GE232MVPS-H-V03 #75383 T8 Dimming

(No reviews yet) Write a Review
$36.87
SKU:
GELG75383-01
UPC:
Condition:
New
Availability:
In Stock
Shipping:
Calculated at Checkout
HS Tariff code:
8504.10.0000

Product Overview

Official GE Lighting UltraMax Logo - ADL Supply

The GE UltraStart® N Series 75383 (GE232MVPS-N-ULTRA) Ballast is a commercial-grade, multi-voltage electronic control gear module engineered to operate one or two standard or energy-saving T8 linear fluorescent lamps. Designed for universal 120–277V systems, this high-efficiency ballast utilizes premium Programmed Rapid Start (PRS) technology to heat lamp filaments prior to gas ignition, drastically extending lamp life up to 100,000 switching cycles. Outfitted with an active power factor correction circuit, integrated anti-striation control to prevent visual tube rolling/shimmering, and independent parallel operational paths, this normal ballast factor (0.88 BF) module serves as the premier choice for occupancy-sensor controlled spaces, commercial offices, schools, and institutional maintenance sweeps.

Lamp Type
F32T8
Standard Linear
Lamp Count
1 or 2
Parallel Wiring
Input Voltage
120–277V
Universal Multi-Volt
Ballast Factor
0.88
Normal Output
Start Type
Prog. Start
Requires Un-Shunted

ADL Supply Expert Application & Replacement Guide

The GE UltraStart 75383 control gear is an industry facility footprint standard specified heavily by commercial electrical contractors, real estate engineering teams, and property maintenance divisions supporting frequently switched environments. Utilizing an optimized high-frequency circuit architecture, this ballast is engineered explicitly for fixtures paired with automated motion sensors, occupancy controls, or daylight harvesting loops. The normal 0.88 ballast factor represents the ideal architectural baseline—delivering balanced, full-rated lumen punch without over-driving fixtures or inflating monthly utility costs.

Critical Un-Shunted Lampholder Mandate & Parallel Circuit Boundaries: Field electricians executing routine facility lighting swaps must evaluate socket configurations closely prior to termination: this Programmed Rapid Start electronic ballast mandates the use of un-shunted lampholders at all terminal connection points. Un-shunted sockets isolate the electrical contact pathways, allowing the ballast to route a safe low-voltage preheating current through the tube filament cathodes before striking the primary high-voltage gas arc. Swapping a Programmed Start device into old shunted sockets (common in legacy Instant Start layouts where pins are internally bridged) will short-circuit the preheat wire networks, causing immediate ballast overheating, ignition drops, or circuit component damage.

Furthermore, this module utilizes a premium Parallel Lamp Operational architecture. Unlike legacy series-wired ballasts where a single filament blowout kills the entire fixture loop, this control gear operates independent channels. If lamp one drops out, the remaining tube continues to burn at full efficacy, dramatically slashing operational labor tracking costs by allowing maintenance teams to structure routine group re-lamping sweeps.

Verify Before Installing
Un-Shunted Sockets Mandatory — Sensor-Based Runtimes Optimized — No Mercury Content
Please pull your fixture down and confirm lampholders are un-shunted prior to completing wiring. Because this is a Programmed Start system, it is custom-tailored for occupancy sensors and frequently switched circuits, safely sustaining up to 100,000 starts. Do not substitute this device with a cheap instant start unit in sensor environments, as instant hitting without cathode preheating will prompt rapid tube end-blackening and premature lamp failure.

Mercury and Waste Compliance Notice: This product is a solid-state electronic control ballast and contains 0.0 mg of mercury. It is completely exempt from regional fluorescent shipping regulations and can be safely delivered to all 50 states. Standard commercial electronic waste (e-waste) handling guidelines apply at end-of-life cycles.

