Product Overview

Ushio 1000453 EYH/FKT JCD120V-250WB – 250W | 120V | ANSI EYH/FKT | Type: —

The Ushio 1000453 EYH/FKT JCD120V-250WB is a 250W 120V Halogen JC Single-Ended — Photo-Optic/SSTV lamp, ANSI EYH/FKT, Type: — base, 150 hours rated life. Designed for professional audio/visual projection, studio, stage, and photo-optic equipment.

Wattage

250W

Halogen

Voltage

120V

Operating

Color Temp

6050K

CCT

Lumens

—

Initial lm

Rated Life

150

Hours

Quick Specs

Brand: Ushio
Ushio Catalog Number: 1000453
ANSI Code: EYH/FKT
Lamp Type: Halogen JC Single-Ended — Photo-Optic/SSTV
Color Temperature: 6050K Daylight
Bulb Type: Halogen
Wattage: 250W
Operating Voltage: 120V
Rated Average Life: 150 hours
Base Type: G5.3 2-Pin Bipin
Filament: Type: Color
Burn / Operating Position: Base Down

Product Overview

The Ushio 1000453 EYH/FKT JCD120V-250WB is a 250W 120V Halogen halogen lamp for professional audio/visual projection, studio, stage, and photo-optic equipment. this lamp provides high-intensity output appropriate for professional projection, studio, and stage applications at 120V. Rated life: 150 hours.

Do not touch the quartz envelope with bare hands. Skin oils cause hot spots. Use only in approved enclosed fixtures. Allow 15 minutes cool-down before handling. Verify voltage before installing.

Applications

Professional audio/visual projection – JC halogen for projectors, stage spotlights, and studio fixtures specifying 250W at 120V.
Stage, studio, and photo-optic applications – High-intensity tungsten halogen source at for camera-balanced studio and stage production.
Retrofit and maintenance replacement – Confirm ANSI code, wattage, voltage, and base type before ordering.

Safety and Handling

Do not touch the lamp envelope with bare hands. Skin oils cause hot spots leading to premature failure or lamp burst. Use clean gloves or lint-free cloth. Clean with isopropyl alcohol if accidentally touched.
Voltage — 120V: Verify your fixture or power supply output matches the rated voltage. Operating above rated voltage significantly shortens lamp life.
Enclosed fixture only: Use only in approved enclosed optical fixtures. Exposure to lamp during operation is a UV/thermal hazard.
Allow 15-minute cool-down before replacement.