HALCO 25416 TruBlu Wireless Outdoor Sensor Controller | PIR + Photocell | 0-10V | PSC-ZKV-I-11H-BLE-SR-WT

PSC-ZKV-I-11H-BLE-SR-WT is a TruBlu™ Mesh passive infrared outdoor sensor-controller designed for indoor or outdoor fixture applications. This 1-channel wireless controller combines PIR motion sensing, an integrated photosensor, Bluetooth® Mesh wireless control, and 0–10V dimming in a compact Z-10 based fixture-mounted design powered by 12–24VDC.

Product Overview

This Halco TruBlu™ Mesh passive infrared outdoor sensor-controller is built for buyers who need wireless fixture-based lighting control with occupancy sensing, photocell response, and 0–10V dimming in one compact IP65-rated device. It uses Bluetooth® NLC certified Bluetooth Mesh technology for wireless luminaire control in indoor and outdoor applications.

• 1-channel PIR sensor-controller with integrated photosensor.
• Bluetooth® NLC Certified for multi-vendor interoperability.
• Wireless Bluetooth Mesh technology for fixture-based lighting control.
• Designed for mounting heights from 8 ft to 40 ft for low-bay and high-bay applications.
• Supports high-end trim, zoning, and continuous dimming.
• Z-10 0–10V base with quick connector for easier installation.
• IP65 rated for outdoor or indoor use.
• Optional active high sensor output for relay control on select models.

Technical Specifications

• Brand: Halco
• Series: TruBlu™ Mesh Passive Infrared Outdoor Sensor-Controller
• Model: PSC-ZKV-I-11H-BLE-SR-WT
• Product Code: 25416
• SKU: HAL25416
• Product Type: Wireless Outdoor Sensor-Controller
• Sensor Type: Passive Infrared (PIR) + integrated photosensor
• Channel: 1-channel
• Input Voltage: 12–24 VDC
• Current Consumption: 50 mA max
• Dimming Output: 0–10VDC, 30 mA
• Mounting: Z-10 0–10V base / quick-connect fixture mount
• Mounting Height: 8–40 ft
• Sensor Range: Up to 80 ft diameter (high bay)
• Bluetooth Range: 100 ft maximum
• Operating Temperature: -40°C to 70°C
• Ingress Rating: IP65
• Finish: White
• Certification: Bluetooth® NLC Certified
• Control Platform: Configurable via TruBlu™ web portal or iOS mobile app
• Dimensions: Approx. 3-1/8 in overall height with 1.77 in diameter body

Wiring / Connection Information

• T1: 12–24VDC+ power to sensor-controller – Red wire (ZKV-R1L receptacle)
• T2: 12–24VDC- power and 0–10VDC-/common – Black wire (ZKV-R1L receptacle)
• T3: 0–10VDC+ control signal from sensor-controller – Purple/Violet wire (ZKV-R1L receptacle)
• T4: 10–22VDC 30mA load control output (active high) – Yellow wire (ZKV-R1L receptacle)

Operation / Configuration

• Configured through the TruBlu™ web portal or iOS mobile app.
• Supports ongoing parameter adjustments after installation.
• Optional TruBlu™ Gateway enables energy monitoring and demand response.
• Integrated photo sensor enables ambient light sensing.
• Supports Bluetooth Mesh wireless dimming and fixture-based control.
• Mounts to Z-10 receptacles; receptacle is typically installed by the luminaire manufacturer and protective cap is removed prior to controller installation.

Before You Order

• Verify this is the correct outdoor Z-10 based fixture-mounted controller for your application.
• Confirm your fixture includes or supports the required ZKV-R1L / Z-10 receptacle.
• Requires 12–24VDC input power.
• Verify your driver supports 0–10V dimming.
• Confirm your mounting height and coverage needs match the selected lens pattern and application.
• Bluetooth range depends on fixture integration, surrounding environment, and installation conditions.
• Select the correct finish before ordering: White.

Additional Information

This controller is designed for TruBlu™ Mesh networked lighting systems using Bluetooth® Mesh technology. Its IP65 rating, integrated photocell, and Z-10 base make it suitable for outdoor and indoor fixture integration where wireless commissioning, occupancy sensing, and dimming control are required.