Product Overview
Philips 45206-0 10.5T8/36-3500 IF 10/1 10.5W 36" T8 LED 3500K Neutral White InstantFit Lamp
The Philips 45206-0 (10.5T8/36-3500 IF 10/1) is a 10.5W 36" T8 LED InstantFit lamp, model 9290011184, rated for 3500K neutral white light at 82 CRI (min). It operates on 120-277V or 347V depending on ballast, ships with 1,160 nominal lumens at normal ballast factor, and carries a 50,000-hour average rated life. This lamp contains no mercury, emits virtually no UV or IR, and is NSF certified for use in food areas and refrigerated food displays.
Wattage 10.5W Bare Lamp |
Color Temp 3500K Neutral White |
Lumens 1,160 Normal BF (0.88) |
Mercury Free NSF Certified |
Rated Life 50,000 Hours |
Technical Specifications
| Product Number | 45206-0 |
| Model Number | 9290011184 |
| Ordering Code | 10.5T8/36-3500 IF 10/1 |
| Product Line | Philips LED InstantFit T8 - 3' |
| Voltage | 120-277V, 347V (depending on ballast) |
| Base | G13 Bi-Pin |
| Bare Lamp Watts | 10.5W |
| CRI (min) | 82 |
| Color Temperature | 3500K (Neutral White) |
| MOL (Maximum Overall Length) | 36" |
| Beam Angle | 160° |
| Average Rated Life | 50,000 hours (B50 L70, tested at ballast factor ≤ 0.88) |
| DLC Listing | Not DLC listed |
| System Watts by Ballast Factor | Low (0.78): 12.5W · Normal (0.88): 13W · High (1.18): 17W |
| System Lumens by Ballast Factor | Low (0.78): 1,050 lm · Normal (0.88): 1,160 lm · High (1.18): 1,400 lm |
| Standard Package Quantity | 10 per case |
| Case Weight / Cube | 5.1 lbs / 0.43 cu. ft. |
| Pallet Quantity | 800 |
| SKU / Case / Pallet Dimensions | SKU: 1.1 x 1.1 x 36.0" · Case: 38.0 x 6.0 x 3.4" · Pallet: 50.6 x 39.4 x 39.6" |
| Mercury Content | Mercury-free (LED lamp) |
Product Overview
This Philips InstantFit lamp is built for a straightforward upgrade from fluorescent to LED: it fits into existing linear fixtures and eliminates the need for rewiring, so the fixture retains its original UL and CSA compliance. It's compatible with a wide range of instant-start and programmed-start ballasts; select models like this one also support dimming ballasts where noted. Full light output is maintained down to -4°F (-20°C), and the lamp is rated for use up to 113°F (45°C) ambient – well suited to spaces with frequent on/off switching or cold environments like refrigerated display cases.
Compared to a (2) lamp F32T8 electronic instant-start system at 0.88 ballast factor (58 system watts), a comparable (2) lamp Philips InstantFit 12W setup runs at approximately 29 system watts – about 50% energy savings. This lamp carries a 5-year limited warranty; see philips.com/warranties for full terms and conditions.
Compatible Applications
- Direct retrofit into existing T8 linear fixtures using compatible instant-start or programmed-start ballasts
- Cold-environment applications down to -4°F (-20°C), including refrigerated food display cases (NSF certified)
- Applications with frequent on/off switching cycles
- Facilities that require mercury-free lighting for non-hazardous waste disposal
Before Ordering – Verify
- Confirm your existing ballast is compatible – refer to the Philips InstantFit ballast compatibility guide at philips.com/instantfit before ordering, as this lamp will only operate properly on compatible instant-start and programmed-start ballasts
- Confirm lamp length (36") and wattage (10.5W) match your fixture
- Confirm supply voltage (120-277V or 347V) matches your installation
- This specific SKU is not DLC listed – if utility rebate documentation is required, verify DLC status before ordering
Safety and Handling Guidelines
- Turn off power to the fixture before relamping
- Verify ballast compatibility before installation – installing on an incompatible ballast can cause the lamp to fail to strike or perform erratically
- Follow the Philips Quick Installation Guide included with lamp shipment
- Mercury-free construction allows for non-hazardous waste disposal
Compliance
- Mercury-free LED lamp – complies with FCC Part 18
- Not DLC listed
- CSA, RoHS Compliant, NSF Certified, cULus Listed
Ordering Information
- Product Number: 45206-0
- Model Number: 9290011184
- Ordering Code: 10.5T8/36-3500 IF 10/1
- Manufacturer Part Number: 10.5T8/36-3500 IF 10/1
- UPC: 046677452063
- Standard Package Quantity: 10 per case
For wholesale pricing, bulk availability, or help confirming ballast compatibility, contact ADL Supply at 1-800-235-3489.
