Product Overview
![]()
Philip 27W El/MdT 4K 120V (147884) Medium Base Energy Saver Replaces 100W Incandescent
It's a 27-watt spiral compact fluorescent lamp with a medium screw base for standard 120V sockets. It produces about 1,850 lumens at 4100K (Philips color code 840) with a color rendering index (CRI) of 82 and a rated average life of 8,000 hours. It is part of the Philips Energy Saver Twister line, which lets you cut energy use and operating costs without giving up light quality.
|
Power
27W
CFL Screw-In
|
Brightness
1,930 lm
Initial lumens
|
Color Temp
4000K
Cool White | CRI 82
|
Base
Medium
Screw Base
|
Rated Life
12,000 h
Average rated
|
Application & Replacement Guide
This lamp has its ballast built into the base, so it screws straight into a matching medium-base socket with no separate ballast or starter. It is designed for standard 120V operation and fits into incandescent fixtures, which makes it an easy way to upgrade lamps that burn more power for less light.
Features & Benefits
- Instant On: Turns on instantly.
- Fits Incandescent Fixtures: Screws into standard medium-base sockets.
- Long Life: Rated at 8,000 hours, far longer than a standard incandescent bulb.
- Energy Saver: A 27W lamp delivering about 1,930 lumens.
Good fits include table and floor lamps, wall sconces, reading lamps, and open hanging pendants.
Detailed Product Specifications
- Brand: Philips Lighting
- Product Name: Mini Dec Twister 27W Med EL/mDT 1CT
- Product Number: 147884
- Ordering Code: EL/MDT 27W 1850LM
- Lamp Type: Self-ballasted compact fluorescent, screw base
- Lamp Wattage: 27W
- Rated Voltage: 120V
- Color Code: 840 (4000K)
- Color Temperature: 4100K
- Color Rendering Index (CRI): 82
- Initial Lumens: 1,930 lm
- Rated Average Life: 8,000 hours (3-hour start)
- Base: Medium (single contact medium screw)
- Bulb: EL/mDT
- Max Overall Length (MOL): 5.71 in (145 mm)
- Pack Type: 1 lamp in a folding carton
- Case Quantity: 6 per case
- Pack UPC: 046677147884
- Case Bar Code: 50046677147889
Ballast & Fixture Compatibility
This is a self-ballasted lamp: the electronics are inside the base, and no ballast or starter is needed. Screw it into a medium-base socket on a 120V supply. Keep these points in mind:
- Dimmers: Do not use with dimmers unless the lamp is marked dimmable.
- Timers and Photocells: Check that the device is compatible with compact fluorescent lamps before use. An incompatible device can cause premature lamp failure.
- Recessed or Enclosed Fixtures: Use in recessed cans or enclosed indoor fixtures can shorten lamp life.
- Outdoor Use: Requires a weather-protected fixture.
- Emergency Exit Lighting: Do not use in emergency exit fixtures or lights.
Before You Order – Verify
- Confirm your supply is 120V and the socket is a medium screw base.
- Confirm the lamp fits the fixture: the maximum overall length is 5.71 in (145 mm).
- Confirm 4000K cool white matches the lamps already installed before partial re-lamping.
- Confirm the fixture is open or ventilated for best lamp life, and that it is not on a dimmer.
Bulk Commercial Lighting Supply & Project Support
ADL Supply delivers commercial-volume fulfillment, tiered contractor pricing, and full pallet project quoting to electrical accounts across the United States.
For wholesale inquiries, volume pricing, or manufacturer spec sheet documentation, call our commercial branch at 1-800-235-3489.