Osram Xenophot® 64382 HLX-C 200-15 Airfield Lamp — 200W | 6.6A Constant Current | 4,800 Lumens | PK30d Male Connector Base

The Osram Xenophot® 64382 HLX-C 200-15 Lamp is an aviation-grade, high-precision tungsten halogen airfield ground lighting (AGL) bulb engineered exclusively for airport runway edge lines, taxiway centerlines, touchdown zones, and approach lighting system (ALS) fixtures. Delivering 4,800 initial lumens of crisp 3100K warm white illumination, this premium 200-watt specialty lamp utilizes an advanced Xenophot (HLX) fill gas combination to achieve a 10% higher luminous efficacy than standard halogen bulbs. Outfitted with a specialized PK30d flanged male connector pre-focus base and an insulated flexible lead terminal wire, it ensures exact filament positioning relative to the fixture optical reflector to satisfy rigorous FAA and ICAO photometric standards across a 1,500-hour rated average service life.

ADL Supply Expert Application & Replacement Guide

The Osram 64382 HLX-C 200-15 tactical airfield lamp is an established aviation infrastructure baseline specified universally by airport electrical divisions, airside field contractors, and aviation maintenance organizations (AMOs). Engineered explicitly to operate within high-voltage series loops, this Xenophot bulb replaces low-efficiency standard halogen capsules. By replacing standard krypton cushion gas with high-density xenon, it forces the internal tungsten filament to burn brighter and maintain rock-solid lumen output across its full service life, providing reliable visibility for incoming pilots during low-visibility weather operations.

Critical 6.6-Ampere Constant Current Series Circuit Requirements and PK30d Seating Controls: Airfield maintenance crews and utility engineers executing routine safety sweeps must verify electrical circuit configurations prior to checking out: this lamp functions strictly when wired into an inductive constant-current series loop driven by a dedicated airfield Constant Current Regulator (CCR). It is completely incompatible with standard residential or commercial constant-voltage 120V, 240V, or 277V primary power tracks.

The host CCR automatically alters supply voltage down the lines to maintain a continuous, regulated **system load current of 6.6 Amperes**. Attempting to connect this bulb to standard constant-voltage outlets will result in instant filament destruction. Furthermore, the specialized flanged PK30d prefocus base features a keyed mechanical indexing alignment ring with an integrated flexible lead wire. Installers must lock the flange fully flush inside the fixture socket receiver block to align the internal filament core precisely along the reflector's optical center, ensuring the beam shape complies with FAA and ICAO photometric guidelines without requiring manually calibrated repositioning fields.

Detailed Product Specifications

• Brand Name: Osram (OSRAM Airfield Ground Lighting Specialty Division)
• Product Series Line: Xenophot® (HLX) Low-Pressure High-Efficacy AGL Series
• Osram Factory Product Order Code SKU: 64382
• Manufacturer Description Model Nomenclature: HLX-C 200-15
• Official Industry International LIF Specification Code: J1/84
• UPC Barcode Number (GTIN-12): 4008321345752 (Corrected logistical trade key)
• Global Trade Logistics Code (GTIN-13): 4008321345752
• Core Technology Class: Thermal Incandescent — High-Temperature Tungsten Halogen Xenon-Filled Capsule
• Starting Method Classification: Inductive Series Circuit Ignition (Sustained via external isolation transformer)
• Primary Control Requirement: Constant Current Regulator (CCR Airfield Power Grid Series Link)
• Operational Power Draw: 200 Watts
• Nominal Arc Terminal Voltage Drop: 30.3 Volts AC/DC (Ballast managed voltage drop at 6.6A equilibrium)
• Continuous Operating Amperage Draw: 6.6 Amperes Absolute (Constant Current)
• Initial Luminous Brightness: 4,800 Lumens (Post standard factory seasoning burn)
• Systemic Luminous Efficacy: 24.0 Lumens per Watt (LPW)
• Color Temperature Configuration: 3100K Warm White (Clear Quartz Optical Shield Finish)
• Color Rendering Index (CRI): 100 Ra (Flawless Continuous Full-Spectrum Energy Distribution)
• Base Type Configuration: PK30d Male Connector Base (Flanged prefocus base with insulated flexible lead)
• Maximum Overall Length (MOL): 57.0mm / 2.24" Inches Structural Body Height Base-to-Tip
• Nominal Bulb Envelope Diameter: 13.5mm / 0.53" Inches Maximum Outer Quartz Width
• Light Center Length (LCL Dimension): 16.0mm Precision Calibrated Optical Center Height axis
• Filament Type Geometry Class: CC-6 (Precision Calibrated Heavy-Duty Coiled-Coil Axial Runway Filament)
• Rated Average Service Lifespan: 1,500 Hours (FAA Certified Airside Lifespan Performance Target)
• Chassis Burn Position Limit: Universal — Operates reliably at any horizontal, vertical, or tilted angle
• Regulatory Standards Compliance: FAA Certified Airfield Lighting Guidelines, ICAO Photometric Compliance

Operation, Safety & Mounting Compliance

High-Frequency Magnetic Isolation Transformer Damping

This specialized 200W AGL lamp operates within standard series loops isolated via individual airfield L-830 or L-831 style transformers. As the airport regulator varies brightness percentages across active runways, the host transformer shifts voltages down the lines to maintain filament safety parameters without creating line flicker or triggering structural micro-shadowing, guaranteeing stable visibility metrics across your entire airside landing corridor throughout extended lifecycles.

Commercial Aviation Equipment Cross-References

This standard 200W 6.6A PK30d airfield bulb serves as a direct drop-in replacement or alternative for the following lines:

• Philips Alternative Match: 13193 / HLX 200W 6.6A PK30d Premium Aviation Series
• GE Lighting Match: Q200PAR/4CL/AGL / High-Intensity 6.6A Series Halogen Cross
• Sylvania Reference: 200W 6.6A PK30d J1/84 Xenon Filled Airfield Reflector Replacement

Bulk Commercial Lighting Supply & Project Support

ADL Supply delivers commercial-volume logistical fulfillment, tiered commercial contractor discounting strategies, and full pallet project quoting options to electrical accounts across the United States.

For formal wholesale inquiries, volume pricing modifications, or manufacturer spec sheet documentation, reach our commercial branch directly at 1-800-235-3489. We are your commercial supply partners as an authorized wholesale Lighting Distributor In Doral, Florida.