Product Overview
Sylvania 49130 QTP2x54T5HO/UNV PSN QUICKTRONIC ProStart 1-2 Lamp F54T5HO 120-277V Programmed Start Ballast
The Sylvania 49130 QTP2x54T5HO/UNV PSN is the leaded-wire version of the QUICKTRONIC ProStart T5HO universal-voltage ballast for one- or two-lamp F54T5HO applications. It operates from 120-277V, uses programmed start operation, and provides a normal 1.00 ballast factor. The ballast also supports compatible FT55DL, FPC55, and L58T8 lamp types. Verify lamp type, lamp count, ballast wiring, and enclosure dimensions before ordering.
|
VOLTAGE
120-277V
Universal Input
|
LAMP COUNT
1 or 2
F54T5HO
|
START TYPE
Programmed
ProStart
|
BALLAST FACTOR
1.00
Normal Output
|
THD
<10%
Low Harmonic
|
Technical Specifications
| Brand | Sylvania / OSRAM Sylvania |
| Item Number | 49130 |
| Ordering Abbreviation | QTP2x54T5HO/UNV PSN |
| Series | QUICKTRONIC ProStart T5HO Universal |
| Model Configuration | Leaded / wired model |
| Primary Lamp Type | FP54T5HO / F54T5HO |
| Number of Lamps | 1 or 2 |
| Also Operates | FT55DL, FPC55, L58T8 |
| Input Voltage | 120-277V AC |
| Voltage Tolerance | ±10% of rated input |
| Input Frequency | 50/60 Hz |
| Starting Method | Programmed Start |
| Circuit Type | Series |
| Ballast Factor | 1.00 |
| Input Current | 1.00A at 120V / 0.43A at 277V |
| System Lumens | 10,000 lumens with 2 lamps; 5,000 lumens with 1 lamp |
| Input System Power | 121/118W with 2 lamps; 61W with 1 lamp |
| System Efficacy | 83/85 lm/W with 2 lamps; 82 lm/W with 1 lamp |
| Lamp Frequency | >40 kHz |
| Lamp CCF | Less than 1.6 |
| Total Harmonic Distortion | <10% |
| Power Factor | >98% |
| Minimum Starting Temperature | -20°F (-29°C) for QTP2x54T5HO models |
| Maximum Case Temperature | 70°C |
| Remote Mounting | Red leads up to 18 ft; keep blue leads under 10 ft |
| Dimensions | 16.73 in L × 1.18 in W × 0.87 in H |
| Mounting Length | 16.34 in |
| Package Quantity | 10 pieces for leaded model |
| Certifications | UL Listed Class P, Type 1 Outdoor, Type CC; CSA Certified; FCC 47 CFR Part 18 Non-Consumer |
| Sound Rating | Class A |
| Transient Protection | ANSI C62.41 Category A |
| Safety Technology | QUICKSENSE dynamic end-of-lamp-life sensing with auto reset after lamp replacement |
Product Overview
Sylvania QUICKTRONIC ProStart T5HO ballasts are designed for PENTRON HO, PENTRON HO Circline, and DULUX L T5 fluorescent systems. The 49130 leaded model supports one- or two-lamp operation and provides full lumen output with a normal 1.00 ballast factor.
PROStart programmed-start technology provides controlled lamp starting for applications with frequent switching, including occupancy sensors and building control systems. QUICKSENSE technology monitors lamp end-of-life conditions and shuts the system down to help protect lamp bases and sockets.
Compatible Applications
- Commercial and retail lighting
- Hospitality and institutional facilities
- New construction
- Direct and indirect lighting
- Surface-mount fixtures
- Cove lighting
- Occupancy-sensor applications
- Building lighting control systems
Before Ordering – Verify
- Confirm manufacturer item number 49130 and QTP2x54T5HO/UNV PSN configuration.
- Confirm that a leaded/wired ballast is required; item 49130 is the leaded version associated with item 49131.
- Confirm the lamp is F54T5HO / FP54T5HO or another manufacturer-approved compatible lamp type.
- Confirm whether the fixture will operate one or two lamps.
- Verify 120-277V input voltage.
- Confirm the 16.73 in × 1.18 in × 0.87 in ballast enclosure fits the fixture.
- Verify the 16.34 in mounting length.
- For remote wiring, keep red leads within 18 ft and blue leads under 10 ft.
Safety and Handling Guidelines
- Disconnect power before installation, inspection, or service.
- Install according to the ballast wiring diagram, NEC requirements, and applicable electrical codes.
- Maintain proper ballast grounding.
- Do not exceed the manufacturer remote-mount wiring limits.
- Operation below 50°F may affect lamp output or lamp operation even though the QTP2x54T5HO model is rated for starting down to -20°F.
- Use lamp types and lamp quantities approved for this ballast configuration.
Compliance
- UL Listed Class P
- Type 1 Outdoor
- UL Type CC
- CSA Certified
- FCC 47 CFR Part 18 Non-Consumer
- Class A sound rating
- ANSI C62.41 Category A transient protection
Ordering Information
- Manufacturer item number: 49130
- Ordering abbreviation: QTP2x54T5HO/UNV PSN
- Configuration: Leaded-wire model
- Primary lamp: F54T5HO / FP54T5HO
- Lamp quantity: 1 or 2
- Package quantity: 10 pieces
- Series: QUICKTRONIC ProStart T5HO Universal
- QUICKTRONIC products are covered by the QUICK 60+ system warranty; refer to the manufacturer warranty bulletin for terms and conditions.
For wholesale pricing, bulk availability, or help confirming the correct replacement ballast, contact ADL Supply at 1-800-235-3489.
