GE 14672 LU70/ECO/NC – 70W | 1900K Warm Amber | CRI ~22 | ANSI S62/O | Non-Cycling (NC) | E39 Mogul Screw

The GE 14672 LU70/ECO/NC is a 70W 1900K Warm Amber High Pressure Sodium (HPS) lamp in the GE Lighting Lucalox series, ANSI S62/O, E39 Mogul Screw, 6,300 initial lumens, 24,000 hours rated life, Non-Cycling (NC) variant, ED23.5 bulb. Requires a compatible HPS ballast — do not use on metal halide or mercury vapor ballasts. Contains mercury — dispose per local regulations. UPC: 43168146722. MPN: 14672-LU70-ECO-NC.

Wattage

70W

HPS

Color Temp

1900K

CRI ~22

ANSI Code

S62/O

Ballast Code

Rated Life

24,000

Hours

Base

E39

Mogul

Quick Specs

Brand: GE Lighting
Series: GE Lucalox
GE Order Code: 14672
Manufacturer Part Number: 14672-LU70-ECO-NC
UPC: 43168146722
ANSI Code: S62/O
Lamp Type: High Pressure Sodium (HPS) — Lucalox
Wattage: 70W
Color Temperature: 1900K Warm Amber
CRI: ~22
Initial Lumens: 6,300 lm
Rated Average Life: 24,000 hours
Base Type: E39 Mogul Screw
Bulb Shape: ED23.5
Burn / Operating Position: Universal
Variant: Non-Cycling (NC)
Mercury Content: Contains mercury — dispose per local regulations.

Product Overview

The GE 14672 LU70/ECO/NC is a 70W 1900K Warm Amber GE Lucalox High Pressure Sodium lamp. Non-Cycling (NC) lamps self-extinguish at end of rated life rather than cycling on and off as voltage rises. This protects the ballast and signals relamping time, reducing fixture wear and simplifying maintenance scheduling.

HPS ballast required. This lamp must be operated on a compatible High Pressure Sodium ballast matched to ANSI code S62/O. HPS lamps are not interchangeable with metal halide or mercury vapor ballasts. Contains mercury — dispose per local regulations.

Applications

Outdoor area and street lighting – Roadways, parking lots, municipal streetlights, and perimeter security lighting.
Industrial and commercial high-bay – Warehouses, manufacturing facilities, and large indoor/outdoor commercial fixtures.
Retrofit and maintenance replacement – Verify ANSI code and wattage before ordering. HPS lamps require an HPS-rated ballast.

Safety and Installation

HPS ballast required. Operate only on a High Pressure Sodium ballast rated for ANSI S62/O. Do not use on MH or mercury vapor ballasts.
Non-Cycling design: At end of life this lamp self-extinguishes rather than cycling on/off, protecting the ballast. Replace promptly when the lamp fails to start.
Allow warm-up time: 3–5 minutes for full output.
Hot restrike: Allow 10–20 minutes after switching off before restarting.
UV radiation: Use only in fixtures with UV-protective shielding. Do not operate with a broken or cracked outer envelope.
Mercury disposal: Contains mercury — dispose per local lamp recycling regulations.