Product Overview

Osram Sylvania NAED 54706 CYV 1000W 120V G38 – 1000W/120V | 3200K Warm White | 27,500 lm | G38 Mogul Bi-Post

The Osram Sylvania NAED 54706 CYV 1000W 120V G38 is a 1000W 120V SSTV (Stage, Studio & Theater) halogen lamp delivering 27,500 initial lumens, CRI 100, base, 200-hour rated life, color temperature. UPC: 46135547065.

Wattage/Volt

1000W

SSTV Halogen

ANSI Code

CYV

Lumens

27,500

Initial lm

Color Temp

3200K

CRI 100

Rated Life

200

Hours

Quick Specs

Brand: Sylvania
Item / Catalog Number: 1000T7Q4CL-CYV
UPC / EAN: 46135547065
Lamp Type: SSTV Halogen — Stage, Studio & Theater
Wattage: 1000W
Base Type: G38 Mogul Bi-Post
Color Temperature: 3200K Warm White
Operating Voltage: 120V
CRI: 100
Initial Lumens: 27,500 lm
Rated Average Life: 200 hours
Overall Length (MOL): 196 mm
Filament: C-13D

Product Overview

The Osram Sylvania NAED 54706 CYV 1000W 120V G38 is a 1000W 120V SSTV halogen lamp for professional stage, studio, and theater lighting applications. At with CRI 100, the C-13D filament delivers consistent photometric output appropriate for film, broadcast, and live performance fixtures requiring maximum tungsten output at rated voltage.

Operating at 120V requires correct voltage supply — operating above rated voltage significantly shortens lamp life in an already short (200-hour) service cycle. Do not touch the quartz envelope with bare hands — skin oils cause hot spots leading to premature failure. Use gloves or lint-free cloth; clean with isopropyl alcohol if touched.

Applications

Stage and theatrical lighting – Professional fixtures including ellipsoidals, Fresnels, and PAR units requiring 1000W 120V halogen at .
Film and broadcast production – Studio and on-set fixtures where tungsten-balanced halogen output at matches camera white balance requirements.
Concert and touring lighting – Touring production rigs requiring reliable high-output halogen replacement at 120V operating voltage.

Replacing Your Current SSTV Halogen Lamp?

Voltage — 120V: This lamp is rated 120V. Verify your fixture supply circuit is 120V. Operating above rated voltage shortens lamp life significantly.
Base type — : Verify your fixture uses lampholders. Note that G9.5, GY9.5, and GX9.5 are different pin specifications — confirm the exact designation with fixture documentation.
Do not touch quartz envelope with bare hands: Skin oils cause hot spots leading to premature failure or lamp burst. Use gloves or lint-free cloth. Clean with isopropyl alcohol if touched accidentally.
Allow cool-down before replacement: Allow at least 15 minutes after switch-off before handling.