Product Overview
![]()
The Sylvania 58733 100Q/CL/MC 130V is a 100W 130V single-ended tungsten halogen T4 lamp engineered for accent and architectural lighting, display cases, museum exhibits, retail gallery spotlights, cove lighting, and decorative fixture applications requiring a compact E11 miniature candelabra base. Delivering 2,800 initial lumens of approximately 2950–3000K warm white output at 100 CRI through an E11 base, this ANSI JD-coded lamp provides a 2,000-hour rated service life — with the extended service life characteristic of a 130V-rated halogen lamp operated on a standard 120V circuit.
|
Wattage
100W
130V Halogen
|
Initial Lumens
2,800 lm
100 CRI
|
Color Temp
~2950K
Warm White
|
Base
E11
ANSI JD
|
Rated Life
2,000 Hr
130V Rated
|
ADL Supply Expert Application & Replacement Guide
The Sylvania 58733 is primarily used by electrical contractors, facility maintenance teams, and lighting designers for replacement in accent track heads, architectural cove systems, display case spotlights, museum and gallery fixtures, and retail accent luminaires using the E11 miniature candelabra base halogen T4 platform. This lamp is rated at 130V — designed for operation on standard 120V circuits where the slight under-voltage operation extends filament life compared to a 120V-rated lamp at the same wattage. Lumen output on a 120V supply will be nominally lower than the rated 2,800 lm (which is measured at 130V), and the color temperature will read slightly cooler than the rated value. The E11 base uses 11mm thread diameter — not interchangeable with E12 candelabra or E26 medium screw bases; confirm the fixture socket is specifically E11 before ordering. Note that the source lists 2950K in the title and 3000K in the spec list — confirm the exact color temperature with the Sylvania specification sheet before partial relamping if color consistency across adjacent fixtures is required.
Before You Order
|
Verify Before Ordering
E11 Mini-Can Socket — Not E12 or E26 | 130V Rated — Designed for 120V Circuit Operation | Color Temp Listed as Both 2950K and 3000K — Confirm with Spec Sheet
Confirm your fixture socket is E11 miniature candelabra (11mm thread) — not E12 or E26. This is a 130V-rated lamp for use on standard 120V circuits; do not install on 130V+ supplies. Color temperature is listed as 2950K in the title and 3000K in the spec list — confirm with the Sylvania specification sheet before partial relamping. Never handle the quartz envelope with bare skin.
|
Detailed Product Specifications
- Brand: Sylvania (Ledvance)
- Product Line Series: Super-Q Halogen — E11 T4 Single-Ended
- Sylvania Order Code: 58733
- ANSI Code: JD
- UPC Barcode: Confirm with Sylvania specification sheet
- Core Technology: Tungsten-Halogen T4 Clear Single-Ended
- Wattage: 100W
- Rated Voltage: 130V (designed for 120V circuit operation)
- Initial Lumens: 2,800 lm (at 130V rated)
- Color Temperature (CCT): Approximately 2950–3000K Warm White — confirm with Sylvania specification sheet
- Color Rendering Index (CRI): 100 Ra
- Base Type Configuration: E11 Miniature Candelabra (11mm thread diameter)
- Bulb Shape: T4 Clear
- Maximum Overall Length (MOL): 2.75 inches (69.9mm)
- Bulb Diameter: 0.50 inches (12.7mm) — T4
- Rated Average Lifespan: 2,000 Hours
- Burn Position: Universal — Any Orientation
- Mercury Content: None — standard e-waste disposal applies
Operation, Safety & Mounting Compliance
130V Rating on 120V Circuits, E11 Base & Quartz Handling
A 130V-rated halogen lamp operates in a slightly under-driven condition on a standard 120V supply — filament temperature is nominally lower than at full rated voltage, which extends filament life beyond that of a 120V-rated equivalent but produces marginally lower lumen output and a slightly cooler color temperature. For most accent and display applications the difference is imperceptible, but in environments where precise color temperature consistency across fixtures is critical, confirm the rated CCT against the Sylvania specification sheet. The E11 base must be fully threaded into the socket until the center contact engages — do not operate the lamp with an incomplete base engagement. Never handle the quartz T4 envelope with bare skin — skin oils create localized hot spots that accelerate premature envelope failure at halogen operating temperatures.
Industry Cross-Reference Data
- GE Lighting: Q100CL/MC 130V E11 (equivalent 100W 130V E11 T4 halogen)
- Osram: 100W 130V T4 E11 Halogen (equivalent ANSI JD E11 mini-can T4)
- Ushio: JD130V-100WB E11 (equivalent 100W 130V E11 compact halogen)
- Related Sylvania SKU: 58738 — 150W 120V ESL E11 variant (different wattage and voltage; confirm specifications match your fixture rating)
- Legacy Cross-Reference: Direct replacement for ANSI JD-coded 100W 130V E11 miniature candelabra T4 halogen lamp positions in accent track, cove, gallery, display case, and architectural fixture installations
Bulk Commercial Lighting Supply & Project Support
ADL Supply delivers commercial-volume logistical fulfillment, tiered commercial contractor discounting strategies, and full pallet project quoting options to electrical accounts across the United States.
For formal wholesale inquiries, volume pricing modifications, or manufacturer spec sheet documentation, reach our commercial branch directly at 1-800-235-3489. We are your commercial supply partners as an authorized wholesale Lighting Distributor In Doral, Florida.