Philips Advance IOP3P32HLN

Product Overview

Philips Advance IOP3P32HLN35M Optanium T8 Electronic Ballast – 2/3 Lamp F32T8 | 120–277V | Instant Start | 0.89 BF

The Philips Advance IOP3P32HLN35M Optanium T8 is an electronic fluorescent ballast designed to operate compatible 2- or 3-lamp F32T8 fluorescent systems. It features IntelliVolt-style 120–277V operation at 50/60Hz, instant-start ignition, parallel lamp operation, a nominal ballast factor of 0.89, power factor of 0.98, and maximum THD of 10%. Philips also identifies this ballast as suitable for outdoor use and equipped with automatic restart. Before ordering, verify the exact ballast model, number of lamps, F32T8 lamp type, input voltage, wiring configuration, ballast factor, mounting dimensions, and fixture requirements.

Lamp Type

F32T8

32W T8

Lamp Count

2 / 3

Parallel Operation

Input Voltage

120–277V

50/60Hz

Start Type

Instant

0.1 sec Nominal

Ballast Factor

0.89

PF 0.98

Technical Specifications

Brand	Philips Advance
Product Family	Optanium T8 Instant Start
Base Model	IOP3P32HLN
Order Code	IOP3P32HLN35M
Order Product Name	OPTANIUM ELE BALLAST (3) F32T8 120-277V
Ballast Technology	Electronic Fluorescent
Lamp Type	F32T8
Number of Lamps	2 or 3 lamps
Rated Lamp Wattage	32W
Input Voltage	120–277V
Input Frequency	50–60Hz
Starting Method	Instant Start
Ignition Time	0.1 seconds nominal
Ballast Factor	0.89 nominal
Power Factor	0.98 nominal
Maximum THD	10%
Lamp Current Crest Factor	1.6 nominal
Nominal Input Power	110–108W
Lamp Connection	Parallel
Wire Gauge	18 AWG nominal
Wire Type	Solid
Remote Wiring	Allowed
Tandem Wiring	Allowed
Through Wiring	Allowed
Maximum Ballast-to-Lamp Distance	Energy-saving lamps: 6 ft / Standard lamps: 20 ft
T-Case Maximum	70°C
Housing Material	Metal
Housing Type	N
Dimensions	9.50 in L × 1.30 in W × 1.00 in H
Mounting Length A2	8.90 in
Suitable for Outdoor Use	Yes
Automatic Restart	Yes
Sound Rating	A
EMC Standard	FCC Non-Consumer
Material Number / 12NC	913701255102
EAN / UPC	781087133194
Quantity per Pack	1 ballast
Packs per Outer Box	30

Product Overview

The Philips Advance Optanium IOP3P32HLN35M is a commercial electronic T8 ballast engineered for compatible two- and three-lamp F32T8 fluorescent fixtures. Its 120–277V input range and 50/60Hz capability allow one ballast model to support common commercial line voltages without selecting separate 120V or 277V versions.

Instant-start operation provides rapid lamp ignition, while the ballast’s parallel lamp wiring allows individual lamp branches to operate independently within the approved wiring configuration. The nominal 0.89 ballast factor is intended for standard-output applications where energy efficiency and controlled fixture light output are priorities.

The Optanium platform also incorporates lamp striation-reduction technology and supports remote, tandem, and through-wiring configurations. Maximum ballast-to-lamp distance depends on the lamp type: Philips specifies up to 6 feet for energy-saving lamps and up to 20 feet for standard lamps.

Compatible Applications

Commercial F32T8 fluorescent fixtures
2-lamp F32T8 luminaires
3-lamp F32T8 luminaires
Office and commercial ceiling fixtures
Retail and institutional T8 lighting systems
Warehouse and facility-maintenance applications
Outdoor-rated luminaires where the complete fixture is suitable for the environment
Maintenance replacement where Philips Advance IOP3P32HLN or order code IOP3P32HLN35M is specified

Before Ordering – Verify

Base model: Confirm IOP3P32HLN.
Order code: Verify IOP3P32HLN35M.
Lamp type: The supplied Philips datasheet confirms F32T8 lamps.
Lamp count: This ballast is rated for 2 or 3 lamps. The supplied datasheet does not confirm four-lamp operation.
Voltage: Confirm the branch circuit is within 120–277V.
Frequency: Rated for 50/60Hz operation.
Starting method: This is an instant-start ballast, not programmed start.
Ballast factor: Confirm that a nominal 0.89 BF matches the fixture and required light output.
Wiring: Lamp connection is parallel. Follow the exact Philips Advance wiring diagram.
Remote wiring: Observe the maximum ballast-to-lamp distance for the specific lamp type.
Dimensions: Verify 9.50 inches long × 1.30 inches wide × 1.00 inch high and an 8.90-inch mounting dimension.
Temperature: Do not exceed the 70°C maximum ballast case temperature.
Previous listing compatibility claims: F17T8, F25T8, F28T8, F32T8/ES, and FB31T8 operation are not confirmed by the supplied product-specific datasheet and should not be assumed without another Philips compatibility table.

Safety and Installation Guidelines

Disconnect and lock out electrical power before installation or service.
Use only with lamp types and quantities approved for the exact ballast model.
Follow the Philips Advance wiring diagram for parallel lamp connections.
Confirm line voltage is within the 120–277V operating range before energizing.
Do not exceed the published maximum ballast-to-lamp wiring distance.
Maintain the ballast case temperature below the specified 70°C maximum.
Secure the metal ballast housing to the luminaire using the proper mounting points.
Inspect lampholders, wiring, and grounding before replacing the ballast.
Do not install damaged ballasts or units with exposed conductors.
Installation should be performed by qualified electrical personnel in accordance with applicable electrical codes and the fixture manufacturer’s instructions.