Product Overview
Universal VS M701227CK5EUF Code #188166.02 70W-120-277V Feet Mount Standard Size Electronic Metal Halide Ballast & Side lead exit Use To Operate (1) 70W-M/C98 M/C139 M/C143 HID Lamp
- Resonance Start
- RoHS Compliant
- Active power factor correction
- Ansi Code M98,M139, or M143
- Microprocessor controlled
- (F) Feet Mount (Side lead exit)
- Universal Order Code 188166.02
- Voltage : 120-277V +/-10%, 50/60Hz
- DIM: (L) 5.51in (W) 3.62in x (H) 1.57in
- 5-Lead Wires (Black, White, Green,Blue, Red)
- Spec Sheet
Additional Information
- Energy Efficient
- Greater than 20% increase in efficiency
- Lowers lighting operation costs
- Full Light Output
- Provides same light levels as magnetic ballasts being replaced
- Quiet Operation
- Significantly quieter than magnetic ballasts
- High Frequency Operation
- No lamp flickering
- Light Weight - Low Profile Case
- Simplifies transportation & installation
- Less interference with ballast channel cover during replacement
- Slimline Ballasts Feature Parallel Lamp Operation
- When one lamp fails, other lamp remains lit
- Instant start electronic ballast for long lamp starting cycles and low initial cost
- RoHs Compliant
- UL Type 1 Outdoor
Performance:
• EOL Protection
• Meets ANSI Standard C82.14-2006
• Meets ANSI Standard C62.41-1991
• Meets FCC Part 18C for EMI & RFI (non-consumer)
Safety:
• No PCBs
• Thermal Protection
• C/UR/US recognized component
Each lamp's lead wires must be run in a separate minimum 1/2" ID conduit from the input
leads to achive good EMI performance and maximum remote capabilities. Individual ,
unbundled lead wires must be used for extension wiring using wire types SF-2 or SFF-2
or equivalent. Power cords and MC cables are not acceptable extension wiring methods.
