Halco 25601 MBUL-JB-WH Junction Box Housing for Mini Bullet Flood White EPDM Form 4 Plugs 4 Screws Grounding Screw

Halco 25601 MBUL-JB-WH – Junction Box Housing for Mini Bullet Flood | White | EPDM Form, 4 Plugs, 4 Screws, 1 Grounding Screw

The Halco 25601 MBUL-JB-WH is a junction box housing in a white finish for the Halco Mini Bullet Flood Series. It ships with an EPDM form, 4 plugs, 4 screws, and 1 grounding screw. The housing provides the wiring compartment and mounting point for J-Box installation of the fixture. This is an accessory sold separately — no fixture is included.

Technical Specifications

Product Overview

The Halco Mini Bullet Flood Series mounts either to a junction box or to a ground stake, and neither is supplied with the fixture. That is deliberate: the same luminaire serves a planting bed and a building facade, and the mounting hardware is what adapts it. Choosing the right accessory is therefore part of specifying the fixture, not an afterthought.

This is the junction box housing in a white finish, which provides the wiring compartment and the structural mounting point for J-Box installation. It ships with an EPDM form that creates the weather seal, four plugs for closing unused openings, four screws, and a dedicated grounding screw.

The housing and the cover are separate SKUs, both offered in bronze, white, and black to match the fixture finishes. A complete J-Box installation generally requires both, so check what is already on site before ordering — a replacement job may need only one of the two.

Compatible Applications

• J-Box mounting of a Mini Bullet Flood to a wall, soffit, or structure
• Building facade and signage lighting installations
• Small-area security lighting on structures
• Installations requiring a weather-sealed wiring compartment
• Replacement of a damaged junction box housing on an existing installation

Before Ordering – Verify

• This is an accessory only. No fixture is included.
• Confirm the finish matches the fixture. This housing is white; the series is offered in bronze, white, and black.
• Confirm whether a junction box cover is also required. The housing and the cover are separate SKUs.
• Confirm the mounting surface will accept the housing and carry the fixture load.
• Seat the EPDM form correctly on installation; the weather seal depends on it.
• Use the grounding screw provided and close unused openings with the supplied plugs.

Safety and Handling Guidelines

• Disconnect power at the breaker before installing or servicing the fixture or its mounting hardware.
• Installation should be performed by a qualified electrician in accordance with the National Electrical Code and local codes.
• Ground the installation properly. Outdoor circuits should be GFCI protected where required by code.
• Seat all gaskets and EPDM forms fully; the weather rating of the installation depends on them.
• Close all unused openings with the supplied plugs.
• Do not overtighten screws into the die-cast or aluminum components.
• Verify the assembly is weather-sealed before energizing, particularly in wet locations.
• Route and protect below-grade or exposed wiring in accordance with code.

Compliance

• Accessory for the Halco Mini Bullet Flood Series; refer to the fixture for listings and ratings
• The fixture is cETLus listed, wet location rated, IP65, FCC, and RoHS compliant
• Correct installation of the supplied gasket and plugs is required to maintain the fixture’s wet location and IP65 ratings
• Specifications per the Halco Mini Bullet Flood Series spec sheet, Rev 05/01/26; all sizes and specifications subject to change without notice

Ordering Information

• Halco product SKU: 25601
• Product code: MBUL-JB-WH
• ADL Supply SKU: HAL25601
• UPC: 807154256013
• Manufacturer description: Junction box housing, white, with EPDM form, 4 plugs, 4 screws and 1 grounding screw
• Ground stake: SKU 25599, MBUL-GS-BZ, bronze only
• Junction box housings: SKU 25600 (bronze), 25601 (white), 25602 (black)
• Junction box covers: SKU 25603 (bronze), 25604 (white), 25605 (black)
• Compatible fixtures: SKU 25590 (bronze), 25591 (white), 25592 (black)
• Sold separately; fixture not included

For wholesale pricing, bulk availability, or help confirming the correct fixture or accessory, contact ADL Supply at 1-800-235-3489.