scratched or broken.
Mercury Content: Contains mercury. Do not dispose of in regular trash; recycle through an approved lamp recycling program in accordance with federal, state, and local regulations.

Compliance

Ecolux® lamps use a lead-free base and pass TCLP per the GE catalog, which can lower disposal costs.
Contains mercury — subject to applicable lamp recycling and disposal regulations. California, Washington, and other states may have mandatory take-back or handling fee requirements.
Verify additional certifications (UL, Title 20, Prop 65) with the GE specification sheet prior to use in regulated installations.