Universal M5012-27CK-5EU-JT3

(No reviews yet) Write a Review
$97.42
SKU:
UNVIM5012-27CK-5EU-JT3
UPC:
18861302
Availability:
discontinued
Shipping:
Calculated at Checkout

Product Overview

universallogo.gif

Vossloh Schwabe M501227CK5EUJT3 Multi-volt IDTP 500W Metal Halide Electronic J Stud Mount Ballast & Bottom lead exit Use To Operate (1) 50W M148/M110 Ceramic Metal Halide Lamp

Product Details

  • Ansi Code M148,M110
  • Active power factor correction
  • Microprocessor controlled
  • (J) Stub mount (bottom lead exit)
  • Compatible with 3 or 4 wire IDTPs
  • Extra-long 36” Wire lead lengths
  • Universal Order Code 188613.02
  • Voltage : 120-277V  +/-10%, 50/60Hz
  • DIM: (L) 5.02in (W) 3.62in x (H)1.57in
  • IDTP "tap" Function: Provides 120V to heaters of IDTPs.
  •  Operation with IDTP is now universal voltage rated for 120-277V.
  • Can be operated as normal HID ballast with tap lead capped-off
  • for entire 120V to 277V input voltage range
  • 6-Lead Wires (Purple,Black, White, Green,Blue, Red)
  • Spec Sheet

 

Additional Information

  • Energy Efficient
  • Greater than 20% increase in efficiency
  • Lowers lighting operation costs
  • Full Light Output
  • Provides same light levels as magnetic ballasts being replaced 
  • Quiet Operation
  • Significantly quieter than magnetic ballasts 
  • High Frequency Operation
  • No lamp flickering 
  • Light Weight - Low Profile Case
  • Simplifies transportation & installation
  • Less interference with ballast channel cover during replacement
  • Slimline Ballasts Feature Parallel Lamp Operation
  • When one lamp fails, other lamp remains lit
  • Instant start electronic ballast for long lamp starting cycles and low initial cost
  • RoHs Compliant
  • UL Type 1 Outdoor

 

Performance:

• EOL Protection
• Meets ANSI Standard C82.14-2006
• Meets ANSI Standard C62.41-1991
• Meets FCC Part 18C for EMI & RFI (non-consumer)

Safety:

• No PCBs
• Thermal Protection
• C/UR/US recognized component
 
 
Each lamp's lead wires must be run

in a separate minimum 1/2" ID conduit from the input
leads to achive good EMI performance and maximum remote capabilities. Individual ,
unbundled lead wires must be used for extension wiring using wire types SF-2 or SFF-2
or equivalent. Power cords and MC cables are not acceptable extension wiring methods.

 

Reviews

(No reviews yet) Write a Review