Detailed Product Specifications

  • Brand: GE Lighting (Current Lighting Solutions / UltraStart® Commercial Division)
  • Product Series Line: UltraStart® High-Efficiency Universal Programmed Start T8 Series
  • GE Factory Product Order Code SKU: 75383
  • Manufacturer Description Model: GE232MVPS-N-ULTRA
  • UPC Barcode Number (GTIN-12): 043168753838
  • Core Technology Class: Solid-State High-Frequency Electronic Ballast
  • Starting Method Classification: Programmed Rapid Start (Optimized for high-frequency switching)
  • Lamp Wiring Selection Architecture: Parallel Circuit Operation (Lamps run independently)
  • Nominal Operational Input Voltage: 120V to 277V (Direct Line Multi-Volt Auto-Sensing)
  • Continuous Input Voltage Security Range: 108V Minimum to 305V Maximum Branch Line Tolerances
  • Line Current Frequency Threshold: 50 / 60 Hz
  • Systemic Ballast Factor (BF): 0.88 Normal Ballast Factor Performance Scale
  • Total Harmonic Distortion (THD) Limit: Less than 10% (Commercial Grade Electrical Isolation)
  • Power Factor Correction Level: Active Correction Network (Greater than or equal to 0.98)
  • Ballast System Efficacy Conversion Ratio: Greater than 90% Efficiency Rating
  • Audible Component Sound Rating: Class A (Whisper Quiet Architectural Standard; 20–24 dB range)
  • Minimum Operating Ambient Temperature: -20°F (-29°C / Cold Temperature Storage Performance)
  • Maximum Case Temperature Rating (Tc): 70°C (158°F)
  • Special Feature Matrix: Anti-Striation Control (Built-in micro-choke filters to eliminate tube rolling/shimmering)
  • Safety Enclosure Rating: UL Class P Listed Component, UL Type 1 Outdoor, UL Type CC

Certified System Load Matrix (Lamping Matrix)

This multi-lamp controller is fully certified to strike and manage the following tube configurations safely. Do not mix linear lengths or differing wattages on the same ballast terminal line:

  • (1 or 2 Lamps) F32T8: Standard 32W 48-inch linear fluorescent lamps
  • (1 or 2 Lamps) F32T8/Energy-Saving: High-efficiency reduced wattage T8 lamps (25W, 28W, 30W)
  • (1 or 2 Lamps) F25T8: Standard 25W 36-inch linear fluorescent lamps
  • (1 or 2 Lamps) F17T8: Standard 17W 24-inch linear fluorescent lamps
  • (1 or 2 Lamps) F15T8: Standard 15W 18-inch linear fluorescent lamps
  • (1 or 2 Lamps) T8 U-Bend: Standard 32W U-shaped fluorescent lamps with 1-inch or 6-inch spacing
  • (1 Lamp Only) FO40: Specialized high-lumen 40W 60-inch linear fluorescent lamps

Operation, Safety & Mounting Compliance

High-Frequency Electronic Signal Transformation

This electronic assembly converts raw municipal alternating current into high-frequency ballast outputs exceeding 42 kHz, completely eliminating stroboscopic workplace eye fatigue and structural flickering loops common in old low-frequency magnetic systems. It incorporates an automated active surge insulation barrier that blocks standard utility switching transients and operational spikes from breaking down sensitive internal solid-state board capacitors.

Chassis Physical Structural Footprint Dimensions

  • Maximum Overall Length (MOL): 9.50" Inches (241.3mm actual bracket length)
  • Chassis Housing Body Length: 8.89" Inches (225.8mm actual shell length)
  • Chassis Housing Section Width: 1.30" Inches (33.0mm actual casing width)
  • Chassis Total Housing Height: 1.18" Inches (30.0mm actual vertical thickness)
  • Center Mounting Hole Distance: 8.89" Inches (225.8mm center-to-center slot spacing)

Commercial Control Gear Equipment Cross-References

This universal 75383 ballast serves as a premium drop-in replacement or electrical equivalent for the following models:

  • Universal Triad Alternative: B232PUNV-N / High-Efficiency Programmed Start T8
  • Sylvania Quicktronic Match: QTP2X32T8/UNV PSN-SC / Professional Programmed Rapid Start Small Can
  • Philips Advance Match: ICN-2P32-N-SC / Centium Universal Voltage Programmed Start T8

Bulk Commercial Lighting Supply & Project Support

ADL Supply handles volume distribution shipments, multi-pack logistics, and contractor project quotes for procurement teams, schools, and warehouse facilities nationwide.

For specialized contractor pricing tiers, job-site pallet deliveries, or comprehensive submittal documentation, contact our support team directly at 1-800-235-3489. We are your commercial supply partners as an authorized wholesale Lighting Distributor In Doral, Florida.

Reviews

(No reviews yet) Write a Review