Philips 140400 CDM20/TM/830 PGJ5 #207517 Mastercolor

Philips 140400 MasterColor CDM-TM 20W/830 T3.5 Ceramic Metal Halide Lamp – 3000K | 1650 Lumens | CRI 87 | PGJ5

The Philips 140400 MasterColor CDM-TM 20W/830 T3.5 CL 1CT is a compact 20-watt ceramic metal-halide lamp designed for compatible miniature architectural and retail luminaires. It produces 1,650 initial lumens at a nominal 3000K warm-white color temperature with a nominal CRI of 87. The lamp uses a PGJ5 base, has a clear T3.5 envelope, and operates in a universal burn position. It must be paired with compatible electronic control gear specifically approved for this Philips CDM-TM lamp. Please verify the complete product number, lamp designation, base, ballast compatibility, voltage, dimensions, and luminaire temperature limits before ordering.

Technical Specifications

Key Features & Benefits

• Ultra-compact ceramic metal-halide lamp for compatible miniature luminaires.
• Produces 1,650 initial lumens from a nominal 20-watt lamp.
• 3000K warm-white light with nominal CRI 87.
• PGJ5 base and compact T3.5 clear envelope.
• Universal operating position.
• Rated average life of 12,000 hours.
• Designed for use with compatible Philips e-Vision electronic control gear.
• A+ energy-efficiency classification.

Product Overview

The Philips MasterColor CDM-TM 20W/830 is a miniature ceramic metal-halide lamp designed for compact architectural and retail fixtures. Philips developed the lamp as part of a system with matching e-Vision electronic control gear, allowing small fixture designs while maintaining concentrated high-intensity light output.

The lamp provides 1,650 initial lumens at 3000K with a nominal CRI of 87. Its compact 52 mm maximum length and 11.2 mm diameter make it suitable for compatible low-profile luminaires where standard ceramic metal-halide lamps are physically too large.

This lamp must be operated with compatible electronic control gear approved for the exact CDM-TM 20W lamp. Similar lamp wattage, shape, or base dimensions do not establish electrical compatibility.

Compatible Applications

• Retail display fixtures designed for Philips CDM-TM 20W lamps
• Compact architectural accent lighting
• Miniature spotlights and directional luminaires
• Hospitality and commercial display lighting
• Maintenance replacement where Philips product number 140400 is specified

Before Ordering – Verify

• Product number: Confirm Philips product number 140400.
• Full product name: Verify MasterColor CDM-TM 20W/830 T3.5 CL 1CT.
• Color: The 830 designation identifies 3000K warm white with nominal CRI 87.
• Base: Confirm the luminaire uses a PGJ5 lamp holder.
• Control gear: Use only with compatible electronic control gear approved for this Philips 20W CDM-TM lamp.
• Electrical ratings: Confirm compatibility with a lamp operating at approximately 100V and 0.220A.
• System power: Philips lists 24W system power with the applicable electronic control gear.
• Dimming: This lamp is not dimmable.
• Dimensions: Verify a maximum overall length of 52 mm and maximum diameter of 11.2 mm.
• Operating position: Philips specifies universal operation, but all fixture instructions must still be followed.
• Warm-up and restrike: Allow up to three minutes for 90% output and up to 15 minutes for re-ignition.
• Temperature limits: Maintain the cap-base and bulb temperatures within the published Philips limits.
• ANSI code: ANSI C175/E is not identified in the supplied Philips datasheet and should not be used as the primary compatibility reference.
• Packaging: Philips lists one lamp per SKU and 12 lamps per case.

Safety and Installation Guidelines

• Disconnect and lock out electrical power before inspecting, installing, or removing the lamp.
• Allow the lamp and luminaire to cool completely before handling.
• Use only with compatible electronic control gear and a PGJ5 lamp holder.
• Do not connect the lamp directly to line voltage.
• Do not use the lamp if the outer envelope is cracked, scratched, punctured, or otherwise damaged.
• A damaged outer envelope can permit hazardous short-wave ultraviolet radiation that may cause serious skin burns or eye inflammation.
• Use appropriate shielding and follow the luminaire manufacturer’s safety requirements.
• Maintain the published maximum cap-base and bulb temperatures.
• Keep combustible materials away from the hot lamp and luminaire.
• Installation and servicing should be performed by qualified personnel.

Compliance & Environmental Information

• Complies with FDA radiation-performance requirements under 21 CFR 1040.30.
• Canadian radiation standard referenced by Philips: SOR/DORS/80-381.
• Energy-efficiency classification: A+.
• Mercury content: 2.4 mg.
• Recycle or dispose of the lamp according to applicable mercury-lamp regulations.
• No ANSI C175/E, UL, ETL, RoHS, DLC, ENERGY STAR, Title 20, Title 24, or JA8 claim was identified in the supplied Philips datasheet.

Ordering Information

• Brand: Philips Lighting
• Product Number: 140400
• Full Product Name: MasterColor CDM-TM 20W/830 T3.5 CL 1CT
• Short Product Name: CDM20/TM/830 12PK
• Wattage: 20W nominal
• Color Temperature: 3000K
• CRI: 87 nominal
• Initial Lumens: 1,650
• Base: PGJ5
• Rated Average Life: 12,000 hours
• Quantity per SKU: 1 lamp
• Case Quantity: 12 lamps
• UPC / EAN: 046677140403
• Case GTIN: 50046677140408

For wholesale pricing, bulk availability, or help confirming the correct electronic ballast and luminaire compatibility, contact ADL Supply at 1-800-235-3489.