Sylvania AREADTD1A/020UNV840/NC/GR LED Area Light – 20 W | 4000K (Neutral White) Cool White | 4800 lm | 120–277V | Type V

The Sylvania AREADTD1A/020UNV840/NC/GR is a 20 W led area light delivering 4800 lm, 4000K (Neutral White) Cool White, CRI 80+, 120–277V input, and 135,000 hours rated life. UPC: Code: 046135602382.

Quick Specs

• Brand: Sylvania
• Series / Family Name: Dusk to Dawn
• Item Number / P/N: 60238
• Order Code: AREADTD1A/020UNV840/NC/GR
• UPC: Code: 046135602382
• Lamp Type / Bulb Type: LED Area Light
• Wattage: 20 W
• Voltage: 120–277V
• Color Temperature: 4000K (Neutral White) Cool White
• CRI: 80+
• Initial Lumens: 4800 lm
• Rated Average Life: 135,000 hours
• Distribution Type: Type V
• Dimmable: Verify with manufacturer specification sheet
• Equivalent Wattage: Verify with manufacturer specification sheet
• Power Factor: ≥ 0.90
• Efficacy: 120 lm/W
• Mounting: Instructions
• Lens: UV-stabilized polycarbonate
• Finish: Gray Powder-Coated
• Dimensions: 11.4" x 7.6" x 6.9"
• Weight: 2.8 lbs / 1.3 kg
• Warranty: Verify with manufacturer specification sheet
• Applications: Commercial outdoor lighting
• Certifications: cULus, FCC, CSA, RoHS

Product Overview

The Sylvania AREADTD1A/020UNV840/NC/GR is built for commercial outdoor lighting where reliable lumen output, broad voltage compatibility, and long service life are important. This integrated LED fixture is suited to site, area, perimeter, roadway, parking, or security lighting depending on mounting configuration and optical distribution.

4000K cool white is a standard commercial outdoor color temperature that supports visibility without looking overly blue. Verify distribution pattern, mounting style, finish, and environmental rating before ordering. This model is not specified as dimmable in the source data; verify controls requirements before installation.

Cross-Reference — Direct Replacement For

No manufacturer cross-reference table was provided in the source data. Verify equivalency with manufacturer specification sheet.

Replacement Ballasts for Integrated LED Fixtures

Not applicable for integrated LED fixtures. Verify driver or service-part requirements with manufacturer specification sheet before ordering.

Applications

• Parking areas and site lighting – Suitable for outdoor commercial spaces requiring broad, dependable illumination.
• Perimeter and security lighting – Supports visibility around building exteriors, service yards, and access roads.
• Commercial and industrial facilities – Appropriate for warehouses, campuses, and general exterior circulation zones.
• Distribution-specific layouts – Confirm Type V optics for the intended pole spacing and light pattern.
• Retrofit and maintenance replacement – Replace existing fixtures only after confirming wattage, input voltage, mounting, optical distribution, and environmental rating.

Replacing Your Current Fixture?

• Wattage – Confirm the project lighting design and branch circuit are appropriate for 20 W.
• Voltage – Confirm the supply voltage matches 120–277V.
• Light distribution – Confirm the required optic matches Type V for roadway, parking lot, or area coverage.
• Color temperature – Confirm 4000K (Neutral White) is appropriate for the site appearance and visibility needs.
• Controls compatibility – This model is not specified as dimmable; verify controls requirements before ordering.
• Mounting and fit – Confirm pole, arm, wall, or tenon compatibility and verify fixture dimensions.
• Environment – Confirm wet-location or ingress-protection requirements for the installation area.

Ordering Information

• Brand: Sylvania
• Item Number / P/N: 60238
• UPC: Code: 046135602382
• Wattage / CCT: 20 W / 4000K (Neutral White)
• Voltage: 120–277V
• Distribution: Type V
• Packaging: Sold individually unless otherwise noted.
• Also available in: Verify alternate wattages, distributions, finishes, or CCT options with manufacturer specification sheet.
• Case quantities and bulk pricing: Contact ADL Supply for volume orders.

Safety and Handling Guidelines

• Disconnect power before installation or service. Verify branch circuit voltage and fixture wiring before energizing.
• Install only in suitable outdoor applications. Confirm wet-location, IP, and ambient temperature requirements for the site.
• Do not disassemble internal LED or driver components. Service only according to manufacturer instructions.
• Allow the fixture to cool before handling. Use qualified personnel for mounting and electrical connection.

Compliance

• Verify RoHS compliance status with manufacturer specification sheet.
• Verify California Title 20 / Prop 65 requirements with manufacturer specification sheet.
• cULus
• FCC
• CSA
• RoHS
• ADL Supply recommends confirming all compliance data with the official manufacturer product data sheet prior to specification or installation.