LED/LC/ED23.5P/7SC 93314601 — GE Passive Selectable LED HID Lamp

GE LED/LC/ED23.5P/7SC 93314601 — Passive Selectable LED HID Replacement Lamp, ED23.5, EX39 Mogul, LumenChoice + SpectraChoice, Ballast Bypass Type B

The GE LED/LC/ED23.5P/7SC (Order Code 93314601) is a Passive Selectable LED HID replacement lamp from GE/Current Lighting Solutions, featuring built-in LumenChoice® and SpectraChoice™ switches that let the installer select wattage and color temperature without tools. This ED23.5 corn-cob lamp is a Type B ballast-bypass retrofit offering three selectable wattage levels — 32W, 39W, or 46W (default) — with corresponding lumen output of 5,000, 6,300, or 7,500 lumens, and three selectable color temperatures of 3000K, 4000K, or 5000K (default). With an EX39 mogul base, CRI greater than 70, and a rated life of 50,000 hours, this lamp uses passive cooling (no fan) with electronic thermal management. cULus certified, Damp location rated. The existing fixture must be rewired to bypass the ballast. Sold 3 per carton. Verify ballast bypass wiring and voltage range before ordering.

Technical Specifications

Product Overview

The GE LED/LC/ED23.5P/7SC is part of Current's Passive Selectable LED HID lineup, designed as a cost-effective Type B ballast-bypass retrofit for less demanding HID applications while maintaining the same ANSI length and diameter as the HID lamp it replaces. Built-in LumenChoice® and SpectraChoice™ switches let the installer select between three wattage levels (32W, 39W, or 46W) and three color temperatures (3000K, 4000K, or 5000K) directly on the lamp, with no separate tools or accessories required — a single SKU can effectively cover the application range of several fixed-output lamps, simplifying inventory and project specification.

Unlike GE's Active Cooling Selectable lamps, this lamp uses passive cooling with electronic thermal management instead of a fan, resulting in a lower selectable wattage range (32–46W versus 50–80W for the active-cooled ED23.5 equivalent) suited to lighter-duty 70–175W HPS/MH replacement applications. The lamp features omnidirectional light output similar in distribution to traditional HID lamps, allowing it to work with existing fixture reflector optics. An in-line fuse, tether kit, and support kit are included standard. Dimming via external controls is not supported — the integrated switch is used only to set wattage and color temperature at time of installation, not for ongoing dimming.

Compatible Applications

• Lighter-duty HID retrofit projects — Direct ballast-bypass replacement for 70W–175W HPS or MH fixtures, selectable to match the application.
• Area, wall pack, and general-purpose fixtures — Where flexible wattage/CCT selection simplifies project specification and reduces SKU count.
• Commercial and light industrial facilities — Seeking inventory simplification across multiple lower-wattage HID applications with a single selectable lamp.

Before Ordering — Verify

• Ballast Bypass Required: The existing fixture must be rewired to bypass the ballast entirely — this is a Type B lamp, not a plug-and-play ballast-compatible retrofit.
• Input Voltage: Confirm your circuit falls within 120–277V.
• Existing HID Wattage: Confirm the application falls within the 70W–175W HPS/MH replacement range covered by this lamp's selectable settings.
• Wattage/CCT Selection: Confirm the desired wattage (32W/39W/46W) and color temperature (3000K/4000K/5000K) setting before final installation; lamp ships set to the default 46W / 5000K configuration.
• Dimming: Do not use with phase-cut (Triac) dimmers. The integrated switch sets wattage/CCT only and is not a dimming control.
• Physical Fit: Confirm 7.8" MOL and 3.7" diameter fit within your fixture housing, with a minimum compartment volume of 367 in³ (approximately 9" x 6" x 7").
• DLC Status: Verify current DLC QPL qualification at designlights.org/search if required for a utility rebate program.
• Carton Quantity: Minimum order quantity is 3 units (1 carton).

Safety and Installation Guidelines

• Disconnect power before installing or servicing.
• Qualified Electrician Required: Ballast bypass wiring should be performed by a qualified electrician familiar with rewiring HID fixtures for Type B LED lamp operation.
• In-Line Fuse: Install the included in-line fuse per manufacturer instructions to protect against incorrect wiring.
• Tether and Support Kit: Install the included tether and support kit per manufacturer instructions.
• Switch Setting: Set the integrated wattage and color temperature switches to the desired configuration prior to final fixture closure.
• Dimmer Compatibility: Do not connect to phase-cut dimmers.
• Damp Location Use: Confirm fixture rating matches installation environment.

Compliance

• cULus listed. DLC ID S-NDF684 — verify current qualification at qpl.designlights.org/solid-state-lighting.
• RoHS compliant — contains no lead or mercury. No mercury-related shipping restrictions apply.
• Covered by U.S. Patent 10508776 (and potentially other pending applications).
• 5-year limited warranty.

Ordering Information

• Brand: GE / Current Lighting Solutions
• GE Order Code / SKU: 93314601
• Manufacturer Part Number: LED/LC/ED23.5P/7SC
• UPC: 662049525557
• Selectable Wattage / CCT: 32W/39W/46W — 3000K/4000K/5000K
• Base: EX39 Mogul (ED23.5)
• Replaces: 70W–175W HPS / Metal Halide (depending on setting)
• Packaging: 3 per carton.
• Case quantities and bulk pricing: Contact ADL Supply for volume orders.

For wholesale pricing, bulk availability, or help confirming the correct replacement lamp, contact ADL Supply at 1-800-235-3489.