Satco S21341 2.8T6/LED/CL/940/120V/E12

Satco S21341 2.8W T6 LED Filament – 200 lm | 4000K Cool White | Clear | E12 Candelabra | Replaces 25W Incandescent

The Satco S21341 is a 2.8W LED T6 tubular filament lamp with an E12 candelabra base, delivering 200 lumens at 4000K (Cool White) with a 90+ CRI and a wide 300° beam angle. It is a direct LED replacement for a 25W incandescent T6, operates on 120V, and is dimmable on standard 120V phase-cut (Triac) dimmers. The clear glass finish and slim T6 profile are suited for decorative, vanity, and appliance fixture applications. Please verify specifications below before ordering.

Technical Specifications

Product Overview

The Satco S21341 is an LED T6 filament lamp engineered to replace 25W incandescent T6 tubulars while drawing only 2.8W. The clear glass envelope and classic filament appearance make it a natural fit for decorative fixtures, vanity bars, candelabra pendants, and appliance lighting where the lamp is visible and aesthetics matter alongside efficiency.

At 4000K (Cool White) with a 90+ CRI, this lamp renders colors accurately and produces a crisp, neutral light output suitable for task-oriented and display settings. The 300° omnidirectional beam pattern ensures the same broad light spread as the incandescent lamp it replaces, with no dark spots or directional bias.

The S21341 is wet location rated and approved for enclosed fixtures (excluding vapor-tight types), and is dimmable on 120V phase-cut dimmers. It carries a 2-year warranty and is listed under California Title 20 as lawful for sale.

Compatible Applications

• Vanity and bathroom lighting
• Decorative candelabra and pendant fixtures
• Appliance and refrigerator lighting
• Accent and display lighting
• Covered outdoor fixtures (wet location rated)
• Enclosed fixture applications (excluding vapor-tight enclosures)

Before Ordering – Verify

• Confirm the fixture uses an E12 candelabra base — not E11, E14, or E26
• Confirm 120V supply voltage; this lamp is not rated for 12V or 277V applications
• If dimming is required, confirm the dimmer is a standard 120V phase-cut (Triac) type compatible with LED loads; not all dimmers listed as “LED compatible” will work with low-wattage filament lamps
• Confirm T6 lamp shape and 3.2″ MOL fit the fixture socket depth and any globe or chimney
• Note that this is a 4000K (Cool White) lamp; if a warmer color temperature is required, confirm whether Satco offers sibling SKUs in 2700K or 3000K in the T6 filament E12 family before ordering
• Not for use in fully enclosed vapor-tight fixtures

Safety and Handling Guidelines

• Disconnect power before installing or removing the lamp
• Although rated for wet locations, do not install in submerged or direct-spray environments — verify the fixture itself is wet location listed
• Do not install in vapor-tight fixtures
• Handle by the base when installing; avoid touching the glass envelope with bare hands
• Allow the lamp to cool before handling if recently in use
• Dispose of in accordance with local electronics recycling regulations; this lamp contains no mercury

Compliance

• cULus Listed
• FCC Compliant
• RoHS Compliant
• Wet Location Rated
• California Title 20 compliant; lawful for sale in California
• Not DLC qualified
• Not Title 24 / JA8 compliant
• Mercury-free (no state shipping restrictions)

Ordering Information

• Item Number: S21341
• Order Code: 2.8T6/LED/CL/940/120V/E12
• UPC: 045923206481
• Packaging: 24 per master case / 6 per inner pack
• Warranty: 2 years

For wholesale pricing, bulk availability, or help confirming the correct replacement lamp, contact ADL Supply at 1-800-235-3489.