LED80ED23.5/750 22676 — GE 80W LED HID Replacement Lamp

GE 22676 LED80ED23.5/750 - 80W LED HID Ordinary Location Replacement Lamp 5000K 12,000lm EX39 120-277V DLC Qualified

The GE Current 22676 (LED80ED23.5/750) is a professional-grade Type B LED HID retrofit lamp engineered for high efficiency in ordinary (non-hazardous) commercial and industrial environments. Delivering 12,000 initial lumens of crisp 5000K daylight white light, this 80W lamp directly replaces traditional 150W High-Pressure Sodium (HPS) or 250W Metal Halide (MH) HID lamps. It runs via internal driver ballast bypass directly on standard 120-277V line voltage, instantly wiping away ballast compatibility issues, operational hums, and future maintenance liabilities while driving energy costs down by over 60%. Built with a rugged ED23.5 physical profile and a secure EX39 mogul base, it offers seamless integration into open or enclosed standard area fixtures such as warehouse bays, gyms, or outdoor municipal setups. Its premium thermal management secures a 50,000-hour L70 operating life, ensuring over three times the service life of a standard metal halide source.

Location Ratings & Environmental Suitability

This lamp is tested and listed for dependable operation in broad non-hazardous industrial and commercial areas under standard safety codes:

• Ordinary Location Rating: Formally designed and intended for use in high-bays, parking structures, utility yards, and manufacturing facilities where explosive gases or airborne combustible fibers are not present.
• UL 1993 Environmental Compliance: Designed to meet rigid safety standards for commercial retrofits.
• Damp Location Listed: Certified to seamlessly handle indoor or outdoor locations that are normally or periodically subject to condensation of moisture in, on, or adjacent to electrical equipment.
• Important Fixture Warning: This model is explicitly not suitable for air-tight explosive environments or classified hazardous location fixtures. For hazardous-zone requirements, please consult sibling family specifications under GE Current guide LEDL089.

Technical Specifications

Product Overview

The GE Current 22676 is a robust, high-performance LED retrofit solution designed to replace power-hungry high-intensity discharge systems in standard industrial properties. Leveraging advanced active cooling engineering, this lamp outputs an omnidirectional light distribution matching legacy HID source footprints while packing high lumens into a compact, easily clearable housing profile. The 5000K daylight white delivery establishes enhanced visibility, high contrast, and safe operational conditions across shop floors, commercial parking facilities, and high-ceiling structures. By transitioning to a Type B line-direct configuration, you drop up to 175 watts per fixture off your electrical grid and permanently erase ballast failure calls from your facility budget. This unit is packaged complete with an in-box safety tether kit for added structural security during overhead installation projects and a fused misapplication protection system.

Minimum Enclosure Specifications

To preserve maximum diode lifecycle and internal cooling paths, this lamp requires the following physical enclosure clearances during installation:

• Minimum Compartment Volume: 367 cubic inches.
• Approximate Rectangular Space Requirements: 9 inches x 6 inches x 7 inches (23 cm x 16 cm x 18 cm).

Typical Applications

• Standard warehouses, commercial storage bays, and material handling spaces.
• Industrial machine rooms, fabrication spaces, and non-classified assembly corridors.
• Parking lot shoe-box fixtures, wall packs, and covered canopy perimeters.
• Gymnasiums, large municipal halls, and public utility workshops.
• Commercial high-voltage setups running 120-277V frameworks looking for fast utility validation using verified DLC rebate avenues.

Before Ordering – Verify

• Location Classification: Confirm your space is an ordinary location. This lamp is not approved for hazardous zone wiring profiles where gases or flammable particles are consistently present.
• Voltage Check: This model operates directly across general 120V up to 277V systems. For dedicated high-voltage 277-480V lines, check sibling SKU 93154642.
• Ballast Bypass Directives: The incoming HID ballast must be completely bypassed or physically removed by a professional installer before placing this LED into the socket. Wiring direct line voltage to an active ballast will result in immediate gear failure.
• Socket Pattern: Verify that your destination fixture housing contains a heavy-duty EX39 mogul base receiver socket.
• Dimmer Constraints: Avoid using this item on common building wall dimmers. Dimming control is strictly reserved for specialty external Variac systems.

Safety and Handling

This product utilizes direct line commercial electrical supply connections. Installation should always be managed by a qualified commercial technician in adherence to current local safety codes. Ensure power paths are disconnected at the primary panel board and verified dead via voltage testers before handling loose copper lines. Allow operational systems a cooldown index before carrying out physical maintenance cycles.

Compliance

• Electrical Certification: cULus Listed under regulatory standards.
• Environmental Safety: Damp Location certified per UL 1993 criteria.
• Sustainability Criteria: RoHS compliant materials; manufactured completely lead and mercury-free.
• Efficiency Backing: DLC qualified product listing matching regional efficiency thresholds.
• Performance Verification: Equivalency metrics matched against certified NEMA LS 20037-2024 calculation rules.
• Patent Backing: Manufactured under verified protections of U.S. Patents 10,788,163 and 10,508,776.

Ordering Information

Upgrading legacy HID structures requires proper planning across physical spaces, structural volumes, and direct line electrical feeds. For architectural layout assistance, detailed energy-saving cost reviews, or wholesale lot quotes on comprehensive warehouse upgrades, contact our technical service center at ADL Supply: 1-800-235-3489.