GE 49767 GE259MAX-N/Ultra

The GE UltraMax® N Series 49767 (GE259MAX-N/ULTRA) Ballast is a commercial-grade, multi-voltage electronic control gear module engineered to operate one or two 8-foot standard or energy-saving F96T8 linear fluorescent lamps. Designed for universal 120–277V systems, this high-performance ballast utilizes optimized Instant Start technology to deliver immediate, flicker-free ignition while minimizing systemic energy draw. Outfitted with an active power factor correction circuit and independent parallel lamp operational paths, this normal ballast factor (0.87 BF) module serves as the industry standard for industrial 8-foot strip fixtures, warehouse lighting arrays, parking garages, and utility distribution setups.

ADL Supply Expert Application & Replacement Guide

The GE UltraMax 49767 control gear is a heavy-duty industrial facility footprint standard specified heavily by commercial electrical contractors, real estate engineering teams, and facility maintenance divisions handling broad 8-foot luminaire runs. Operating with an optimized high-frequency solid-state framework, this module delivers full light extraction across long-run applications while slitting overhead utility power drops. The normal 0.87 ballast factor represents the ideal architectural baseline—delivering balanced, full-rated lumen punch without over-driving fixtures or inflating monthly utility costs.

Critical Shunted Lampholder Mandate & Parallel Circuit Boundaries: Field electricians executing routine facility lighting swaps must evaluate socket configurations closely prior to termination: this Instant Start electronic ballast requires shunted lampholders at all terminal connection points. Shunted sockets incorporate an internal metal bridge that joins the left and right pin tracks, allowing the ballast to send its immediate high-voltage strike slice across the gas column cleanly. Inserting an Instant Start ballast into un-shunted sockets (common in Programmed Start fixtures) will break the output pathway, causing ignition failure, high-resistance arc faults, or immediate terminal component damage.

Furthermore, this module utilizes a premium Parallel Lamp Operational architecture. Unlike legacy series-wired ballasts where a single filament blowout kills the entire fixture loop, this control gear operates independent channels. If a single lamp drops out inside a 2-lamp layout, the remaining tube continues to burn at full efficacy, dramatically slashing operational labor tracking costs by allowing maintenance teams to structure routine group re-lamping sweeps.

Detailed Product Specifications

• Brand: GE Lighting (Current Lighting Solutions / UltraMax® Commercial Division)
• Product Series Line: UltraMax® N High-Efficiency Universal Instant Start T8 Series
• GE Factory Product Order Code SKU: 49767
• Manufacturer Description Model: GE259MAX-N/ULTRA
• UPC Barcode Number (GTIN-12): 043168497671
• Core Technology Class: Solid-State High-Frequency Electronic Ballast
• Starting Method Classification: Instant Start (Optimized for maximum efficiency and long runtimes)
• Lamp Wiring Selection Architecture: Parallel Circuit Operation (Lamps run independently)
• Nominal Operational Input Voltage: 120V to 277V (Direct Line Multi-Volt Auto-Sensing)
• Continuous Input Voltage Security Range: 108V Minimum to 305V Maximum Branch Line Tolerances
• Line Current Frequency Threshold: 50 / 60 Hz
• Systemic Ballast Factor (BF): 0.87 Normal Ballast Factor Performance Scale
• Total Harmonic Distortion (THD) Limit: Less than 10% (Commercial Grade Electrical Isolation)
• Power Factor Correction Level: Active Correction Network (Greater than 0.98)
• Audible Component Sound Rating: Class A (Whisper Quiet Architectural Standard; 20–24 dB range)
• Minimum Operating Ambient Temperature: -22°F (-30°C / Cold Temperature Storage Performance)
• Maximum Case Temperature Rating (Tc): 70°C (158°F)

Certified System Load Matrix (Lamping Matrix)

This multi-lamp controller is fully certified to strike and manage the following tube configurations safely. Do not mix linear lengths or differing wattages on the same ballast terminal line:

• (1 or 2 Lamps) F96T8: Standard 59W 8-foot (96-inch) linear fluorescent lamps
• (1 or 2 Lamps) F96T8/WM: High-efficiency reduced wattage 8-foot energy-saving lamps (57W codes)
• (1 or 2 Lamps) F96T8/WMP: High-efficiency reduced wattage 8-foot energy-saving lamps (54W codes)
• (1 or 2 Lamps) F96T8/49W: Ultra-low wattage 8-foot energy-saving lamps (49W codes)
• (1 or 2 Lamps) F72T8: Standard 55W 6-foot (72-inch) linear fluorescent lamps
• (1 or 2 Lamps) F40T8: Standard 40W 5-foot (60-inch) linear fluorescent lamps

Operation, Safety & Mounting Compliance

High-Frequency Electronic Signal Transformation

This electronic assembly converts raw municipal alternating current into high-frequency ballast outputs exceeding 42 kHz, completely eliminating stroboscopic workplace eye fatigue and structural flickering loops common in old low-frequency magnetic systems. It incorporates an automated active surge insulation barrier that blocks standard utility switching transients and operational spikes from breaking down sensitive internal solid-state board capacitors.

Chassis Physical Structural Footprint Dimensions

• Maximum Overall Length (MOL): 9.50" Inches (241.3mm actual bracket length)
• Chassis Housing Body Length: 8.89" Inches (225.8mm actual shell length)
• Chassis Housing Section Width: 1.70" Inches (43.2mm actual D-Can casing width)
• Chassis Total Housing Height: 1.18" Inches (30.0mm actual vertical thickness)
• Center Mounting Hole Distance: 8.89" Inches (225.8mm center-to-center slot spacing)

Commercial Control Gear Equipment Cross-References

This universal 49767 ballast serves as a premium drop-in replacement or electrical equivalent for the following models:

• Philips Advance Match: ICN-2P59-N / IOP-2P59-N Optanium Universal Multi-Volt Instant Start F96T8
• Sylvania Quicktronic Match: QHE 2X59T8/UNV ISN-SC / Professional High-Efficiency Instant Start Slim Can
• Universal Triad Alternative: B259IUNVHP-A / High-Performance Universal Voltage F96T8 2-Lamp

Bulk Commercial Lighting Supply & Project Support

ADL Supply handles volume distribution shipments, multi-pack logistics, and contractor project quotes for procurement teams, schools, and warehouse facilities nationwide.

For specialized contractor pricing tiers, job-site pallet deliveries, or comprehensive submittal documentation, contact our support team directly at 1-800-235-3489. We are your commercial supply partners as an authorized wholesale Lighting Distributor In Doral, Florida.