GE 4535 #24735 PAR46 30W 6.4V

GE 4535 #24735 — PAR46 Pin Spot Sealed Beam Lamp, 30W 6.4V

The GE 4535 (order code 24735) is a 30W 6.4V PAR46 sealed beam lamp listed in GE's Miniature, Sealed Beam and Automotive Lamps catalog under the application “Pin Spot”. Rated life is 100 hours.

Select this lamp by matching the GE lamp number, order code, voltage, wattage, base style, and beam pattern to the installed fixture. Confirm compatibility before ordering.

Product Overview

A PAR46 sealed beam lamp has its filament, reflector, and lens factory-sealed as one unit, so the beam pattern is fixed by the lamp. Beam spread, intensity, voltage, and base style therefore determine which lamp number is correct for a given fixture, and like-for-like replacement is the safest approach.

GE lists this lamp (no. 4535) in its catalog under “Pin Spot”. Catalog beam spread is given to 10% of maximum beam candlepower (MBCP).

Technical Specifications

Typical Applications

• Catalog application: Pin Spot
• Replacement in fixtures that specify GE lamp no. 4535
• 6.4V systems rated for 30W per lamp
• Fixtures that accept a PAR46 lamp with Screw Terminals (per the catalog)

Before Ordering Verify

• GE Order Code: Confirm the installed lamp or fixture documentation calls for GE 4535 / order code 24735.
• Electrical Rating: Confirm the fixture operates at 6.4V and 30W.
• Base Type: Confirm the socket or connector matches Screw Terminals.
• Beam Pattern: Confirm the required beam spread (20° H x 4° V).
• Physical Fit: Verify MOL (3.75 in) and fixture clearance before ordering.
• Burn Position: The catalog does not list a burn position for this lamp. Follow the fixture manufacturer's instructions.
• Catalog Footnote 167: Filament shielded.

Safety & Installation Guidelines

• Qualified Installation: Install by qualified personnel following fixture and site procedures.
• Disconnect Power: De-energize circuits before installing or removing the lamp.
• Use Correct Replacement: Do not substitute lamps unless the fixture manufacturer permits it.
• Allow Cooling: Let the lamp and fixture cool before handling.

No GE warning or caution notice is listed for this lamp in the catalog. Follow the precautions above and the fixture manufacturer's instructions.

Wholesale & Project Support

ADL Supply supports maintenance teams, electrical contractors, and procurement departments with GE lamp sourcing, project quoting, and replacement identification assistance.

For volume pricing, availability, or help confirming the correct GE replacement lamp, contact ADL Supply at 1-800-235-3489.