Philips TLD-K 30W/03 Blacklight

Philips TL-D 30W/03 SLV 30W Super Actinic T8 Fluorescent Lamp | 420 nm Peak | G13 | 98V | 13,000 Hours

The Philips TL-D 30W/03 is a 30W Super Actinic linear fluorescent lamp designed for specialized reprographic, marine-aquarium, and compatible phototherapy equipment. Its internally coated T26 envelope converts short-wave ultraviolet energy into useful actinic radiation across approximately 380–480 nm, with maximum output near 420 nm. The lamp operates at a nominal 98V and 0.36A through compatible fluorescent control gear and uses a G13 medium bi-pin base. This is a specialty actinic lamp and is not a 3000K warm-white general-lighting lamp. Please verify product code, spectral output, lamp dimensions, ballast compatibility, and equipment approval before ordering.

Technical Specifications

Key Features & Benefits

• Special white fluorescent coating converts short-wave ultraviolet radiation into useful actinic output.
• Emits across approximately 380–480 nm with peak radiation near 420 nm.
• Spectral distribution is designed to match the sensitivity of certain diazo copying materials.
• Suitable for compatible marine-aquarium systems where blue actinic radiation is required.
• Can be combined with full-spectrum natural-daylight lamps in properly designed marine-aquarium installations.
• G13 medium bi-pin configuration for compatible fluorescent fixtures and control gear.

Product Overview

The Philips TL-D 30W/03 SLV is a specialty Super Actinic fluorescent lamp rather than a conventional white general-lighting tube. Its internal fluorescent coating transforms short-wave ultraviolet energy into a blue-violet actinic spectrum concentrated between approximately 380 and 480 nm.

The lamp reaches maximum spectral output near 420 nm. Philips identifies reprography as its principal application because the spectral distribution corresponds with the sensitivity of certain diazo copying papers. The manufacturer also lists marine-aquarium and specialized phototherapy equipment among its applications.

For marine aquaria, Philips notes that TL-D/03 Aqua Coral lamps can be combined with suitable full-spectrum natural-daylight fluorescent lamps to enhance the visual appearance of corals and aquatic displays. Lamp selection, quantity, exposure duration, ballast operation, and fixture suitability should follow the equipment or aquarium-system manufacturer’s requirements.

Compatible Applications

• Diazo copying and reprographic equipment designed for TL-D/03 lamps
• Marine-aquarium lighting systems requiring approximately 420 nm actinic output
• Aquarium installations combining actinic and full-spectrum daylight lamps
• Specialized phototherapy equipment specifically approved for TL-D 30W/03 lamps
• Professional equipment using 30W G13 actinic fluorescent tubes

Before Ordering – Verify

• Product identification: Confirm the required lamp is Philips TL-D 30W/03 SLV, not TL-D 30W/830 or another general-lighting color.
• Order code: Verify Philips order code 625021 10 and full product code 871150062502110.
• Spectral requirement: This lamp emits approximately 380–480 nm radiation with peak output near 420 nm.
• Application: Confirm the equipment manufacturer specifies a TL-D/03 Super Actinic lamp or approves it as a direct replacement.
• Base: Verify that the fixture uses G13 medium bi-pin lamp holders.
• Electrical requirements: Confirm compatible fluorescent control gear for a 30W lamp operating at approximately 98V and 0.36A.
• Not general lighting: This product is not intended to replace 3000K, 3500K, 4000K, or other white fluorescent lamps.
• Aquarium systems: Confirm that the spectral output, lamp quantity, photoperiod, and fixture configuration are appropriate for the livestock and aquarium system.
• Phototherapy: Use only in professionally designed equipment and according to the equipment manufacturer’s operating instructions and qualified clinical supervision.
• Rated-life distinction: The datasheet lists 13,000 hours to 50% failures with electromagnetic gear and a separate 3,000-hour useful-life value; replacement intervals should follow the equipment’s required actinic-output performance.

Safety and Handling Guidelines

• Disconnect electrical power before inspecting, installing, or removing the lamp.
• Install only in equipment with compatible G13 sockets and fluorescent control gear rated for this lamp.
• Do not connect the lamp directly to line voltage.
• This is a specialty actinic radiation source; avoid unnecessary direct viewing or prolonged exposure at close range.
• Use only within fixtures and equipment designed for the intended reprographic, aquarium, or approved specialty application.
• Handle the glass tube carefully and do not use a lamp that is cracked, chipped, or otherwise damaged.
• Insert the pins evenly and rotate the lamp only as required by the fixture socket design.
• Follow the equipment manufacturer’s installation, exposure, shielding, ventilation, and replacement instructions.
• Medical or phototherapy use must be limited to equipment specifically designed and approved for this lamp and operated under appropriate professional supervision.

Compliance & Environmental Information

• Low-pressure mercury-vapor fluorescent specialty lamp.
• Contains mercury and should be recycled or disposed of according to applicable local, state, and federal regulations.
• Published UV-A output at 100 hours: 0.27W under the manufacturer’s IEC measurement method.
• Published UV-B to UV-A ratio: 0.6% under the manufacturer’s IEC measurement method.
• No UL, ETL, DLC, Title 20, Title 24, JA8, RoHS, or general medical-device certification was identified in the provided Philips datasheet.

Ordering Information

• Brand: Philips Lighting
• Full Product Name: TL-D 30W/03 36in
• Order Product Name: TL-D 30W/03 36IN
• Wattage: 30W
• Color Designation: Super Actinic / 03
• Peak Output: Approximately 420 nm
• Base: G13 medium bi-pin
• Pack Quantity: 1 lamp per sleeve
• Outer Carton Quantity: 6 lamps

For wholesale pricing, bulk availability, or help confirming the correct replacement lamp, contact ADL Supply at 1-800-235-3489.