Halco SAL-150-T4-50-U LED Flood Light – 150W | 5000K Daylight | 21, 935 lumens | 120-277V | Type 2

The Halco SAL-150-T4-50-U is a 150W led flood light delivering 21, 935 lumens, 5000K Daylight, CRI 70 (CRI), 120-277V input, and 100,000 hours rated life.

Quick Specs

• Brand: Halco
• Series / Family Name: SekTor
• Item Number / P/N: 100063
• Order Code: SAL-150-T4-50-U
• UPC: Verify with manufacturer specification sheet
• Lamp Type / Bulb Type: LED Flood Light
• Wattage: 150W
• Voltage: 120-277V
• Color Temperature: 5000K Daylight
• CRI: 70 (CRI)
• Initial Lumens: 21, 935 lumens
• Rated Average Life: 100,000 hours
• Distribution Type: Type 2
• Dimmable: Yes
• Equivalent Wattage: 400W
• Input Frequency: 50/60Hz
• Power Factor: 0.9
• Finish: Textured Bronze
• Weight: 14.92
• Warranty: 5
• Applications: Commercial Flood & Area Lighting
• Certifications: DLC 5.1 Premium, UL Listed, Rohs Compliant, UL Listed, RoHS

Product Overview

The Halco SAL-150-T4-50-U is built for commercial flood & area lighting where reliable lumen output, broad voltage compatibility, and long service life are important. This integrated LED fixture is suited to site, area, perimeter, roadway, parking, or security lighting depending on mounting configuration and optical distribution.

5000K daylight delivers a crisp, high-contrast appearance commonly used in parking lots, perimeter lighting, and security applications. Verify distribution pattern, mounting style, finish, and environmental rating before ordering. This fixture supports dimming and controls compatibility should be confirmed with the project controls package.

Cross-Reference — Direct Replacement For

No manufacturer cross-reference table was provided in the source data. Verify equivalency with manufacturer specification sheet.

Replacement Ballasts for Integrated LED Fixtures

Not applicable for integrated LED fixtures. Verify driver or service-part requirements with manufacturer specification sheet before ordering.

Applications

• Parking areas and site lighting – Suitable for outdoor commercial spaces requiring broad, dependable illumination.
• Perimeter and security lighting – Supports visibility around building exteriors, service yards, and access roads.
• Commercial and industrial facilities – Appropriate for warehouses, campuses, and general exterior circulation zones.
• Distribution-specific layouts – Confirm Type 2 optics for the intended pole spacing and light pattern.
• Retrofit and maintenance replacement – Replace existing fixtures only after confirming wattage, input voltage, mounting, optical distribution, and environmental rating.

Replacing Your Current Fixture?

• Wattage – Confirm the project lighting design and branch circuit are appropriate for 150W.
• Voltage – Confirm the supply voltage matches 120-277V.
• Light distribution – Confirm the required optic matches Type 2 for roadway, parking lot, or area coverage.
• Color temperature – Confirm 5000K is appropriate for the site appearance and visibility needs.
• Controls compatibility – Confirm dimming and control requirements before ordering.
• Mounting and fit – Confirm pole, arm, wall, or tenon compatibility and verify fixture dimensions.
• Environment – Confirm wet-location or ingress-protection requirements for the installation area.

Ordering Information

• Brand: Halco
• Item Number / P/N: 100063
• UPC: Verify with manufacturer specification sheet
• Wattage / CCT: 150W / 5000K
• Voltage: 120-277V
• Distribution: Type 2
• Packaging: Sold individually unless otherwise noted.
• Also available in: Verify alternate wattages, distributions, finishes, or CCT options with manufacturer specification sheet.
• Case quantities and bulk pricing: Contact ADL Supply for volume orders.

Safety and Handling Guidelines

• Disconnect power before installation or service. Verify branch circuit voltage and fixture wiring before energizing.
• Install only in suitable outdoor applications. Confirm wet-location, IP, and ambient temperature requirements for the site.
• Do not disassemble internal LED or driver components. Service only according to manufacturer instructions.
• Allow the fixture to cool before handling. Use qualified personnel for mounting and electrical connection.

Compliance

• Verify RoHS compliance status with manufacturer specification sheet.
• Verify California Title 20 / Prop 65 requirements with manufacturer specification sheet.
• DLC 5.1 Premium
• UL Listed
• Rohs Compliant
• UL Listed
• RoHS
• ADL Supply recommends confirming all compliance data with the official manufacturer product data sheet prior to specification or installation.