Product Overview

Ushio #1000247 DYJ JCD230V-650WSP – 650W | 230V | ANSI DYJ | Type: —

The Ushio #1000247 DYJ JCD230V-650WSP is a 650W 230V Halogen JC Single-Ended — Photo-Optic/SSTV lamp, ANSI DYJ, Type: — base, 200 hours rated life. Designed for professional audio/visual projection, studio, stage, and photo-optic equipment.

Wattage

650W

Halogen

Voltage

230V

Operating

Color Temp

3000K

CCT

Lumens

—

Initial lm

Rated Life

200

Hours

Quick Specs

Brand: Ushio
Ushio Catalog Number: 1000247
ANSI Code: DYJ
Lamp Type: Halogen JC Single-Ended — Photo-Optic/SSTV
Color Temperature: 3000K Warm White
Bulb Type: Halogen
Wattage: 650W
Operating Voltage: 230V
Rated Average Life: 200 hours
Base Type: G5.3 2-Pin Bipin
Filament: Type: Color
Burn / Operating Position: Base Down

Product Overview

The Ushio #1000247 DYJ JCD230V-650WSP is a 650W 230V Halogen halogen lamp for professional audio/visual projection, studio, stage, and photo-optic equipment. this lamp provides high-intensity output appropriate for professional projection, studio, and stage applications at 230V. Rated life: 200 hours.

Do not touch the quartz envelope with bare hands. Skin oils cause hot spots. Use only in approved enclosed fixtures. Allow 15 minutes cool-down before handling. Verify voltage before installing.

Applications

Professional audio/visual projection – JC halogen for projectors, stage spotlights, and studio fixtures specifying 650W at 230V.
Stage, studio, and photo-optic applications – High-intensity tungsten halogen source at for camera-balanced studio and stage production.
Retrofit and maintenance replacement – Confirm ANSI code, wattage, voltage, and base type before ordering.

Safety and Handling

Do not touch the lamp envelope with bare hands. Skin oils cause hot spots leading to premature failure or lamp burst. Use clean gloves or lint-free cloth. Clean with isopropyl alcohol if accidentally touched.
Voltage — 230V: Verify your fixture or power supply output matches the rated voltage. Operating above rated voltage significantly shortens lamp life.
Enclosed fixture only: Use only in approved enclosed optical fixtures. Exposure to lamp during operation is a UV/thermal hazard.
Allow 15-minute cool-down before replacement.