Sylvania 40331 LED17TT5/DL/FG/830/BF

Sylvania 40331 LED17TT5DLFG830BF — LEDlescent™ DULUX® L TT5 Ballast-Free LED Lamp, 17W, 2100 Lumens, 3000K, 120-277V

The Sylvania LED17TT5/DL/FG/830/BF (item number 40331) is a 17W LEDlescent™ DULUX® L LED TT5 ballast-free lamp with a 2G11 four-pin base, designed as an energy-saving replacement for fluorescent FT40DL/25W and FT40DL/28W lamps. It operates directly on 120-277V with no ballast required — the existing ballast is bypassed. The lamp produces 2100 lumens at 3000K and 83 CRI, with a rated life of 50,000 hours to L70 and a 5-year limited warranty (24/7 operation). It is double-ended and wired end to end, works with shunted and non-shunted sockets, and is non-dimmable. Because the fixture must be rewired for line voltage, confirm the wiring plan, socket condition, and lamp type before ordering.

Technical Specifications

Product Overview

LEDlescent DULUX L LED TT5 ballast-free lamps are a lightweight, energy-saving alternative to traditional fluorescent TT5 lamps. They bypass the existing ballast and operate directly on 120-277V, which minimizes labor and recycling costs and lowers maintenance, and they provide instant light and uniform light distribution with an optimized glass optical design intended to mimic the traditional fluorescent TT5 lamp.

The lamp is double ended and wired end to end, which prevents a non-passive failure if a fluorescent lamp is later installed in the rewired fixture by mistake. It works with shunted and non-shunted sockets, so no socket change is needed.

Because the lamp is UL Classified as a luminaire conversion retrofit kit under UL 1598C, the UL rating of the existing fixture is not voided when the fixture is electrically modified, provided the installer follows the installation instructions supplied with the lamps. The lamp is instant-on with no warm-up time and stable lamp-to-lamp color, and can be used with occupancy sensors for energy savings.

This order code is factory-set to 3000K at 2100 initial lumens (17W). Other color temperatures in the same 17W family are LED17TT5/DL/FG/835/BF (3500K, item 40332, 2100 lm), LED17TT5/DL/FG/841/BF (4100K, item 40333, 2200 lm).

Compatible Applications

• General illumination
• Hospitality
• Office
• Retail spaces
• Replacement of FT40DL/25W and FT40DL/28W fluorescent lamps where the ballast is being removed
• Spaces using occupancy sensors
• Dry and damp locations; open and enclosed fixtures

Before Ordering — Verify

• Confirm the fixture will be rewired for line voltage with the ballast bypassed. This is a ballast-free lamp and does not operate on a fluorescent ballast.
• Confirm the existing lamp is an FT40DL/25W or FT40DL/28W (2G11 four-pin) type.
• Do not use this lamp with external LED drivers or ballasts, with dimmers, or for emergency lighting.
• Confirm socket condition. Shunted and non-shunted sockets are both acceptable; tie socket leads together for non-shunted sockets as instructed in the installation guide.
• Confirm supply voltage is within 120-277V.
• Color temperature — this item is 3000K. Siblings in the same family: LED17TT5/DL/FG/835/BF (3500K, item 40332, 2100 lm), LED17TT5/DL/FG/841/BF (4100K, item 40333, 2200 lm).
• Confirm ambient conditions stay within -4°F to 113°F (-20°C to 45°C) and the case stays below 149°F (65°C).
• Confirm package quantity — this item is supplied 10 per package.
• Where a utility rebate is involved, confirm current DLC® status for this item at qpl.designlights.org. The datasheet lists DLC 5.0.

Safety and Handling Guidelines

• Turn off power at the breaker before installing, inspecting, or maintaining lamps. Ballast-bypass rewiring places line voltage at the sockets.
• Install and operate in compliance with the National Electrical Code, Underwriters Laboratories requirements, and all applicable local codes.
• Read and comply with all instructions before attempting inspection, service or installation.
• Do not expose wiring to sheet metal edges or other sharp objects. Do not make or alter open holes in an enclosure housing wiring or electrical components during kit installation.
• Handle by the lamp body and base, avoid impact, and do not install a lamp with visible damage.
• Operate only in dry or damp locations. The lamp must not come into direct contact with water.
• Ensure the fixture allows the case to remain below its 149°F (65°C) maximum temperature.
• This lamp contains no mercury and no lead. Recycle or dispose of it in accordance with local requirements.

Compliance

• UL Classified as a luminaire conversion retrofit kit under UL 1598C, so the existing fixture's UL rating is not voided when it is electrically modified, provided the supplied instructions are followed.
• DLC 5.0. Confirm current qualification at qpl.designlights.org.
• FCC Title 47 CFR Part 15 Subpart B Class B.
• RoHS compliant.
• Lead free and mercury free.
• NSF listed (per the datasheet).
• 5-year limited lamp warranty based on 24/7 operation; NLB Trusted Warranty Program.

Ordering Information

• Item Number: 40331
• Ordering Abbreviation: LED17TT5/DL/FG/830/BF
• UPC: 046135403316
• Brand: Sylvania (LEDVANCE)
• Lamp: 17W DULUX L TT5, 2G11 four-pin, 2100 lm, 3000K, 83 CRI
• Voltage: 120-277V, ballast bypass
• Rated Life: 50,000 hours (L70)
• Dimming: Non-dimmable
• Package Quantity: 10

For wholesale pricing, bulk availability, or help confirming the correct replacement lamp, contact ADL Supply at 1-800-235-3489.