GE Current 93313181 LED/6-18/DR/D4L Type C LED Tube Remote Driver 72W 4-Tube 0-10V Dimmable

Current / GE 93313181 LED/6-18/DR/D4L – Type C LED Tube Remote Driver | 72W Max | 120-347 VAC | Up to 4 Tubes | 0-10V Dimmable

The Current / GE 93313181 LED/6-18/DR/D4L is a remote LED driver for Current Type C LED tubes. It accepts 120-347 VAC line input and delivers 26-34 VDC Class 2 low-voltage DC to the lampholders, supporting a maximum of 4 tubes at up to 72W total input. Output is 6-18W selectable per tube, and the driver is 0-10V dimmable. This is an accessory: it does not include tubes and is required for Type C tubes to operate.

Technical Specifications

Product Overview

Every Type C installation needs a remote driver, and the driver — not the tube — is what determines system wattage, dimming behavior, and how many lamps a single control point can serve. The 93313181 handles up to 4 tubes at 72W maximum input, running on 120-347 VAC.

Type C is an external-driver LED tube architecture. The tube itself contains no internal driver; a dedicated remote LED driver converts line voltage to low-voltage Class 2 DC and feeds the lampholders directly. Existing fluorescent ballasts must be removed and the fixture rewired to the remote driver before these tubes will operate. This arrangement is what allows 0-10V dimming and field-tunable output across an entire installation from a small number of control devices.

Output is field-tunable. A bank of switches on the side of the driver sets system watts per lamp before installation, so the same tube can be commissioned at different light levels in different spaces. Current specifies that LumenChoice drivers be set to the desired output before installation rather than adjusted afterward, and the lumen values corresponding to each setting are published in the tube specification tables. The factory default setting is 12W per tube.

Compatible Applications

• New Type C LED tube installations in troffers, wraps, and strip fixtures
• Fluorescent retrofits where the ballast is removed and the fixture rewired to low-voltage DC
• Projects requiring 0-10V dimming or integration with occupancy and daylight controls
• Replacement of a failed driver in an existing Type C system
• Dry and damp location fixtures within the driver's -4°F to 104°F operating range

Before Ordering – Verify

• Confirm the tube count per driver. This unit is rated for a maximum of 4 tubes; exceeding that is not permitted.
• Confirm the wattage range matches the tubes. This driver provides 6-18W selectable per tube, and the LumenChoice 6-18W, 8-16.5W, and fixed 36W drivers are not interchangeable.
• Confirm the supply voltage falls within 120-347 VAC. Driver models in this family differ on input range.
• Confirm there is physical space for the driver at 9.5 in. L x 1.7 in. W x 1.2 in. H, either inside the fixture or in a remote enclosure.
• Confirm the ambient temperature at the driver location stays within -4°F to 104°F.
• Confirm tubes are ordered separately; this driver ships without lamps.
• If replacing an existing driver, match the order code rather than assuming another model in the family will drop in.
• Carton quantity is 10, which is also the manufacturer minimum order quantity.

Safety and Handling Guidelines

• De-energize the circuit before wiring or replacing the driver.
• Installation should be performed by a qualified electrician in accordance with the National Electrical Code and local codes.
• Set output switches before installation and before energizing the circuit.
• Observe the Class 2 output wiring requirements between the driver and the lampholders.
• Do not exceed the rated maximum tube count or input wattage on a single driver.
• Mount the driver where ambient temperature stays within its rated range and airflow is not obstructed.
• Label the converted fixture so future service personnel do not attempt to install a ballast-driven lamp.

Compliance

• Class 2 low-voltage DC output
• Power factor greater than 0.9
• 0-10V dimming compatible
• Rated for -4°F minimum and 104°F maximum operating temperature
• Specifications per Current Lighting Solutions datasheet GEL193_R14; information and specifications subject to change without notice
• All values are design or typical values measured under laboratory conditions

Ordering Information

• Order code: 93313181
• Description / product code: LED/6-18/DR/D4L
• ADL Supply SKU: 93313181-LED/6-18/DR/D4L
• Carton quantity: 10 (minimum order quantity)
• Serves up to 4 Type C LED tubes at 6-18W selectable per tube
• Tubes sold separately
• Project and case quantities available

For wholesale pricing, bulk availability, or help confirming the correct replacement lamp, contact ADL Supply at 1-800-235-3489.