SYLVANIA CF13DSE830 | DULUX® S/E 13W 3000K Single-Tube Compact Fluorescent Lamp

The Sylvania CF13DSE830 (DULUX® S/E) is a commercial-grade, space-saving **13W single-tube compact fluorescent lamp (CFL)** engineered for low-profile architectural wall sconces, shallow recessed downlights, exit signage, and premium retail showcases. Outfitted with a specialized **2GX7 4-pin plug-in base** and a slim **T4 1/2-inch glass tube profile**, this high-performance module is purpose-built to operate seamlessly on high-frequency electronic ballasts and advanced dimming systems. Utilizing high-purity rare-earth phosphors to achieve an **82 CRI** color accuracy baseline, it projects a warm, welcoming **3000K Soft White** light spectrum. Delivering **800 initial lumens** across a dependable **10,000-hour rated service life**, this plug-in element provides an energy-efficient alternative to traditional incandescent sources within high-visibility institutional and hospitality networks.

Slim Architectural Footprint and Advanced Electronic Dimming Integration

Sylvania DULUX® S/E lamps compress a full-scale linear fluorescent chemical cycle into a tight parallel single-tube design, allowing fixtures to match strict low-profile aesthetics. Unlike standard 2-pin lamps that rely on an integrated internal starter capsule, the **4-pin 2GX7 base geometry** features separate lead paths for independent external cathode pre-heating. This mechanical configuration gives electronic high-frequency ballasts absolute control over the lamp strike sequence, allowing for smooth, flicker-free starting and full compatibility with architectural dimming circuits. It functions as an electronic equivalent to traditional 13W Dulux S modules while optimizing structural flexibility inside modern commercial downlights.

• Electronic Ballast Optimization: Explicitly engineered to operate on electronic ballast infrastructures, avoiding early lumen drop-off and maximizing ballast factor stability.
• Dynamic Dimming Capabilities: Advanced 4-pin contact alignment permits direct connection with certified analog or digital dimming controllers for localized illumination tuning.
• Volumetric Light Distribution: Compact, parallel single-twin-tube design spreads light outward over a full 360-degree envelope, preventing directional dark areas or sharp shadows inside shallow enclosures.
• Extended Lifespan Stability: Rated for **10,000 average operational hours** when calibrated on standard 3-hour utility switches; continuous commercial cycles yield extended runtime profiles.

Comprehensive Technical Specifications

• Brand Name: Sylvania
• Product Family / Series: DULUX® S/E Series
• Ordering Product Code / NAED: 20284
• Technical Abbreviation Code: CF13DSE830
• NEMA Generic Designation: CFT13W/2GX7/830
• Technology Type: Compact Fluorescent (CFL) - Plug-In
• Bulb Shape Profile: T4 Single-Tube Parallel Twin Layout (1/2-Inch / 12.7mm Tube Diameter)
• Nominal Wattage: 13W
• Base Configuration: 2GX7 (4-Pin Miniature Plug-In Interface)
• Initial Luminous Flux: 800 Lumens (Evaluated post standard 100-hour burn-in phase)
• Color Temperature: 3000K (Soft White / Warm Accent Spectrum)
• Color Rendering Index (CRI): 82
• Average Rated Service Life: 10,000 Hours (Based on standardized 3-hour cycling thresholds)
• Maximum Overall Length (MOL): 6.2 Inches (157.5 mm)

System Integration, Ballast Matching & Handling Safeguards

• Electronic Power Grid Requirements: This 4-pin lamp cannot interface directly with 120V or 277V raw building mains, nor will it seat in legacy 2-pin magnetic ballast sockets. It must operate exclusively via matching high-frequency electronic ballasts. Minimum operational ambient starting parameters are determined by the host ballast framework; verify exterior temperature specifications prior to non-insulated commercial installations.
• End-of-Life (EOL) Protective Circuitry: In accordance with industry guidelines, high-frequency sub-miniature fluorescent systems should be paired with electronic ballasts that feature **automatic EOL shutdown protective networks**. This safeguard cuts active terminal current if a cathode degrades, protecting the miniature 2GX7 base from structural overheating.
• Glass Maintenance & Handling Protocols: Always shut off line voltage at the breaker panel before replacing lamps or cleaning fixtures. Allow the glass shell to cool for 10 minutes to avoid contact burns. Handle the tube by its plastic base mold whenever possible; do not exert excessive twisting force on the quartz/glass tubes during socket seating to prevent cracking.
• Responsible Disposal Recycling: This commercial lamp contains trace quantities of mercury vapor necessary for high-efficiency operation. Do not dispose of it in ordinary community waste bins. For local corporate recycling points and regulatory guidelines, visit **www.lamprecycle.org**.

Recommended Professional & Commercial Applications

• Architectural Wall Sconces: Perfect for hospitality corridors, elevator lobbies, and restaurant common pathways requiring a soft, decorative warmth.
• Shallow Downlights & Task Stations: Highly suited for low-profile workplace cubicle overhead fixtures, under-cabinet assemblies, and compact retail displays.
• Public Space Signage & Enclosures: Ideal replacement lamp engine for safety exit signs, architectural showcases, and weather-sealed exterior walkway bollards.