PHILIPS ADVANCE Centium ICN-1P32-N 120-277V | (1) Lamp F32T8 Electronic Ballast | Instant Start

Philips Advance Centium ICN1P32N is a high-efficiency electronic ballast designed to operate a single T8 fluorescent lamp. Featuring IntelliVolt technology for 120-277V operation and a low-profile housing, this ballast is a versatile solution for commercial retrofits and maintenance in office, retail, and industrial environments.

Product Overview

The Philips Advance Centium series is the industry standard for T8 fluorescent lighting. The ICN1P32N utilizes instant-start technology to provide immediate illumination and maximum energy savings. Designed with striation-reduction circuitry, it ensures a stable and consistent light output even when used with energy-saving lamps, making it a reliable choice for areas where light quality is critical.

• IntelliVolt Technology: Operates on any input voltage from 120V to 277V, simplifying installation and reducing the need to stock multiple ballast models.
• Lamp Striation Reduction: Advanced circuitry minimizes the "snaking" or flickering often seen in T8 lamps, particularly energy-saving 25W, 28W, and 30W models.
• High Efficiency: Meets NEMA Premium efficiency standards, helping facilities reduce energy consumption and qualify for utility rebates.
• Quiet & Clean: Features a Total Harmonic Distortion (THD) of less than 10%, ensuring minimal electrical interference with sensitive equipment.

Technical Specifications

• Brand: Philips Advance
• Model: ICN-1P32-N (ICN1P32N)
• Ballast Type: Electronic
• Starting Method: Instant Start
• Input Voltage: 120-277V
• Input Frequency: 50/60 Hz
• Lamp Wiring: Parallel
• Ballast Factor: Normal (0.88)
• Max Case Temp (T-Case): 70°C
• Housing Style: N-Case (Low Profile)
• Dimensions: 9.50" (L) x 1.30" (W) x 1.00" (H)
• Compliance: RoHS, FCC Part 18, UL Listed, CSA Certified

Compatible Lamps

This ballast is engineered to operate (1) lamp from the following T8 fluorescent families:

• F32T8: Standard (32W), 30W, 28W, and 25W Energy Saving models
• F25T8: 3-foot fluorescent lamps
• F17T8: 2-foot fluorescent lamps
• U-Bend: FB32T8 and FB31T8 lamps

Before You Order

• Check Your Lamp Count: This ballast is specifically for 1-lamp fixtures. If your fixture has two, three, or four lamps, you will require the ICN2P32N, ICN3P32N, or ICN4P32N respectively.
• Instant Start Wiring: Ensure your fixture sockets (lampholders) are compatible with instant-start wiring. Instant-start ballasts typically use "shunted" sockets.
• Physical Dimensions: At 9.5 inches long, verify the mounting center measurements inside your fixture to ensure a proper fit.
• No Dimming: This is a fixed-output ballast and is not compatible with dimming switches or systems.

Additional Information

Philips Advance Centium ballasts are favored by electrical contractors for their long-term reliability and ease of installation. Their compact, lightweight design makes them ideal for modern, low-profile troffers and wrap-around fixtures. For facilities transitioning to LED, this ballast is also compatible with "Type A" (ballast-compatible) T8 LED tubes, though checking the LED manufacturer's compatibility list is always recommended.