Sollos P90-TB-20 27530 90° Right Angle Path Light 20" Stem Textured Black

Sollos P90-TB-20 (27530) 90° Right Angle Path Light – 20" Stem, Textured Black

The Sollos P90-TB-20 (product number 27530) is a 12V AC low-voltage, right-angle "P90°" path light with a die-cast aluminum head and a 20" stem, finished in Textured Black. The fixture uses a clear polycarbonate lens, a stepped threaded collar for tool-less relamping, and a ceramic G4 bi-pin socket rated for lamps up to 20 watts. It ships with a 36" 18-2 lead wire, two King® DryConn™ waterproof connectors, and an 8" ground stake. This is a fixture-only assembly; the lamp is ordered separately. Confirm finish, lamp inclusion, and transformer capacity before ordering.

Technical Specifications

Product Overview

The Sollos P90° is a right-angle path light: a 20" straight stem terminating in a die-cast aluminum head bent at 90 degrees, aiming the lamp downward onto walkways and garden edging rather than through a mushroom-style hat. The design keeps the light source shielded from direct view while throwing a tight, low pool of light along the ground – well suited to narrow paths and formal edging where a wide hat silhouette is not wanted.

The housing is finished in Textured Black UV- and corrosion-resistant powder coat. The collar is stepped and threaded so the head can be opened by hand for relamping without tools, and a clear threaded polycarbonate lens protects the lamp. The ceramic G4 bi-pin socket accepts JC bi-pin lamps up to 20 watts.

The fixture ships with a 36" 18-2 lead wire, two King DryConn waterproof connectors, and an 8" ground stake. It operates on a 12V AC landscape transformer, which is ordered separately along with the lamp.

Compatible Applications

• Narrow walkway and garden edging illumination
• Driveway and paver-edge lighting where a low, discreet fixture profile is preferred
• Residential and commercial landscape lighting on a 12V AC circuit
• Formal garden beds, hardscape borders, and entry paths
• Retrofit replacement for existing right-angle 12V path fixtures

Before Ordering – Verify

• This is a 12V AC low-voltage fixture. It will be destroyed if connected to 120V line voltage. A 12V landscape transformer is required and is not included.
• Socket is G4 bi-pin, not GU5.3 MR16 and not GU10. MR16 and GU10 lamps will not fit this fixture.
• The lamp is not included. Order a JC G4 bi-pin lamp separately, 20W maximum – the Halco ProLED JC3/830/OMNI/IP65/LED (Halco product 81996) is the manufacturer-matched kit lamp for this fixture.
• Confirm finish: this item is Textured Black. Also offered in P90-TZ-20, P90-AB-20.
• Antique Brass carries a lifetime warranty; Textured Black and Textured Bronze carry a 5-year warranty – confirm which finish before ordering if warranty terms matter to the buyer.
• Total the wattage of every fixture on the run and size the transformer accordingly, allowing headroom for future additions.
• ProLED lamps may not be compatible with every dimming system; test on the actual circuit before completing a full installation.

Safety and Handling Guidelines

• De-energize the transformer before wiring, relamping, or servicing the fixture.
• Make all splices with the supplied King DryConn waterproof connectors and keep connections out of standing water.
• Bury or otherwise protect the low-voltage cable run to prevent damage from mowers, edgers, and digging.
• Do not exceed the 20W maximum lamp rating. Overlamping causes excess heat, socket damage, and lens degradation.
• Drive the ground stake into soil only; do not hammer on the fixture housing or stem.
• Keep the lens clear of mulch, soil, and dense foliage so heat can dissipate.
• This fixture contains no mercury; the LED kit lamp is mercury-free.

Compliance

• ETL Listed to UL 1838 (Low Voltage Landscape Lighting Systems) and CSA C22.2 No. 250.7.
• Intended for use on Class 2 / low-voltage landscape lighting circuits supplied by a listed 12V landscape transformer.
• Install in accordance with the National Electrical Code and all applicable local codes; NEC Article 411 governs low-voltage lighting systems.
• Kitted lamp (Halco JC3/830/OMNI/IP65/LED) is IP65-rated for direct exposure to rain or irrigation spray and is RoHS compliant; the fixture-only version carries no published IP rating for the fixture body – pair with an IP65 ProLED lamp for wet-exposed installs.
• Mercury-free product. RoHS-compliant construction.
• All specifications are subject to change by the manufacturer; the current Sollos published specification governs.

Ordering Information

• Order code: P90-TB-20  |  Sollos product number: 27530  |  ADL Supply SKU: SOLL27530
• Configuration: 90° right-angle path light, 20" stem, Textured Black, 12V AC, G4 bi-pin, 20W max.
• Supplied as fixture only. Lamp ordered separately.
• Included with every fixture: 8" ground stake, 36" 18-2 lead wire, two King DryConn waterproof connectors.
• Manufacturer-matched kit lamp: Halco JC3/830/OMNI/IP65/LED (Halco 81996), 2.5W / 20W-equivalent, 3000K, 10-15V input, IP65, 15,000 hours life. Also available in this series: JC1/830/OMNI/IP65/LED (81998, 1.2W, 110 lm) and JC2/830/OMNI/IP65/LED (81999, 2.0W, 200 lm).
• Also available: P90-TZ-20, P90-AB-20, and the kitted-with-lamp equivalent of this finish.
• Related Sollos new-arrival families: PBL Bollard Path Light (16" stem) and PTH075 Adjustable Base Path Light.
• Warranty: 5-year limited warranty on Textured Black finish.

For wholesale pricing, bulk availability, or help confirming the correct replacement lamp, contact ADL Supply at 1-800-235-3489.