Product Overview

Sylvania 54523 GLE 750W 115V – 750W/115V | GLE | 3050K Natural White | 17,400 lm | G9.5 Bipin
The Sylvania 54523 GLE 750W 115V is a 750W 115V SSTV (Stage, Studio & Theater) halogen lamp — ANSI GLE delivering 17,400 initial lumens, CRI 100, base, 1,500-hour rated life, 3050K Natural White color temperature. UPC: 46135545238.
Wattage/Volt 750W SSTV Halogen | ANSI Code GLE | Lumens 17,400 Initial lm | Color Temp 3050K CRI 100 | Rated Life 1,500 Hours |
Quick Specs
- Brand: Sylvania
- Item / Catalog Number: 750W115VGLE
- UPC / EAN: 46135545238
- ANSI Code: GLE
- Lamp Type: SSTV Halogen — Stage, Studio & Theater
- Wattage: 750W
- Base Type: G9.5 Bipin
- Operating Voltage: 115V
- Color Temperature: 3050K Natural White
- CRI: 100
- Initial Lumens: 17,400 lm
- Rated Average Life: 1,500 hours
- Overall Length (MOL): 4.1in x DIA 0.75in
- Burn / Operating Position: s 90
- Filament: C-13D
Product Overview
The Sylvania 54523 GLE 750W 115V is a 750W 115V SSTV halogen lamp for professional stage, studio, and theater lighting applications. ANSI GLE classification. At 3050K Natural White with CRI 100, the C-13D filament delivers consistent photometric output appropriate for film, broadcast, and live performance fixtures requiring maximum tungsten output at rated voltage.
Operating at 115V requires correct voltage supply — operating above rated voltage significantly shortens lamp life in an already short (1,500-hour) service cycle. s 90 burn position — verify fixture orientation before installing. Do not touch the quartz envelope with bare hands — skin oils cause hot spots leading to premature failure. Use gloves or lint-free cloth; clean with isopropyl alcohol if touched.
Applications
- Stage and theatrical lighting – Professional fixtures including ellipsoidals, Fresnels, and PAR units requiring 750W 115V halogen at 3050K Natural White.
- Film and broadcast production – Studio and on-set fixtures where tungsten-balanced halogen output at 3050K Natural White matches camera white balance requirements.
- Concert and touring lighting – Touring production rigs requiring reliable high-output halogen replacement at 115V operating voltage.
Replacing Your Current SSTV Halogen Lamp?
- ANSI code — GLE: Verify your fixture specifies ANSI GLE. Adjacent ANSI codes are not interchangeable even at the same wattage.
- Voltage — 115V: This lamp is rated 115V. Verify your fixture supply circuit is 115V. Operating above rated voltage shortens lamp life significantly.
- Burn position — s 90: Verify fixture mounting orientation matches this burn position requirement.
- Base type — : Verify your fixture uses lampholders. Note that G9.5, GY9.5, and GX9.5 are different pin specifications — confirm the exact designation with fixture documentation.
- Do not touch quartz envelope with bare hands: Skin oils cause hot spots leading to premature failure or lamp burst. Use gloves or lint-free cloth. Clean with isopropyl alcohol if touched accidentally.
- Allow cool-down before replacement: Allow at least 15 minutes after switch-off before handling.
Ordering Information
- Brand: Sylvania
- Item / Catalog Number: 750W115VGLE
- UPC / EAN: 46135545238
- Wattage / Voltage: 750W / 115V
- Base:
- ANSI Code: GLE
- Case quantities and bulk pricing: Contact ADL Supply for volume orders.
Safety and Compliance
- Verify RoHS compliance with manufacturer specification sheet.
- Verify applicable FDA radiation performance compliance for your application.
- Verify Prop 65 warning requirements with manufacturer specification sheet.
- This lamp contains mercury — dispose per local lamp recycling regulations. Visit lamprecycle.org.
ADL Supply recommends confirming all specifications with the manufacturer product data sheet prior to specification or installation.