Product Overview
Philips 928102805112 TUV 260W XPT DIM UNP/20
The Philips 928102805112 TUV 260W XPT DIM UNP/20 is a TUV Amalgam XPT Power Consumption UV-C lamp from Philips, engineered for professional water treatment systems. Featuring special amalgam technology and a protective internal coating, it delivers stable UV-C disinfection output across a wide temperature range for municipal, industrial, and process water applications.
|
Watts
260W
|
Cap-Base
G5.4x17q
|
Current
3.055 A
|
Diameter
32 mm
|
Key Product Details
- Philips Order Code: 928102805112
- SKU: 928102805112
- Type: TUV Amalgam XPT Power Consumption
- Variant: Dimmable
- Power Consumption: 260W
- Lamp Current: 3.055 A
- Cap-Base: G5.4x17q
- Lamp Shape: Twin-tube amalgam Glass Type: UV-C transparent Product Overview Philips Dynapower system consists of an electronic DynaPower driver that operates one or two TUV Amalgam 230W, 260W and 335W XPT lamps. This system is extremely reliable and robust. The driver allows for immediate energy savings compared to similar drivers on the market. Moreover, it can be dimmed down to 60% power level for additional energy savings. Further energy savings are realized by the TUV Amalgam XPT lamps, because they can be dimmed down to reach the same UV output as similar lamps on the market. Benefits Extreme reliability of driver; with annual failure rate of less than 1% Easier to maintain compliance with regulations thanks to reduced risk of failures Easier maintenance thanks to single lamp operation, allowing to detect easily which lamps need to be replaced Dimmable up to 60% power level for additional energy savings Best environmental choice thanks to maximum lifetime reliability, in combination with minimum substances, packaging and product weight Features Operates 230W, 260W and 335W TUV Amalgam XPT lamps Single lamp operation possible Cooler operating temperature for additional energy savings 100% stress testing minimizing 0-hour failures Protection against voltage peaks Permanent overvoltage protection Approximately 20 seconds start-up time (compared with 90 seconds for similar drivers on the market) Applications Municipal drinking water treatment equipment Municipal waste water treatment equipment Process water treatment equipment Warnings and Safety A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner. DANGER: Risk Group 3 Ultra Violet product. These lamps emit high-power UV radiation that can cause severe injury to skin and eyes. Avoid eye and skin exposure to unshielded product. Use only in an enclosed environment which shields users from the radiation. Plants and/or materials that are exposed to UV-C and/or ozone for a long time may become damaged and/or discolored. Compliance RoHS Compliant Manufactured to ISO standards
- Glass Type: UV-C transparent Product Overview Philips Dynapower system consists of an electronic DynaPower driver that operates one or two TUV Amalgam 230W, 260W and 335W XPT lamps. This system is extremely reliable and robust. The driver allows for immediate energy savings compared to similar drivers on the market. Moreover, it can be dimmed down to 60% power level for additional energy savings. Further energy savings are realized by the TUV Amalgam XPT lamps, because they can be dimmed down to reach the same UV output as similar lamps on the market. Benefits Extreme reliability of driver; with annual failure rate of less than 1% Easier to maintain compliance with regulations thanks to reduced risk of failures Easier maintenance thanks to single lamp operation, allowing to detect easily which lamps need to be replaced Dimmable up to 60% power level for additional energy savings Best environmental choice thanks to maximum lifetime reliability, in combination with minimum substances, packaging and product weight Features Operates 230W, 260W and 335W TUV Amalgam XPT lamps Single lamp operation possible Cooler operating temperature for additional energy savings 100% stress testing minimizing 0-hour failures Protection against voltage peaks Permanent overvoltage protection Approximately 20 seconds start-up time (compared with 90 seconds for similar drivers on the market) Applications Municipal drinking water treatment equipment Municipal waste water treatment equipment Process water treatment equipment Warnings and Safety A lamp breaking is extremely unlikely to have any impact on your health. If a lamp breaks, ventilate the room for 30 minutes and remove the parts, preferably with gloves. Put them in a sealed plastic bag and take it to your local waste facilities for recycling. Do not use a vacuum cleaner. DANGER: Risk Group 3 Ultra Violet product. These lamps emit high-power UV radiation that can cause severe injury to skin and eyes. Avoid eye and skin exposure to unshielded product. Use only in an enclosed environment which shields users from the radiation. Plants and/or materials that are exposed to UV-C and/or ozone for a long time may become damaged and/or discolored. Compliance RoHS Compliant Manufactured to ISO standards
- Diameter: 32 mm
- Overall Length (O): 1400 mm
- C Max: 1514 mm
- Operating Position: P10 Dimmable: Yes Diameter: 32 mm O Length: 1,400 mm C (max): 1,514 mm
- Dimmable: Yes
- Pack Quantity: 20/pack
- RoHS Compliant: Yes
- Annual Driver Failure Rate: <1%
- Glass: UV-C transparent
Applications & Safety Notes
- Municipal drinking water treatment equipment
- Municipal waste water treatment equipment
- Industrial and process water treatment
- Swimming pool and recreational water disinfection
- UV-C disinfection systems requiring temperature-independent output
- Safety: Risk Group 3 UV product — use only in enclosed systems shielding users from radiation
- Dispose according to local regulations for mercury-containing lamps
Search Tip: Search by Philips order code 928102805112 or SKU 928102805112.
