Philips Advance IOP-3PSP32-SC 3-Lamp 32W T8 Optanium Ballast

Product Overview

Philips Advance IOP-3PSP32-SC — Optanium Programmed Start Electronic Ballast, 3-Lamp 32W T8, 120-277V

The Philips Advance IOP-3PSP32-SC is a Optanium electronic fluorescent ballast that operates up to 3 32W T8 lamps using the programmed start method. Input is IntelliVolt® 120V to 277V, 50/60 Hz. Electrical performance values for this catalog number are published in the manufacturer ballast catalog and should be confirmed against the current Philips Advance data sheet. The ballast is high power factor and sound rated A. It operates F32T8, FBO31T8, and F32T8/U6 lamps. Confirm lamp type, lamp count, starting method, ballast factor, and supply voltage against the fixture before ordering.

Lamps

Up to 3

Lamp Type

32W T8

Input Voltage

120-277V

Starting Method

Programmed Start

Ballast Factor

—

Technical Specifications

Brand	Philips Advance
Catalog Number	IOP-3PSP32-SC
Ballast Family	Optanium
Product Type	Electronic fluorescent ballast
Maximum Number of Lamps	3
Lamp Compatibility	F32T8, FBO31T8, F32T8/U6 (32W)
Lamp Starting Method	Programmed Start
Input Voltage	IntelliVolt® 120V to 277V, 50/60 Hz
Power Factor	High power factor
Sound Rating	A
Compliance	RoHS compliant; UL and CSA listed; Energy Efficient

Catalog Number Breakdown

Input voltage	I — IntelliVolt® 120V to 277V, 50/60 Hz
Family	OP — Optanium
Maximum number of lamps	3
Wiring configuration	PSP — programmed start parallel
Primary lamp watts	32W
Can description / option	SC — small can

Advance electronic ballast catalog numbers encode the input voltage, ballast family, maximum lamp count, wiring configuration, primary lamp wattage, case description, and connector option in sequence. Reading the number tells you most of what you need before checking the data table.

Product Overview

Programmed start ballasts preheat the lamp cathodes to the correct temperature before applying striking voltage. That preheat sequence dramatically reduces the cathode wear that occurs at each start, so lamp life holds up under frequent switching. This is the correct choice for fixtures on occupancy or vacancy sensors, in restrooms, corridors, stairwells, and any space that cycles often. Input power is marginally higher than an equivalent instant start ballast, and that is the trade being made.

Optanium is the Advance high-efficiency line, engineered to reduce input power and system losses against comparable ballasts while holding lamp performance. Within the range, LW (low watt) variants reduce ballast factor and input power together, and HL (high light output) variants raise both.

IntelliVolt® input means one catalog number covers every supply voltage in the 120-277V range. For a distributor or a facility running mixed 120V and 277V service, that reduces the number of ballasts that have to be stocked to cover a building.

Related catalog numbers in the same family and voltage class: IOP-1P32-LW-N, IOPA-1P32-LW-N, IOP-1P32-N, IOPA-1P32-N, IOP-1P32-HL-N, IOPA-1P32-HL-N, IOP-2P32-LW-N, IOPA-2P32-LW-N, IOP-2P32-N, IOPA-2P32-N. These differ in lamp count, starting method, ballast factor, or case style and are not interchangeable without checking the specification.

Compatible Applications

F32T8, FBO31T8, and F32T8/U6 (32W) lamp fixtures
Fluorescent troffers, strip fixtures, and wraparounds
Ballast replacement and fluorescent fixture maintenance
Commercial offices, retail, and institutional buildings
New construction and retrofit
Fixtures on occupancy or vacancy sensors, and frequently switched spaces
Multi-building portfolios on mixed supply voltages within the 120-277V range
U-bend F32T8/U6 lamp fixtures in 2x2 troffers

Before Ordering — Verify

Confirm the lamps are F32T8, FBO31T8, or F32T8/U6 32W lamps. This ballast will not operate T12 or T5 lamps.
Confirm lamp count. This ballast operates up to 3 lamps. Operating fewer lamps than rated changes input power and ballast factor — check the manufacturer table for the configuration you are using.
Confirm the starting method. Programmed Start is not interchangeable with the other methods. Instant start gives the lowest input power but shortens lamp life under frequent switching; programmed start protects lamp life on sensor-controlled fixtures.
Confirm supply voltage is within IntelliVolt® 120V to 277V, 50/60 Hz.
Confirm electrical performance values — input power, ballast factor, line current, and minimum starting temperature — against the current Philips Advance data sheet for this catalog number before specifying.
Confirm lead length and connector requirements for the fixture. Lead lengths and shipping data are published separately by the manufacturer.

Safety and Installation Guidelines

Disconnect power at the breaker before removing the old ballast or making any connections.
Installation should be performed by a qualified electrician in accordance with the National Electrical Code and local requirements.
Ground the ballast case.
Follow the wiring diagram supplied with the ballast for the lamp count being installed. Wiring differs between 1-lamp, 2-lamp, and 3-lamp configurations.
Cap and insulate any unused leads when operating fewer lamps than the ballast is rated for.
Do not exceed the rated input voltage range.
Verify all lamps in a fixture are the same type and wattage. Mixing lamp types on one ballast can cause premature failure.
Allow the ballast and fixture to cool before handling after operation.
Verify all connections before restoring power.
Fluorescent lamps contain mercury. Handle and dispose of lamps in accordance with federal, state, and local requirements.