GE 45059 LU200/ECO/NC – 200W | 2100K Warm Amber | CRI ~22 | ANSI S66/O | Non-Cycling (NC) | E39 Mogul Screw

The GE 45059 LU200/ECO/NC is a 200W 2100K Warm Amber High Pressure Sodium (HPS) lamp in the GE Lighting Lucalox series, ANSI S66/O, E39 Mogul Screw, 22,000 initial lumens, 24,000 hours rated life, Non-Cycling (NC) variant, ED18 bulb. Requires a compatible HPS ballast — do not use on metal halide or mercury vapor ballasts. Contains mercury — dispose per local regulations. UPC: 43168450591. MPN: GE-45059-LU200ECONC.

Wattage

200W

HPS

Color Temp

2100K

CRI ~22

ANSI Code

S66/O

Ballast Code

Rated Life

24,000

Hours

Base

E39

Mogul

Quick Specs

Brand: GE Lighting
Series: GE Lucalox
GE Order Code: 45059
Manufacturer Part Number: GE-45059-LU200ECONC
UPC: 43168450591
ANSI Code: S66/O
Lamp Type: High Pressure Sodium (HPS) — Lucalox
Wattage: 200W
Color Temperature: 2100K Warm Amber
CRI: ~22
Initial Lumens: 22,000 lm
Rated Average Life: 24,000 hours
Base Type: E39 Mogul Screw
Bulb Shape: ED18
Burn / Operating Position: Universal
Variant: Non-Cycling (NC)
Mercury Content: Contains mercury — dispose per local regulations.

Product Overview

The GE 45059 LU200/ECO/NC is a 200W 2100K Warm Amber GE Lucalox High Pressure Sodium lamp. Non-Cycling (NC) lamps self-extinguish at end of rated life rather than cycling on and off as voltage rises. This protects the ballast and signals relamping time, reducing fixture wear and simplifying maintenance scheduling.

HPS ballast required. This lamp must be operated on a compatible High Pressure Sodium ballast matched to ANSI code S66/O. HPS lamps are not interchangeable with metal halide or mercury vapor ballasts. Contains mercury — dispose per local regulations.

Applications

Outdoor area and street lighting – Roadways, parking lots, municipal streetlights, and perimeter security lighting.
Industrial and commercial high-bay – Warehouses, manufacturing facilities, and large indoor/outdoor commercial fixtures.
Retrofit and maintenance replacement – Verify ANSI code and wattage before ordering. HPS lamps require an HPS-rated ballast.

Safety and Installation

HPS ballast required. Operate only on a High Pressure Sodium ballast rated for ANSI S66/O. Do not use on MH or mercury vapor ballasts.
Non-Cycling design: At end of life this lamp self-extinguishes rather than cycling on/off, protecting the ballast. Replace promptly when the lamp fails to start.
Allow warm-up time: 3–5 minutes for full output.
Hot restrike: Allow 10–20 minutes after switching off before restarting.
UV radiation: Use only in fixtures with UV-protective shielding. Do not operate with a broken or cracked outer envelope.
Mercury disposal: Contains mercury — dispose per local lamp recycling regulations.