Philips Advance 71A6572-001

The Philips Advance Core & Coil 71A6572-001 (71A6572001A) Ballast Kit is an industrial-grade magnetic HID transform gear module engineered to drive a single 1000W Metal Halide lamp. Outfitted with a versatile Quad-Tap input matrix supporting 120V, 208V, 240V, or 277V branch lines, this robust Constant Peak Autotransformer (CWA) circuit configuration delivers maximum current stability to heavy commercial setups. Ideal for arena sports layouts, industrial high-bays, distribution hubs, shipping ports, and high-intensity outdoor area floodlights, this kit includes a premium oil-filled capacitor and matching structural mounting brackets to ensure quick field retrofits and minimal facility downtime.

ADL Supply Expert Application & Replacement Guide

The Philips Advance 71A6572-001 magnetic assembly is a rugged industrial maintenance standard specified heavily across heavy-duty manufacturing plants, outdoor sports stadiums, shipping terminal yards, and high-ceiling logistics warehouses. Utilizing high-permeability steel laminations vacuum-impregnated with a tight layer of precision-wound copper magnet wire, this ballast offers exceptional heat dissipation profiles and long service life across intense, continuous-use operational environments.

Critical Quad-Tap Multi-Wire Splicing Regulations and HPS Incompatibility: Electrical installers executing routine fixture replacements must verify line configurations and circuit wiring parameters closely prior to striking an arc: this magnetic core is engineered strictly for 1000W Metal Halide lamps operating under ANSI code M47 or legacy H36 Mercury Vapor lines. Do not connect this ballast to 1000W High-Pressure Sodium (HPS) lamps, as HPS requires a high-voltage auxiliary solid-state ignitor loop which is completely absent from this kit.

Furthermore, because this is a mechanical Quad-Tap transformer rather than an electronic auto-ranging module, installers must tap the single dedicated wire lead that matches the fixture's incoming supply voltage line (120V, 208V, 240V, or 277V). All unused voltage lead wires must be individually capped off using high-temperature wire nuts and insulated with heavy electrical tape. Because the secondary windings interact across a shared magnetic track, active use causes unused leads to step up and act as energized lines. Leaving bare wire ends exposed inside the metal junction box will cause immediate grounding arcs, device failure, or fatal electrical shock hazards to future service technicians.

Detailed Product Specifications

• Brand Name: Philips Advance (Signify Corporate Group / Hid-Core-Coil Line)
• Product Series Line: Magnetic HID Core & Coil Replacement Kit
• Philips Advance Factory Ordering Part Code SKU: 71A6572-001
• Alternative Industrial Manufacturing Code: 71A6572001A
• Core Technology Class: Magnetic HID Transformer Ballast
• Circuit Classification Scheme: Constant Wattage Autotransformer (CWA / Voltage Regulation Profile)
• Target Lamp Wattage Load: 1000 Watts (Single HID Lamp Loading)
• Certified Target HID Lamp Compatibility: 1000W Quartz Metal Halide / 1000W Probe-Start MH
• Mandatory Lamp ANSI Cross-Reference: M47 (Also matches legacy H36 Mercury Vapor tracking lines)
• Nominal Operational Grid Voltages: 120V / 208V / 240V / 277V Multi-Tap AC Lines
• Utility Line Frequency Threshold: 60 Hz
• Operating Amperage Profile (120V Input Line): 9.00 Amperes circuit load current
• Operating Amperage Profile (208V Input Line): 5.20 Amperes circuit load current
• Operating Amperage Profile (240V Input Line): 4.50 Amperes circuit load current
• Operating Amperage Profile (277V Input Line): 3.90 Amperes circuit load current
• Open Circuit System Base Voltage: 430 Volts AC continuous striking line potential
• Total System Power Draw: 1080 Watts (80W core conversion overhead loss profile)
• Power Factor Level: High Power Factor corrected network (Greater than 0.90)
• Audible Component Noise Rating: Class E (Industrial High Intensity Sound Track baseline)
• Core Insulation Heat Temperature Rating: Class H (Up to 180°C maximum thermal barrier tolerance)
• Capacitor Specifications: 24.0 Microfarad (µF) / 480V AC operating oil-filled running capacitor module
• Compliance Certifications: UL Recognized Component, CSA Certified, RoHS Compliant, EISA Compliant

Certified System Mounting & Enclosure Profile Dimensions

• Core Stack Length Face: 6.00" Inches (152.4mm actual transformer block length)
• Core Stack Width Profile: 4.25" Inches (108.0mm actual magnetic stack section width)
• Core Base Section Height: 4.30" Inches (109.2mm actual vertical stack thickness)
• Transformer Assembly Net Weight: 21.45 lbs (Heavy commercial grade ballast coil)
• Maximum Remote Mounting Field Distance: Up to 50 feet away from the socket using 14AWG solid copper lines

Commercial Equipment Industry Cross-References

This premium 1000W multi-tap CWA metal halide core ballast serves as a direct drop-in replacement or equivalent for the following lines:

• Sylvania Quicktronic Alternative: M1000/NUMT-CWA / Core & Coil Metal Halide Kit
• Universal Triad Match: M1000481C000K / 1000W Quad-Tap Magnetic Core Block
• GE Lighting Reference: GEM1000MLTAA4-5 / Multi-Volt CWA probe start core unit
• Grainger Reference: 1000W MH HID Transformer Core / SKU 5HC47

Bulk Commercial Lighting Supply & Project Support

ADL Supply handles volume distribution shipments, multi-pack logistics, and contractor project quotes for procurement teams, schools, and warehouse facilities nationwide.

For specialized contractor pricing tiers, job-site pallet deliveries, or comprehensive submittal documentation, contact our support team directly at 1-800-235-3489. We are your commercial supply partners as an authorized wholesale Lighting Distributor In Doral, Florida.