Halco 25604 MBUL-CV-WH Junction Box Cover for Mini Bullet Flood White EPDM Form 2 Plugs 4 Screws

Halco 25604 MBUL-CV-WH – Junction Box Cover for Mini Bullet Flood | White | EPDM Form, 2 Plugs, 4 Screws

The Halco 25604 MBUL-CV-WH is a junction box cover in a white finish for the Halco Mini Bullet Flood Series. It ships with an EPDM form, 2 plugs, and 4 screws. The cover closes and weather-seals the junction box housing. This is an accessory sold separately — no fixture or housing is included.

Technical Specifications

Product Overview

The Halco Mini Bullet Flood Series mounts either to a junction box or to a ground stake, and neither is supplied with the fixture. That is deliberate: the same luminaire serves a planting bed and a building facade, and the mounting hardware is what adapts it. Choosing the right accessory is therefore part of specifying the fixture, not an afterthought.

This is the junction box cover in a white finish, which closes the housing and completes the weather seal. It ships with an EPDM form, two plugs, and four screws.

The cover is not a standalone enclosure — it pairs with the matching junction box housing, which is a separate SKU. Both are offered in bronze, white, and black to match the fixture finishes. For a new installation order both; for a repair, order only the damaged part.

Compatible Applications

• Closing and weather-sealing a Mini Bullet Flood junction box housing
• J-Box mounted facade, signage, and security lighting installations
• Replacement of a damaged or missing cover on an existing installation
• Finish changes where the fixture is being repainted or the scheme updated

Before Ordering – Verify

• This is an accessory only. No fixture or junction box housing is included.
• Confirm the finish matches the fixture and housing. This cover is white; the series is offered in bronze, white, and black.
• Confirm the matching junction box housing is present or ordered. The cover is not a standalone enclosure.
• Seat the EPDM form correctly on installation; the weather seal depends on it.
• Close unused openings with the supplied plugs.

Safety and Handling Guidelines

• Disconnect power at the breaker before installing or servicing the fixture or its mounting hardware.
• Installation should be performed by a qualified electrician in accordance with the National Electrical Code and local codes.
• Ground the installation properly. Outdoor circuits should be GFCI protected where required by code.
• Seat all gaskets and EPDM forms fully; the weather rating of the installation depends on them.
• Close all unused openings with the supplied plugs.
• Do not overtighten screws into the die-cast or aluminum components.
• Verify the assembly is weather-sealed before energizing, particularly in wet locations.
• Route and protect below-grade or exposed wiring in accordance with code.

Compliance

• Accessory for the Halco Mini Bullet Flood Series; refer to the fixture for listings and ratings
• The fixture is cETLus listed, wet location rated, IP65, FCC, and RoHS compliant
• Correct installation of the supplied gasket and plugs is required to maintain the fixture’s wet location and IP65 ratings
• Specifications per the Halco Mini Bullet Flood Series spec sheet, Rev 05/01/26; all sizes and specifications subject to change without notice

Ordering Information

• Halco product SKU: 25604
• Product code: MBUL-CV-WH
• ADL Supply SKU: HAL25604
• UPC: 807154256044
• Manufacturer description: Junction box cover, white, with EPDM form, 2 plugs, 4 screws
• Ground stake: SKU 25599, MBUL-GS-BZ, bronze only
• Junction box housings: SKU 25600 (bronze), 25601 (white), 25602 (black)
• Junction box covers: SKU 25603 (bronze), 25604 (white), 25605 (black)
• Compatible fixtures: SKU 25590 (bronze), 25591 (white), 25592 (black)
• Sold separately; fixture not included

For wholesale pricing, bulk availability, or help confirming the correct fixture or accessory, contact ADL Supply at 1-800-235-3489.