Product Overview
The Ushio 1001106 JPD25V-150WG1 Photo-Optic Lamp is a premium, high-precision double-ended linear quartz halogen bulb meticulously engineered for medical equipment, laboratory microscopy, and specialized dental operatory fixtures. Operating at 150 watts on a discrete 25-volt low-voltage threshold, this high-performance T5 clear lamp outputs 2,700 initial lumens of comfortable 2900K soft white light. Outfitted with an industry-standard R7s recessed single contact base array and an advanced CC-8 coiled-coil tungsten filament core, it provides an extended 3,000-hour rated average service life under high-demand clinical duty cycles.
|
Wattage
150W
Linear Halogen
|
Voltage
25V
Low-Voltage
|
Brightness
2,700 lm
Initial Output
|
Base Type
R7s
Double Ended
|
Rated Life
3,000
Avg. Hours
|
ADL Supply Expert Application & Replacement Guide
The Ushio JPD25V-150WG1 (1001106) lamp is a highly specialized photo-optic linear instrument specifically engineered for medical and clinical diagnostic systems. This genuine factory clear double-ended module serves as the primary standard replacement light capsule specified inside Pelton & Crane Light Fantastic I, II, and III dental operatory lamps. Its stable warm white output ensures accurate, glare-free tissue identification and color space reproduction under demanding operating conditions.
Critical Circuit and Insertion Parameters for Maintenance Techs: This lamp operates on an exact, current-stabilized **25V low-voltage circuit footprint**. Attempting to wire or test this linear tube directly on residential 120V line loops will prompt instantaneous tungsten filament vaporization, destroying the quartz sleeve. Installers must verify that the base clips align perfectly with the un-shunted R7s (Recessed Single Contact) layout slots. It features a universal burning position calibration, permitting secure horizontal or angular mounting profiles within modern reflective instrument envelopes.
|
Verify Before Ordering
25V Low-Voltage Input & Double-Ended R7s Base Requirements
This model measures precisely 2.626 inches (66.7 mm) in Maximum Overall Length (MOL) from contact to contact. It is not a standard line-voltage bulb. Confirm your diagnostic machinery or dental light incorporates an operational 25V step-down transformer before checking out your cart. This is an unshielded quartz envelope; national health and life safety codes require installation **strictly inside approved, fully enclosed fixture housings**.
|
Detailed Product Specifications
- Brand: Ushio America (Authorized Factory Stock)
- Product Series Line: Linear Double-Ended Halogen Series
- Ushio Catalog Reference Part SKU: 1001106
- Manufacturer Description Code: JPD25V-150WG1 FUSED
- Alternative Industry Model Identifiers: Q150T4/CL 25V / JPD-0150
- ADL Reorder Part Number: BC2381
- UPC Barcode Number: 048777172667
- Core Technology Type: Tungsten-Halogen (Double-Ended Linear)
- Primary Industry ANSI Code: Coded Under Reference Standard 60901-IEC-2562-2
- Operational Wattage: 150 Watts
- Nominal System Input Voltage: 25 Volts (Transformer Dependent)
- Initial Luminous Brightness: 2,700 Lumens
- Luminous Efficacy: 18 Lumens per Watt (LPW)
- Color Temperature Configuration: 2900K Warm White
- Color Rendering Index (CRI): 100 Ra (Flawless Spectral Output Representation)
- Glass Bulb Profile Envelope: Clear T5 Tubular Finish Shape
- Base Configuration: R7s Recessed Single Contact (R7s-18 Ceramic Blueprint)
- Tungsten Filament Core Structure: CC-8 Stable Horizontal Coiled Coil
- Maximum Overall Length (MOL): 2.626" Inches (66.7mm Contact to Contact)
- Bulb Nominal Diameter (DIA): 0.591" Inches (15.0mm)
- Base Face to Top of Lamp: 5.800" Inches (147.3mm)
- Rated Average Lifespan: 3,000 Hours (Constant Voltage Scale)
- Chassis Burn Position Limit: Universal — Operates Safely in Any Orientation
- Standard Factory Case Pack: 20 Units per Box
Operation, Safety & Mounting Compliance
Thermal Management and Handling Care
Because high-output 150W linear quartz elements generate intense localized thermal envelopes and high internal structural pressures, always isolate core machinery power lines and permit a full 20-minute cooling intermission before executing re-lamping sweeps. Ensure fixture mounting spring clips remain clean and responsive to eliminate arc-resistance heating along the outer terminal pads.
Quartz Glass Preservation and Contamination Prevention
Never handle the clear T5 glass body wrapper with bare skin during installation. Human fingers deposit microscopic alkaline body oils that combine chemically with quartz glass structures during active thermal cycles. This contamination forms localized hot spots, leading to rapid envelope devitrification, early clouding, micro-fractures, and premature pressure failure. Always handle the bulb using clean tech gloves, a microfiber lint-free cloth, or its protective plastic wrap sleeve. Clean meticulously with isopropyl alcohol if accidental baseline skin tracking takes place.
Specialty Equipment Cross-References
- Pelton & Crane Replacement Part: 015204 (For Light Fantastic I / II / III Dental Arms)
- Donar Specialty Lighting: 28100 / DN-28100
- Generic Industry Nomenclature: Q150T4/CL 25V
Bulk Commercial Lighting Supply & Project Support
ADL Supply handles volume logistics management, tiered commercial contractor pricing models, and full pallet project quotes for facility teams, municipal procurement agents, and electrical accounts nationwide.
For professional contractor tiered discounts, full pallet freight distributions, or dedicated technical submittal specification sheets, reach our support center directly at 1-800-235-3489. We are your commercial supply partners as a dedicated wholesale Lighting Distributor In Doral, Florida.
